It now mentions the A-131 Exponential VCA on the right hand side. Is that expected?

Thank you! Everything is working fine now.

A new track with this system - Two Notes In Parallel

Universe Selector in the Navigation Bar

Switch to an other modular universe from everywhere with the new Universe Selector

Marketplace

The ModularGrid Marketplace is an area where private persons can trade their modules. The Marketplace is also tightly integrated in ModularGrids search engine and lets you run complex searches on offers via the Module Browser. A convenient notify function alerts you if someone offers a module you desire.

also,a way to put up images unless you can already do that
-- MarsFace

No image uploads, but you should be able to embed images and videos via the markdown syntax.

-- modulargrid

ok thanks,was going to link a fly by vid of modules I've put up for sale.
(BSOD says my hard drives on the way out so don't want to mess with individual pic at the moment in case laptop goes down)

A feedback system will come. I am thinking about verification, too, but that is hard to layout.
I won't limit the usage to Unicorns, because everyone should be able to test the Marketplace.
People actually have to put stuff on it to make it interesting.

At the moment I tried to make it as easy and flexible as possible, so many things are missing or feeling not quite polished.
If the Marketplace will be used in the future for sure there will be a lot of upgrades and some Unicorn enhancements too.

also,a way to put up images unless you can already do that
-- MarsFace

No image uploads, but you should be able to embed images and videos via the markdown syntax.

When clicking on the module's picture from the following page, an older version of the module's image is used.

https://www.modulargrid.net/e/other-unknown-ishizeno-one

That is probably a cache issue on your browser. Looks good here.

Also, what should be the process for adding a new module maker? ISHIZENO sounds a lot better than "other-unknown".

Added Ishizeno as manufacturer. Welcome to ModularGrid!

Thanks in advance for your help!
-- ishizeno

When clicking on the module's picture from the following page, an older version of the module's image is used.

https://www.modulargrid.net/e/other-unknown-ishizeno-one

Also, what should be the process for adding a new module maker? ISHIZENO sounds a lot better than "other-unknown".

Thanks in advance for your help!

Still need Clouds and a few blank panels...

Great suggestions! Thank you!

my suggestions are :

4>FH-1 Expert Sleepers
5>EURO Brute Numerical MiniBrute Expander
6>Intellijel Audio Interface II and or μJack/uJack

if your interest is musical compositions as opposed to sound design i would replace most of what you have with
a complete synth like Anushri Mutable instruments
you will save allot of money in the end.

and a must have in any system is MATHS or FUNCTION
cheers

Those are good points Exper, I have been thinking of trading a wavefolder for a ring mod... But I am not sure what to sacrifice for the quadra expander... I am not sure what the qadra with expander will do that the dual adsr wont... So I am a bit confused about that aspect. I guess one quadra plus expander might be the way to go.

Hi All,
This is my first try at Eurorack design. I could use some comments/suggestions from more experienced people. Here are my primary needs/desires:
1. I am interested in creating musical compositions as opposed to sound design although the latter would be fun
2. I want to have pretty advanced sequencer capability, hence the Intellijel Metropolis, but am open to suggestions
3. Other than the sequencer I want to keep it pretty simple and straight-forward.
4. I have a little M-Audio Oxygen25 controller that I would like to use with the system. It only has USB.
5. I also have a MicroBrute that I think could be used as a controller but not sure what to plug it into.
6. I want audio outs to plug into my audio interface as well as a headphone jack.
Thanks in advance for your help!

We already have: http://www.modulargrid.net/e/other-unknown-e350-morphing-terrarium-expander
Any reason why we need this addition? Is this new panel available commercially?
If not, this is a duplicate.

Cheers

The design was simplified in order to reduce the number of analog crosspoint switches, hence the projected retail price. I've also decided to adopt the Arduino shield standard for the breakbout boards, while using a dedicated Arduino Uno for every polyphonic channel. Without the iPod Touch and with switches for only two channels, the 8-channel module might retail for less than $1,000, which would be pretty cool... Last but not least, I've added a mockup of the backplane on the module's page.

