All Posts

Hi, thanks!!!

Thanks @WhatGives great seller! Very easy going, got it shipped out quick, and the item was as described.

Wildcode Desert Sidebar:
( 40 )
* DLD
* Loquelic
* Links
* White Whale
( 40 )
* Batumi
* Belgrad
* Veils
* LXD
( 24 )
* Mangrove
* Peaks
* Earthsea

Buy: ;; 26hp
* Plaits
* Stages
* Maybe an Ansible later to replace White Whale.

Sell: (+ 8 38 10 14 18 14 14 14 6 12 18 40 34 14 6) ;; 200-260
(60 hp)
Chimera
Telharmonic
Akemie's

Samara
Chance
Frames
Tides
SVVCF
Meadowphysics
Streams
Rubicon
Atlantis
Metropolis
O&C
Flux

Voltage Block (return to aaron)

Many thanks to @mqldng who sent me a top quality MTM Radio Music, and to @LiquidYzer for his beautifully made nRings. Both items were very well packed, sent quickly and in mint condition!

EDITED May 22nd 2018, 11:11

Thanks @Drazen for the Sub6 mixer. Arrived quickly, and "like new" as described!
-- SpaceCowboy

Unfortunately this guy @Drazen uses unacceptable selling practices.

The case: On all of his offers on marketplace (and there are many of them) he's marked his region as EU.
Having proceed transaction with him, buying a used Make Noise “Rene” for 360€ (shipping incl.),
i was very unpleasantly surprised when realised that according to DHL shipment tracking information
he provided, the true location dispatch was actually from DOHA / QATAR !!

This means that (under the relevant laws of Greece, where I am based) now have to pay an extra fee of 70€
for customs clearance, plus an additional fee of about 50€-100€ (depending on weight, kind, etc.) for “used
electronics" tax, even if the package marked as "gift".

During this misleading info tactic @Drazen obviously applies in order to find a broader list of potential
buyers, than on his true non EU region area, now i should pay no less than about 480€ for a used item while
on my local store (synthesizer.gr) a brand new "Rene" costs 499€!

This is outrageous!

Even though cannot call this strait as a Fraud (as the extra money won't go in "Drazen’s" pocket), however it is
an extremely faulty practice and definitely a real Fraud in terms of buyers wallet.

EU residents Beware of your transactions with "Drazen Saric" :(

CAVEAT EMPTOR!

I recently bought an Erica Synths Midi-CV V2.
The notes are coming through fine but when I play on the keyboard the notes are reversed.
For example, when I play C1 then C2 it sounds like C1 then C0.

Anyone have an idea of a possible fix?
Is it a possibility that the module has been wired incorrectly?

Fantastic, thanks for the great tips!

Can't wait to give it a look.

Definitely both...if you're using the Maths as an envelope-like modulator, having the LFO on hand for more traditional LFO-ish behavior is a plus.

https://cdn.modulargrid.net/img/racks/modulargrid_670547.jpg

Wondering if these three will play nicely? Seems like the visual cortex is a good starting point, but i wanted to add see modules on here. What do you think?

Looking for some advice! I'm looking at the visual cortex as a good starting point, and am wondering if the two brownshoesonly modules will be good additions here, allowing patches between all three of the modules shown.

Thanks! Any recommendations would be awesome!

Hello everyone.

I am new to modular and would like to know, if my first sketch would be a good idea to start with. What do i want to do with this? Well, i want something for clicky, percussive and FMish sounds. My budget is around 1000 Eur.

Thanks for your opinion.

https://cdn.modulargrid.net/img/racks/modulargrid_669959.jpg

EDITED May 21st 2018, 12:53

Hey Lugia,

Thank you very much for the advice, much appreciated!

I hear you regarding the AJH module but I'll probably just keep it and add it to the next skiff I just purchased.
I'll take your advice on the LFO and add that to the first skiff in place of the ADSR.
Doesn't the Make Noise Maths act as a good LFO, or do you recommend having both modules in the same setup?

Thanks again!

EDITED May 20th 2018, 21:05

Ojj

This has worked out well!
If the button (double-click) is assigned to the CV quantizer, it'll step through none, chromatic, major scale, minor7 scale. If there's no CV input, the scales can be played with the knob. The maj & min scales use the CV knobs position at start of record as an offset for the scale (tranposition) so it can be easily played in any key right away!
If a CV input is applied, then the Knob acts as a smooth offset for the CV so can tune any VCO/key offset. I find it easiest to patch in a dead signal, tune the knob, then patch over to the CV source and it all quantizes perfectly

Thanks again for your insight! It made the RIT_M a winner ;)

I'm interested in basically exactly what it going on here in Legowelt's studio tour

. 59:30

He introduces a small, contained doepfer system that generates organic drones and soundscapes.

