• demo recorded

  • Toggle A-170 time range to bring synth sound in and out

  • PM Filter QCV & FCV fully counterclockwise

  • Cutoff ~2 o'clock

  • wiggle Z4000 decay knob!

  • moving delay clock knob is awesome!


reference track: eurorack_52mono.aif

quadlfo in 4lfo mode

1st and 2nd lfos very slow

4th lfo same as echophon clock

3rd lfo 1/2 of 4th lfo (more or less)

notes: if you engage maths' 4th channel Cycle mode , you get fuller tone (not plucked)

wiggling reneé's y-cv attenuator brings variation in the sequence

turning Triatt's second knob fully CW brings cascading, out of tone pitches in the sequenced delays

 


Thread: #29 cuba jam

There are several timbres:

227e A and C ate the Balanced Modulator (Lower part of 285e)

227e B is Bass from 261e, first filtered (B), then VCA'd (A) through 292e

227e D is timbrally very rich, a great complement to (and the same timing as) the bass in 227e B.

281e A goes to 292e A, B, D and Balanced Modulator Timbre input

281e C is the main clock

the 227e's submixer's "in th mix" is disabled to avoid bleed-through, but must be enabled to get the signal from the 207e's output

DON'T change the timing (281e C)!

play slowly with the sequencer (manually) on the 291e. The sequencer is also the same timing as Bass (282e C)

 

To Do:

tweak the 291e for a more convincing sequence


z3000 at 313hz


z3000 at 313hz


Hi guys - this is a first pass at learning how to use this site - very cool, eh? I made a quick patch, using the new Oakley modules we just received. I documented the patch as you can see, and uploaded an audio example of it to Soundcloud - enjoy!


Thread: Ascent

http://soundcloud.com/337is/ascent-remastered



Thread: Patch #1

here's audio of the patch:


Thread: Patch #1

Here's a video of the above patch...


This is the patch of the lead synth.


Thread: 2013.ES.02a


Thread: Drum Track

gotta ping all the 4ms stuff.  


Chinese Mathematics


ZDSP

24-bit LFSR Generator (noise source)

 

Sport Modulator

Top processor set to CYC ON

Bottom processor set to MODE B. 

 

Quantimator

Chord Mode

Chord 03

 

Orville

43 Reverbs - Chambers || 12 Chambers2

 

 

Voltage Tweaker


ZDSP

Dragonfly Delay Card

Preset 1: Mono Delay

Voltage Tweaker


ZDSP

Dragonfly Delay Card

Preset 1: Mono Delay

Voltage Tweaker


RESERVED FOR DETAILS

Voltage Tweaker


Beautiful!


ZDSP

24-bit LFSR Generator (noise source)

 

Sport Modulator

Top processor set to CYC ON

Bottom processor set to MODE B. 

 

Quantimator

Scale Mode

Scale 03

 

Audio runs out through a E580 Resampling Mini Delay not pictured.

 

Soundcloud

 

Voltage Tweaker


sounds like this without the 410:


q106 1: range 4' frequency +0.6 

q106 2: range 2' frequency +0.1 pulse width level 8.2 width 5.2 

noise output level 0

mixer #1 = 10 ; #2 = 6.4 ; #3 = 10

q109 pulse width envelope A 3.6 D 8.2 S 10 R 2.4

q107 Level 0 frequency 5.8 reseonance level 0 resonance 1.6 signal input level 5 

q109 vca envelope A 3 D 10 S 9.2 R 2.5 

q108 vca linear response gain 0 control #1 level 10

top mult = pitch from ribbon

bottom mult = pressure from ribbon


Top Mult group = pitch (r2m CV1)

Bottom Mult Group = pressure (r2m CV2)

 

VCA Control input 2 = Silent way Voice Controller out 2 (Motu analog 4 out)

 


q106 1: Frequency range either 16' or 8' Frequency as close to 0, a=440 as possible

q106 2: Frequency range either 8' or 4' Frequency as close to q106 1 as possible without hard sync for subtle harmonic beating PW level =2 width = 5

Mixer 1 and 2 not set louder than 8

Filter envelope: A7 D5.9 S3.9 R4.8

VCA envelope: A1.6 D1 S10 R4

Filter Level +2 Frequency Cutoff around 5 oclock Resonance 2 Level 5

VCA gain = 0 Control #1 Level = 10


The patch cords that touch the wood frame are inputs and outputs that connect to a Mackie 1202 mixer and/or a Furman patchbay for additional processing.

Voltage Tweaker


Thread: Chopper

Copied this patch without shame from http://www.modular-planet.de/fx/chopper/chopper.html.


Thread: Pour Elysee

EXCELLENT du coup tu pense que c'est possible d'écouter un peu le son qu'il générerait ?


