An improvised jam going into some acid techno grooves... Enjoy!

Patch Notes:
Make Noise Pressure Points CVs into Acid Rain Switchblade as 8 step Analog Sequencer. Pressure output as macro controllers.
Stages decay envelope modulating Eowave Titan Oscillator into LPG as bassdrum
Erica Pico Drums as weird synth percussion
Stages LFO into Tenderfoot Quad Quantiser into Calsynth Rangoon as plucked string arp
Instruo Ts-l into Serpens Sirius modulated by Rocinante's Gate into LPG as bassline
ADDAC Dual S&H noise into LPG as Snare
ADDAC Transition Controller as macro controller.
Dreadbox Splash as reverb
Mutable Instruments Stages as envelope generator and LFOs
Mutable Instruments Ears as distortion.
Robaux LL8 as gate sequencer
Super Vcas as vca and mixer
Synthrotek MIXIV as mixer
Music Thing Startup as mixer and clock generator.
Takaab LPG as low pass gates.


Hi Jingo,

This is a lovely track. It's peaceful to listen at it and provides a lot of sonic pleasure. Beautifully done!

Thank you very much for sharing this and kind regards, Garfield.

For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads


it's probably not much more difficult than plugging the cable in and a tiny bit if menu diving to get a midi keybooard to cnnect too the hermod etc - I think the manual was decent when I was looking - so that's probably a good place to start

can you post a link to the mixer? what is the full chain you are intending on using?

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


well we often think the same about our colonial brethren - no international shipping is common everywhere

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Hello friends,
I have been searching diligently in the Marketplace since the beginning of this year, and it seems a standard that Europe won't ship out of Europe. Is it just too much trouble?
Us less civilized post-colonies will pay the silly cost! Please, we're desperate! Portland's trying, but we really need you guys...
Does the pain of international shipping vary by country, or is it just all the EU?

ps. I'm now even seeing the UK getting disincluded lol.
pps. Thank you to all the lovely Europeans who will throw us your scraps!


Heyho fellows,

as my time for modular is sparse these days and especially my family needs attention I nevertheless turned some knobs today, the rest was done by the fantastic stochastic inspiration generator :)...

hf
Best,
jingo


Im building my Ambient eurorack setup,have a Squarp Hermod,waiting for a few modules to arrive so havent used it,does anyone here use the Hermod,Especially interested in hearing from People making Eurorack Ambient/Dark Ambient

how easy is it to connect a midi keyboard to the hermod to play the modular?(if thats even possible)

also im getting a Bloodcells audio D.O.M.I.X.X mixer module,can i connect the hermod to this?i want to multitrack record the modular into my daw through the Mixer module.

https://broken-form.bandcamp.com/

Got a Mantis Case for sale,PM Me


..


There is a "message the manufacturer" button. Maybe ask them? In the meantime you could share the current draw here in the comments :)


This unit does not show the drawn current, even if its state is "approved by manufacturer.
Unfortunately the "edit function" on this module is disabled, otherwise I would have changed this mistake already.
I would like someone to advise.
Thank you!


I would say maybe ditch the Pico DSP and get a Disting EX instead of the Disting mk4. The Disting EX rules extremely hard especially in a small rack.


the thing you might want most is a filter - whilst plaits has one built in, it's a good idea to get used to using one and willl give you more flexibility - also I'd get the utilities I mentioned (or similar) earlier rather than later - they'll help you get your head round patching more, especially combined with working your way through the maths illustrated manual a few times

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


IMHO what you've put together is sort of like a collection of desktop synths in one rack, which is cool but I think won't really let you enjoy everything modular has to offer. I put something together that tries to hit the same key points but that's also got a bit more flexibility and modulation capabilities.

ModularGrid Rack

Here's what I changed:
1) Swapped the Behringer oscillators with a Dixie II+. In a rack this size I'm not sure you can really fit 3 voices easily and the Dixie is a great single voice with integrated sub out and a lot of features. Shrinking this down lets us fit in a
2) Maths instead of the Dual Micro ADSR. One of my favorite modules and lets you do a ton, the illustrated manual covers like 30+ different patches that all do something cool and help you understand the full potential of a modular system
3) Removed the Wasp as similar to #1 I don't think you have room for 2 filters
4) Shrunk Plaits into a Beehive to make some more space
5) Fit in a Cold Mac to open up a bunch of logic and modulation capabilities and to find interesting ways to tie different elements together via its various output CVs, all coordinated by its main big old knob.

