Some words on the module arrangements.
- Upper part is mainly audio path, lower part mainly modulation and gate processing
- Attention has gone into getting the best reach to all buttons and switches, by doing the following:
- Observe the upper part modules have been selected as much as possible to have the buttons above (jacks below), so no wires get in front of them
- Small modules have small knobs, which make them difficult to handle. So those small modules are positioned at the full left or full right side
- Jacks are as much as possible concentrated together, to provide more space around knobs.
- At three places additional 2hp plates are installed, each with 6 additional switches or jacks to expand the possibilities of their adjacent modules. They were originally blind plates or passive multiples, and now enable the following
- Gemini 2412: filters can go into resonance or not
- A-135-2 : additional normalling paths added
- A-141-2 and Ladik C-211 : additional options added
- Disting EX: additional Midi In/Out via 2 mini-jacks
- Clock Divider and Batumi: additional options added