Thread: have_now


Thread: have_now


Thread: have_now


This is my soon too be completed 2x84u modular.  You can see and hear my modular as I've built it and sounds I've made in it's progress, at my youtube channel: Strange UFO Music.  

Naturally, I'd like to expand to a 3rd row someday.  This is plenty capable of keeping me busy for a very long time.

Favorable to sequencer lovers perhaps, has a total of 11 cv sequencers!: 8 - 4 step sequencers, 2 - 16 step sequncers, and a (up to) 1000 step sequencer!  

 


Thread: Micro Mate

Customized Desktop 2x84hp rack to house a MicroBrute.

Remainng 2x20hp would house modules to interact with the MicroBrute.


Thread: PolyKoe

Polyphonic 6U104HP gearlust setup using four AtomoSynth Koe voices.

I know it's a bit arbitrary, using only black-faced modules, but it looks niiiiiiice.

The low price of the Koe modules makes this a reasonably doable project.


nice!


Certainly, when they're 20-odd years old! They buy me the occasional pint of ale as well. If I knew they would someday be buying me modular gear I'd have had more of 'em.


Submit button working again?


Kids can do this?


Nine months in and this is how my EuroModular looks after my Father's Day present of a Medic Modules EKG. Thanks Son!

How about a Eurokorn for Christmas?


This my attempt to emulate A Oberheim SEM 4 Voices Polysynth. I added 4 ADSR to control the VCFs and 4 VCOs to get 2 osc per voice. The fx section is optional but one can dream? I think this could be a very obese sounding synth. If somebody can find a cheaper alternative (all analogue) let me know. 4 more ADSR to control pitch and a Quad quantizer for the slew limiter to do like the glissendo of CS80 


Just built a two tier case out of pine to accomadate new modules.  Building a lot of Hexinverter rhythm modules for now.  Needed more room. 



Thread: UK Euro

Good !!

comme filtre oscillant de belle manière et de plus avec un tracking très correct (avec entrèe 1v/oct), tu as le double filtre  Korgasmatron - http://www.intellijel.com/eurorack-modules/913-2/, j'en ai un, j'aime beaucoup

et l'utilise aussi comme oscillo, de plus il a une ergonomie assez génial. Par ailleurs il sonne bien en tant que multifiltre 12db, beau caractère

j'ai bien hâte de t'entendre sur ces nouveaux instruments

Eryck


Thread: UK Euro

merci pour les commentaires. J'ai plongé mais le plan c'est d'avoir 4 (ou 6) x 84hp d'ici la fin de l'année ;-) J'ai le budget d'une commande alors oui je vai explorer Cwejman... je veux deux autres filtres car je m'en sert souvent comme oscillateurs sinusoide... ça sera un prochain poste ;-)

Une année avec du temps et un peu de budget, ça devrait aller ;-)

Continuez à envoyer des recoommendations, je suis toujours ouvert!

p


Thread: UK Euro

regarde aussi du côté d'intellijel et leur Dixie II, oscillateur simple mais d'un tracking irréprochable et d'une qualité mordante, connu aussi pour la pureté de son sinus

très important tu t'en doute pour moduler...tes AS 95-e par exemple


Thread: UK Euro

en lisant la description du VCO sur ton blog, j'avais l'impression que tu décrivais le DPO de Makenoise...


Thread: UK Euro

Hello PA, 

que voilà une bonne idée, a première vue comme ça, bon je sais que c'est pas fini, il faut des vca. 

On a jamais assez de vca, et pas seulement pour les envellopes mais aussi pour les lfo. Tu semble aussi attaché à AS, qui est super, mais regarde aussi 

du côté de Cwejman, et surtout pour les filtres. Par ailleurs deux filtres pour un système de cette taille me paraît beaucoup (mais pourquoi pas ? )

personnelement je suis plus tendance west coast synthesis avec l'idée des oscillateurs complexes et des waveshaper, mais par ailleurs on peut aussi faire ça avec des modules comme les tiens. 

Bon voilà c'est passionant, mais fait gaffe, c'est cher et addictif (hé hé ). Voilà mon modulaire tel qu'il sera vers Juin prochain (j'y bosse depuis deux ans, mais je suis super content) il est transportable

dans un folding case en ABS (ultra-lèger, si tu veut je te filerai le contact du mec qui les fabrique) - ModularGrid Rack

ah une dernière chose, ne néglige pas l'alimentation, c'est primordiale !!

Best

Eryck Abecassis

 


reorganized for less external gear hooked up. out of the box remains sequencing(orb+ipad) and some noise/drone.


Thread: Two_80

Excellent choice of modules! 

soundart+noise+electronics


This is my current rig - a 9U Goike and a 3U PM Move Case for the bottom row. 


good idea!