Assuming the general plan laid out here resonates, there's a variety of different paths you could take (Rampage over Maths, Miso over Cold Mac, STO over Dixie II+) so don't necessarily grab these exact modules, but give some thought to whether this might be a more open ended instrument that you could learn from while also making cool tunes.


ModularGrid Rack

Hello everyone,

as the titles says, I am new in the modular world, and after reading the forum for a while, watching hours of reviews in Youtube, etc...I can say I am still a little bit lost, but anyway I tried to create what for me would be a small modular Groove box (if that exists...) on a budget. Currently I own a Dreadbox Typhoon, an Elektron Cycles, few Volcas and a Keystep as main controller.

I would like to know if what I created makes any sense to you, and if not, what should be changed (I am aware that in a small rack like this one, the options for modulation are quite reduced, with two VCOs and couple of drums):

A: the tonal part

  1. Case: The Nifty case, which seems fine having already a Keystep to send midi. About the size, I know the bigger the better, but for now and considering the available space I have in my desk, is enough.

  2. VCO: The dual VCO 112 from Behr, I know the first batch had some issues with tuning, but it seems it has been fixed already. For the price, it is a no brainer for me. I was checking also Dreadbox chromatic VCO but few people were complaining about the sound and tuning.

  3. Filters: The Forbidden Planet , as recommended in many posts and at good price; and to have some extra filter options, the Doepfer Wasp Filter.

  4. VCA: Doepfer Quad VCA, also as a Mixer.

  5. ADSR: Doepfer dual ADSR.

  6. Sequencer: although having already an external sequencer via midi (Elektron Cycles and Keystep), I want to include a sequencer in the rack, to have an standalone unit. After some readings and always considering the budget, I opt for the Variagate 4, to sequence both VCO´s.

B: the drum part.

  1. Plaits, for its versatility in sounds, a swiss knife.
  2. Pico Drums, with two independent voices.
  3. DOT, to sequence Plaits and Pico Drums.

so, makes any sense?

Thanks for your time!!!!


Hi Jim!

Thanks for taking the time for some helpful input!

Will likely go with the Mantis now as eventually I’d like to get a Rene in there (which would never fit in the smaller Nifty one). That FX Aid XL looks like a winner too!

Will likely pull the trigger on making this a reality soon and am gonna start with:

  • Mantis 104hp x 2 case
  • Beatstep Pro (already have it)
  • Plaits
  • Veils
  • Maths

And add the rest from there bit by bit.

With the above mentioned modules will I need anything else to get started or would that be enough function wise?

Thanks again and have a good one!


Might be easy to get a Metropolis right now at a discount too, and while it's limited in some ways it also does a lot and can be put to generative purposes.


if you want more control you might to look at things like metropolis/metropolix or the ryk m-185 or the tesseract step fader - the latter will use your pre-existing quantizer and is cheaper, but also lacks memory

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


hahaha typo - I meant beads!

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Hi and welcome

if you have a BSP for sequencing I would not start with the nifty or any other case that has any built in midi-cv conversion - you do not need it

I would get either the mantis (if you can find one) or the doepfer lc9 instead - these are better value for money

I think the module choice (especially with the BSP) is a good start I would swap out the disting for the newer version and the pico dsp for a fx aid xl (similar but more varied and with better ergonomics and more modulation inputs)

you could consider dropping batumi and possibly Pams even, at least, to start with - you have enough with the Maths I think to start

I'd go for veils over the intellijel quad vca, but that's mostly taste

I'd add mutable instruments links and kinks and something like shades (there are a lot of similar modules) as they are incredibly helpful in patching and to grab a few stackcables or headphone splitters to use as passive mults

if you are not going to fill the case in 1 go I would recommend using blind panels (cereal box card is fine) to stop unwanted metal objects (loose dangling cables for instance) shorting out the power etc

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


ModularGrid Rack

Hello! I’m a small town Canadian newbie with a love for sound who is looking to make the leap to modular. I have a few hardware synths (Microfreak, AFX Station) and a few Volcas (FM, Modular, Keys and Drum) but am just about ready to step away from that (and Ableton and iPad apps) and make the modular leap.

Am looking to fill an 84hp NiftyCase (that has MIDI to CV and audio out built in apparently) to make my first rack with about a $2,250 budget. (Already have a Beatstep pro to sequence)

If anyone could take a look at this and give some pointers or make any changes/suggestions that would be extremely appreciated.