Hello SpaceCloudsFilter. This module was never sold as a kit. Are you sure this is the correct module you are looking for?

great idea nice to see this happen
i would become a unicorn member for better selling/buying purposes
i agree a feedback score and verification of some kind of who you are and who your selling to
also,a way to put up images unless you can already do that
but all in all you done a good thing here

EDITED Jan 29th 2015, 04:27

Hi! I just bought this module a few hours ago. I was my first eurorack module, so I don't know very much about it .. I buy a kit ,
I have the atomosynth koe :http://www.atomosynth.com/koe%20desktop.html and this sequencer. I don't know why but the sequencer was working and now he's stock on 1 even if I turned all the 16 switches ON. Can you help me? I think my connection are not right. Thanks a lot!

O

Hi everyone!

As I'm about to enter the modular world I'd like some serious feedback on a rack I believe should fit my needs, but since I only used non-modular synths and digital ones I'd really like some input here.

I need this to be an all in one stand alone sound design workspace. Mostly for non musical purposes.
It has to be extremely flexible and with a lot of modulation at disposal (thats the reason for the 2 Maths). I don't feel the need for a sequencer and if I really will need one I'll use the Midi in. And yes I'm a delay lover.

Please feel free to suggest any change or point out inconsistencies!

EDITED Jan 28th 2015, 22:10

if people posted a video or photo of their actual rack it would weed out the FANTASY racks from the real ones

i would like to buy or sell with unicorn members only :)!

regular ModularGrid membership should include some sort of social media link
because they are still pretty anonymous :(

also could you include a "sale feedback" so i know how past transactions went with that user

EDITED Jan 28th 2015, 18:01

Fantastic!

Might be worth considering adding some additional "verifications" and a "feedback" loop but this is a great start.

Verifications could range from Paypal xfer to connecting a 3rd party account like MW to creating a way more complex verified ID (eek: https://www.airbnb.com/help/article/450)

Feedback could range from a simple rating, score, comments, to reporting a buyer/seller. Thanks for working on this, the notification feature is gonna be handy. Hope it can be kept simple and people honest. :)

EDITED Jan 28th 2015, 16:35

when techies build modules.

Sure. I have absolutely no problems if you show a MG rack in your video.

yes 4 channels would be good - that is what i thought when i first looked at the unit

thanks for clearing up the the breakout boards :) i was thinking this would take up a row (84hp)

as for the internal or external screen ?
isn't the ipod connected via lightning jack ?
or is it integrated in into the unit ?

-- FSK1138

The iPod will be integrated from the inside but should be easily removable. We will make sure that you can plug it from one of the faceplate's USB boards as well. But from a user interface standpoint, having it inside will be nicer, because the graphical user interface can be aligned with the channel's knobs.

buying and selling to members

-- FSK1138

We now have a marketplace with a nice search function and a notification feature!

Hello, It's me again.

I want to make a video, and I would like to use in it the rack that I have put together here. Do you grant me permission to do so? I would leave the ModularGrid logo at the bottom of the rack and clearly mention in the video that the racks were composed together at this website. A positive answer from you could lead more people to use your site and perhaps more inclined to take a Unicorn Account. What do you say?

Awesome! Looking forward to using it.

What is it?

The ModularGrid Marketplace is an area where private persons can trade their modules. The Marketplace is also tightly integrated in ModularGrids search engine and lets you run complex searches on offers via the Module Browser. A convenient notify function alerts you if someone offers a module you desire.

Unique Features

• The Marketplace is integrated in ModularGrids search engine. Not only can you search for a modules name, you can also do a more abstract search for a 8HP oscillator in Europe.
• You don't have to scan the database everyday when you are interested in a certain module. A convenient notify function informs you when someone offers a module you fancy.
• It's free.

How does it work?

Find

• Search for modules you are interested in on the Marketplace page. Filter by region.
• You can also use the Module Browser to do a more detailed search. E.G. search for an 8HP Oscillator in Australia. Enable the Available in Marketplace drop down in the advanced search options to do that.
• All offers are also displayed on the corresponding Module Detail Pages.