I really really like this style of synth, and I want to sort of condense in further maybe into two rows?

How can I start?

This what I have so far, definitely liking analog VCOs, LFOs, spring reverb and the fun filters he was talking about during the talk

https://cdn.modulargrid.net/img/racks/modulargrid_669049.jpg

Added possible third row dedicated to Drums! How does this look? Thanks

Wow...that is one seriously expensive ADSR. That's actually where I'd start: get rid of it. Instead (and keeping with the preponderance of Erica stuff here), replace it with Erica's Black Dual EG/LFO. It's cheaper, for starters (so you can sell the AJH cheaply and still afford this module), and doubles up on its functions. And you do want that...having separate envelopes for filter and amplitude is actually pretty useful, hence why Bob put both in the Minimoog.

Mixer? Sure, why not? It's kind of in the wrong position, though; instead, swap it and the quad VCA so that you can control the oscillator mix with the VCAs, then the Stereo Mixer can work with some sidechaining-type patchwork (you need stackable cables for this, fyi) to send the filter to both the mixer and the Pico DSP, then return the DSP back to a stereo pair on the mixer in sort of a cobbled-up AUX send/return fashion. Also, if/when this gets expanded, you'll want that mixer to add in the signal from whatever expansion skiff you put together, so it's a good plan for the future to have that.

Sold MI Edges to @DerLatakia - very fast payment, nice communication. Thanks!

Hi everyone,

I am totally new to eurorack systems and building a 104hp rack.
Just looking for advice on the setup I intend to build.
Do I really need a mixer in this setup, as I have a VCA?
Would this be an effective setup?
How could it be improved?

Modules I have so far are:
Erica Synths Midi to CV, Wavetable VCO, Quad VCA, Pico DSP, Pico Output.
JH Audio DH-ADSR.
The others I have yet to purchase.

Thank you!

Well, it seems to lack some complex random-type functions, so 18 of those 20 hp maybe oughta be a Marbles, especially if you're out on the experimental end of the spectrum. Ultra Random is...OK, but Mutable's new take on random is just plain nuts!

My rack:

(The image isn't updating, click on it to see full rack)

What would you fill the remaining 20hp with? I was going to put a SSF Ultra Random and a monome walk + ansible. But now I'm thinking maybe ad something else... Love to hear ideas!

Making mostly experimental / ambient stuff... http://sleeplesswaves.bandcamp.com/

Cheers!

EDITED May 17th 2018, 23:48

Great seller @PinPinKula

Easy communication and very fast delivery! Solid build gear!

No public name calling, please. I have sent you a message.

this person wont leave me alone. called me a 'cunt' because i wouldnt respond to his harassment. how else am i to report this?

Hi guys, again available now via www.milkaudiostore.com !!!

Since today, all my previous racks are just showing empty cases.

They look ok in command center, but when i choose 1 for viewing/editing,
the racks does not show any modules anymore and i cant edit them. (data sheet is still there)
The top buttons-row for editing just don´t work, except for command center.

Any ideas whats wrong here?

Add: just tested, via mobile seems to work, but via PC won´t.

-- anticitizen1

Your data is still there.
Maybe you have Javascript disabled on your PC? Or some extension that blocks Javascript?
Which browser are you using? Try another browser to check.

Since today, all my previous racks are just showing empty cases.

They look ok in command center, but when i choose 1 for viewing/editing,
the racks does not show any modules anymore and i cant edit them. (data sheet is still there)
The top buttons-row for editing just don´t work, except for command center.

Any ideas whats wrong here?

Add: just tested, via mobile seems to work, but via PC won´t.

EDITED May 16th 2018, 09:58

I bought an OC from @Virgil. Very nice guy.
All was perfect. Quick response.
Highly recommended too.

I'm unable to find the TrueGrid chickbox. Has it been removed?
-- mortarm

You are the first who recognized it. A change in the current chrome browser made TrueGrid next to unusable.
The TrueGrid project was way too ambitious and the user interface never worked very well.
Since there are tools like https://vcvrack.com/ I thought it did not make enough sense to put more developer effort in it ...
TrueGrid is still there but it is hidden.
If MG users protest I will bring it back, but that did not happen yet ...