Am aiming to make a solid, all-in-one starter system using Plaits as the primary OSC.

Thanks in advance and have a great day!


With more than one sequencer you will have new needs:
Means to combine 1VO CV like a precision adder/offset/octave switch as well as means to combine trigger streams like a logical OR. Also you will want a logic module and possibly a switch to derive new trigger patterns.


if you are convinced you need beaks, morphagene and clouds - I would get another row for modulation and utilities
-- JimHowell1970

I take it that the beaks are extras needed for the Crow...?


Thread: Latest Racks

Having lots of fun with this setup. I just thought i would share.

https://www.modulargrid.net/e/racks/command_center/193629

Modules that are a lot of fun:
Polygogo ER-M
Nerdseq
Five12 Vector
Percussa SSP
ER-301
rack1
rack2
rack3
rack4


It sound nice sometimes.


Yeah the MegaSlope combined with the Rampage and its EoC an EoS is really fun. I'm looking at an A-155 or A-157 to get some more control over things. I've got a turing machine and expander enroute.


I've been trying to go through all the recent posts in this forum and I'm sorry I didn't get to this one sooner. There are so many things I love about this video. I had to go watch a whole bunch more on YouTube. Love the music, love the commentary, love the scenery, and I really miss going fishing. Thanks for posting.


Buy one, speculatively.
After completing that long and thorough decision process
still turn it around with minimal loss, if need be.

Alternatively, get a FranKinksTides and a 4ch mixing attenuverter and possibly save a bit.
(2cts)

-- wiggler55550

Thanks for the suggestions. I'm not too keen on the MI stuff. I'm never too sure what I'm looking at with those...
At the moment what I keep running out of is LFOs and I'm in the market for a quad with as much CV control as possible. Currently torn between the Batumi and the Malekko Quad LFO. Same thing, yet so different.
Definitely need an attenuverter. I have a whooping zero.


... aaand it's gone.


hehehe

Enjoy your spare HP, don't rush to fill every last space, this is not like filling sticker books. Resist the urge to 'complete' your rack, its never complete so just relax.

https://youtube.com/@wishbonebrewery


Since my last post here I had great interactions with @0110110, @filipl and I also got another module from @dork173.
Thanks guys.


Just to notify that the Maths is now available for purchase new at Thomann, at €319.
I'm considering one myself, but given my decision-making speed, it'll probably be out of stock again by the time I do decide.
-- Mazz

Buy one, speculatively.
After completing that long and thorough decision process
still turn it around with minimal loss, if need be.

Alternatively, get a FranKinksTides and a 4ch mixing attenuverter and possibly save a bit.
(2cts)


You already got a sequencer right there. Send some conveniently spaced trigger and gates to MegaSlope, have those slopes quantized in your ADDAC207 and send its output to your sound source's 1V/O.


Hi,

I'm new to the forum. I thought I'd post my current rack and see if I could receive some wisdom from vast pool of experience here.
I've been noodling with eurorack for about a year and after jumping in with the awesome ALM system coupe I've taught myself to solder, and built my own case. At present I've got a solid frame to build on but no sequencer to pull it together.

Can anyone out there off some direction?


Just to notify that the Maths is now available for purchase new at Thomann, at €319.
I'm considering one myself, but given my decision-making speed, it'll probably be out of stock again by the time I do decide.


Ukugene ;-)
-- wishbonebrewery

Isn't that J-M Jarre's new techno-Hawaiian project...?


Hi TumeniKnobs,

Lots of fun indeed in this track! :-) It's nice to read the details how you came to this, very interesting.

Thank you very much for sharing this and kind regards, Garfield.

For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads


triplatt or shades or similar - but definitely links and kinks

adding veils too is a great idea

Data I've always kind of wanted one since they came out but they have never been in stock anywhere - I saw one in stock last night at a online store and I decided not to buy it - I'd rather spend the money (and rack space) on other things - I have a DC coupled interface so I can use vcvrack if I want to as an oscilloscope - and if I bought an oscilloscpe I would want to be able to see video rate wave forms and I'm not sure that Data can do that

sequencers - do you want a v/oct sequencer, a gate/trigger sequencer or both (separately or in a single module)? euclidean usually refers to trigger/gate sequencing
PNW is not so menu divey it's annoying if you can see the screen and does both euclidean and random quantized loops for v/oct
if you want more control over the tune you might want to look at Rene - but it is significantly more complex - other possibilities to look at might be klee (a very long shot - as I've never seen one for sale only DIY and not often then) and the frap tools usta (but note it is very expensive)

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Please delete duplicate module's pages


The goal with this recording was to start dabbling in and begin to understand how I might use samples. I see a ton of videos using the Morphagene and you can definitely get some cool sounds out of that thing. A shout-out to aphew_goodman and his "meint ihr nicht / wir könnten / aber" track - that was also an inspiration here.