Notify

On the Module Detail Pages you can make use of the Notify function for a specific module. You will get an email if someone offers a module you are interested in.
You can set your country in the user settings, so you only will get offers in your continent.

Buy

• Visit the Offer Detail Page to read more about the module.
• If you like it, contact the seller via the Contact seller button.
• From here on it's on your behalf to discuss payment options, shipping and the like. ModularGrid does not cover that.

Sell

• Visit the Module Detail Page of a module you'd like to sell.
• Click Offer on Marktplace and fill out the form.
• After you sold the module please mark it as sold on the Offer Detail Page or on your User Profile page.
• You can always delete an offer, if you have changed your mind.

Good Traders on the Marketplace

If you did a successful trade add your business partner to the Good Traders on the Marketplace thread.
That will build up trust and reputation over time.

Prerequisites

• To be able to list your modules on the Marketplace you need a regular ModularGrid membership. Anonymous accounts do not work.
• You have to be a member since at least 3 months.
• You can offer a maximum of 10 modules at a time

EDITED Mar 15th 2019, 18:07

yes 4 channels would be good - that is what i thought when i first looked at the unit

thanks for clearing up the the breakout boards :) i was thinking this would take up a row (84hp)

as for the internal or external screen ?
isn't the ipod connected via lightning jack ?
or is it integrated in into the unit ?

The module images on ModularGrid are uploaded by users, so their rights are not cleared by manufacturers.
Since it is a great and free way of advertising manufacturers typically do not complain. But dependent of the context of your video if you want to be sure it may be good to ask them.

We will start with an 8-channel model, but a future model could offer 4 channels only. Having an external screen would make the design a lot more complex. The beauty of using an iPod Touch is that it gives you not only a fantastic screen, but also a multi-touch interface, a powerful CPU, 512MB of RAM, 16GB of flash, a camera, a WiFi interface, a great operating system with a huge developer community, and many other goodies, for just $199. It's pretty hard to beat...

The unit is 42HP. We do not know yet if we will manage to cram all components onto a single backplane, but we're pretty hopeful that we will. If so, it should be pretty shallow, allowing you to stack multiple breakout boards on top of each others. When doing so, stacked boards will share their pin sets. And to be clear, all breakout boards are connected onto the module's backplane, therefore do not increase the amount of horizontal space you need to dedicate within your rack. 42HP is all you need for the submodular synthesizer and 8 1S breakout boards.

EDITED Jan 28th 2015, 07:19

looks great !! . abit of a monster .. perhaps a smaller unit with external screen .?
..also you mentions breakout boards ?
Analog Filter
Digital Signal Processor
Envelope Generator
Low Frequency Oscillator
Mixer
Oscillator
Phase Shifter
Sampler
Sequencer
Waveshaper
??
how big is this unit with all expanders ?

I would love some feedback on this submodular synthesizer concept.

I wish I could make a video with the racks I made. Do I have to ask permission to someone? To the manufacturers of all these modules? Are these original pictures from the manufacturers copyrighted? Or is it free to use?

EDITED Jan 28th 2015, 01:52

Beautiful setup. I'm a big Intellijel user myself. A few suggestions to help more with the generative aspects.

Don't miss out on the Quadra expander. It allows chained events, trigger delays, etc. Also, Be sure to use the Shapeshifter in LFO mode. Imagine all of that cross FM, wavetable morphing goodness as sometime chaotic, sometimes patterned CVs. Amazing. Next, look at the uMod 2, as it is not only a beautifully clean ring mod, but its a CV funhouse when you combine different speed modulation, LFOs, etc.

So I am building this thing for quasy self generative musical polyphony among other things.

Modules and case are in the mail (some are on back order I think, but they will come).

I desided to go all intellijel becouse they are quality and the range of modules realy fit with my way of thinking.

Top Right corner is 4 voice poly. 4x Dixie II, 4x uVCF, 2x uVCA.
These can all be used for other functions but can function as a 4x poly.

In the case there are 4 adsr envelopes and 8 ad envelopes (all can funtion as lfo also).