A few days ago I made a simple patch with the Piston Honda and Bionic Lester that quickly went to a dark ambient sounding thing. Loved it. Then I happened across a great bit of dialog in a Star Trek Voyager episode, "The Thaw", and I thought it might be perfect to try as an experiment.

I don't have a Morphagene, but I do have Pigments, and since the new v3 just dropped I had it running and gave it a go. I immediately loved what you can do in Pigments with samples. Spent a few hours tweaking, then I set up an arpeggio and let it run the samples. I dialed up the modular for the low end and some weirdness (thanks to the Bionic Lester's comb filter), added a self generating patch from the Hydrasynth for low-mids, a simple arp on the Pro3 for some hi-mids, and finally a snappy little wood-blocky kinda arpeggio thing on the Sub37.

This is essentially a live, mostly-improvised performance recording. It took about a two hours to get all the synths making acceptable noises, then I turned down all the volumes, hit record and brought in different bits in stages. There was some tweaking knobs on the synths and a lot of manipulating settings in Pigments as it played out. I did add a handful of additional sample triggers to fill in what I thought were gaps with the dialog parts.

The dialog is:
"Fear is the most primitive, the most primordial of biological responses"
"All we have to do now is decide how to negotiate with... an emotion... with a manifestation"
"When fear holds you hostage... how do you make it let go?"

Modules used:
Piston Honda, Bionic Lester, Mimeophon, Ochd, Pamela's NW, Quadrax, Quad VCA

Cheers!


Fiddling with the Resonance and VCF EG AMT on the subharmonicon (i.e. turning them up high) will create bird noises


Pass through a reverb pedal with shimmer on
Subharmonicon acts as backing pads.
M32 has a harmonic minor sequence.
DFAM just adds a soft swooshing rhythm


is this a 'dream' rack - I'm not sure I'd want to play with it too much though
not enough modulation or utilities and 3 modules that are similar and large - probably better too get oone and see if you desperately need the others
if you are convinced you need beaks, morphagene and clouds - I would get another row for modulation and utilities

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Hi Troux,

Thank you :-) I can recommend the STO without any hesitation, it's really worth it in my opinion. So go for it :-)

Kind regards, Garfield.

For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads


From what I see a good place to start as I said above would be adding kinks, links and triplatt (these modules are somewhat easier for me to source right now) and just go from there. I think once I will receive my case and start putting it all together I will realise if I will be needing anything else.

About mordax data... I have seen it in pretty much every youtube video that talks about modular are there any other oscilloscopes worth checking out? I guess its more of a learning tool rather than a necesity but I can see the benefit in connecting what you can hear and actually seeing it on a screen

Can you guys recommend me a sequencer (euqlidean perhaps) that is not overly complex or menu divey but is different from classic hardware sequencers?

PS i will look into veils since from what I gather 4 vcas isnt enough for a rack this size


yeah I find I loose things like that though - would much rather have modules

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


True, true. I did see a cool video which showed how to make various passive things you can just stick in cables, attenuators being the most useful one.


but a lot more expensive and power draining

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


@JimHowell1970 - you're not wrong, but attenuverters are a better use of the hp!


Thank you, friend! Haha, yes we recorded two pieces with the Ensemble Modern (in one of them appears also Sarah Maria Sun, the singer from the video)! Very nice that you also like "that" side. I really appreciate your listening, thank you!

www.coderapuzo.com
IG: puzo.puzo.puzo


Wow! That's hardcore. The first thing I had to listen to after this was Zappa's The Yellow Shark - particularly The Girl In The Magnesium Dress. Now I'm listening to some John Zorn. You are keeping good company. :-) I have a huge appreciation for the effort involved in realizing this kind of composition. You all did a super amazing job capturing this piece live. Can't be easy.

Edit: Double wow! I was just checking out some of your other pieces on YouTube and I see my instincts were right on with The Yellow Shark. Very cool Ensemble Modern connection. And while I was there I had to watch Plétora again. That performance is epic!