There is also a Rubicon osc for solo voiceing, Dr Octature 8 pole filter/lfo, Shapeshifter digital osc, Kogasmatron filter with expander making it sort of four filters. Also there are more VCAs and mixers.

People are saying that for the price og such a thing you can get a poly synth, sure this is true. But with this settup there are enormus possibilitys not possible with most poly synths.
Think how many sine generators are in the box for instance? I count 14.
Additive synthesis anyone?

How many band pass filters? I count a few.

How many fm modulation possibilitys.

So not only is poly possible but a huge variation of other things.

To make things even crazyer there is the sequensing section. The combination of 2x uScale and 2x uStep plus Metropolis will make quasy self generative poliphony/polyrithm possible. This combined with the planar for texture changes gives nice possibilitys.

Can you recommend a low price mixer?

The Pittsburghs and Doepfers are o.k.

Can a mixer perform the same role as the Pittsburgh Outs?

Euroracks have a very hot output, but with a mixer or an attenuator or vca you can bring the levels down.
An output module like the Pittsburgh Outs is an attenuator and just adds an adapter to the bigger 6.3 mm jacks, additional headphone outputs and normalizes mono signals to stereo.
As said, it is nice to have but not mandatory.

Haha – exactly. The Brazilian drum bits aren't really necessary...

Exactly – I'd like to build a basic 2VCO synth to start with, so your suggestions sound good.

Can you recommend a low price mixer?

Can a mixer perform the same role as the Pittsburgh Outs?

Many thanks for your help!

Rack looks not very balanced.
Two Maraca, a clap and one cowbell, you will definitely rule the brazilian electro scene with that :)
How do you trigger these without a drum sequencer?
Think about what you want to achieve. If you don't have a clue yet I recommend to focus on adding some missing basic building blocks, that would be:

• Envelope
• VCA
• Mixer

Additionally a Clock Source and a Quantizer, MIDI if you need that.
Pittsburgh Outs is more a convenience module, not too necessary.

EDITED Feb 20th 2015, 00:28

Erbe-Verb Take 1 - amazing module!
Mutable Instruments Braids & Noise Engineering Basimilus Iteritas are running thru the Erbe-Verb, being modulated by alot of things.
Kick is Hex Inverter Mutant Bass Drum (dry)

Hi all!
I'm new to this stuff.
Was wondering if patching something this way (splitting and then combining through mixers) would cause some sort of feedback loop?
Also, does anyone know if there would be a more elegant way to perform this patch?
Thanks!

some features that might push me to unicorn :

1U rows !!!
cost of case
cost of power supplies
cost of rails
buying and selling to members

-- FSK1138

At least one of those features will come very soon...

some features that might push me to unicorn :

1U rows !!!
cost of case
cost of power supplies
cost of rails
buying and selling to members

While everyone is going crazy about Namm, ModularGrid created the worlds advanced modular synth poster :)
The poster contains over 870 of the most popular eurorack modules you guys put in your racks.
Not sure what kind of a power supply one would need to drive this $200.000 whale.

If someone needs a gift for themselves or a geeky friend, it's available at Zazzle.

Some more photos: https://www.flickr.com/photos/instantknut/sets/72157650461827742/

Already in the database, please delete:
https://www.modulargrid.net/e/grayscale-barton-vca-mixer-grayscale-panel

That will not come very soon but there is a nice workaround already:
you can open two racks in different browser windows and you can copy and paste modules between the browser windows with c, x and v keyboard shortcuts.> >

Cool; thanks!

Would also like to see an Excel-compatible spreadsheet of the modules generated from the program.

A CSV export might be possible, I will look into this ...

Thank you for the consideration!

I would like to see the ability to have multiple racks on the same page. For example, have number of racks and then it splits and has rack one, rack two, etc. It would be nice to be able to layout a large multi-rack system on a single page.

That will not come very soon but there is a nice workaround already:
you can open two racks in different browser windows and you can copy and paste modules between the browser windows with c, x and v keyboard shortcuts.

Would also like to see an Excel-compatible spreadsheet of the modules generated from the program.

A CSV export might be possible, I will look into this ...

-- IvanC