While on the MU format subject, given that some other firms beside COTK are now doing half-height modules, might it be time to add a half-tier option to MU? Something similar to how 1U tiles work in Eurorack...much the same row selection method could be employed in the rack creation interface, I should think.
-- Lugia

Yes, that would be a welcome addition! :-)

The CP format has the same inconsistency problem between module heights that eurorack 1U tiles have. COTK CP modules are slightly taller at 147 mm then the ones everyone else makes at 143 mm. But I guess that's just something the end users need to be aware of before attempting to add CP modules to their physical systems.

Here's a thread on Muff's that discusses the differences:
https://www.muffwiggler.com/forum/viewtopic.php?t=120103

EDITED May 15th 2018, 07:23

Bought an Ornament & Crime from @zfrucht

Great build with loads of options, very friendly and was helpful when there was a slight problem with the shipping.

Overall great value :)

I'm unable to find the TrueGrid chickbox. Has it been removed?

Just bought something from @Larkstarr. Very responsive, fast shipping. Great experience!

It's sort of hard to describe. Depending on which partial has had phase changes, there can be obvious timbral changes...or nothing noticeable at all. The phase-change effects get more apparent as the partials get closer together in frequency, and ultimately wind up affecting each other more than the fundamental at that point.

Of course, this is only referring to fixed phase changes. If the phase changes are modulated, then a lot of timbral evolution/alteration becomes apparent, since human hearing has problems with hearing phase in of itself, but if phase of a frequency is shifting against something else, we perceive it much more readily.

Hi Voider,

Thanks very much for your info, will give that a try.

Cheers

What would it sound like if you put the harmonics out of phase with the fudemental

I've recently completed my first skiff so really just a novice myself, but if you haven't yet
I would recommend VCV rack. Especially if your interested in the mutable modules, great testing ground and its free.
Also The Befaco Rampage module is in there which could give you a better idea of what you can achieve with the Maths
(which is Awesome).

https://cdn.modulargrid.net/img/racks/modulargrid_650962.jpg

You can never have too many VCAs.

Thanks to Lugia for the input, this is the completed Skiff
https://cdn.modulargrid.net/img/racks/modulargrid_650962.jpg

If Anyone is interested check earlier post for the other gear I'm using in my current setup.
Already thinking I'll need a small utility rack (Quad VCA, mixer module, maybe the new Bastl midi module?)

And more cables...

I bought an uTemps module from @RTFM (who also built it). Overall a very nice and friendly person. Offered several customization options on buttons and knobs. The build quality was perfect. Highly recommended!

Please click on the rack, for some reason the link does not show all of my modules. Thanks!

I have put together a possible eurorack system. I am a newcomer and hope to learn modular using what I have put together here. At the moment i am using a mother 32 to try to learn the basics. I am also using Maschine Mk3 to sequence the M32 via MIDI and play drums. I mainly make music with a 4 -4 beat and like alternative / glitchy interesting sounds and effects. The aim of getting into modular is to experiment and be a more hands on instead of using software. I do hope to explore using Reaktor Blocks (hence the inclusion of ES-8) with the modular rack I build (I think) but after I have learnt the basics.

I think what I have included here is at the top end of my budget for now, but I hope to continue to expand if it goes well.

Assuming my ideas are ok what 4 modules of the above would you buy first?

Feedback appreciated, I am a complete newcomer!

https://cdn.modulargrid.net/img/racks/modulargrid_661838.jpg

I think a neat idea would be some sort of plug-in for the virtual rack system where the program calculates the ideal placement of any given collection of modules, based on an algorithm that finds the shortest distance possible from ALL of the jacks to ALL of the jacks, using the least (imagined) cable possible. It seems like there would be a cluster or arrangement that would by far be the most efficient way to make connections, for any given assortment arranged in a case.

In general, I think that using actual bus boards is preferable to using flying bus cables except in smaller builds. A handful of modules on a single flying bus isn't going to create the draw issues and potential interference that loading a flying bus out totally might cause. Plus, bus boards can be had which incorporate filtering which improves noise factors, reduces interference leakage across the DC busses, and so forth. That's just not possible with a simple length of ribbon cable with some clipped-on connectors.

As for the tiles, check here: http://syinsi.com/Shop/other/ Power connections for tiles, on boards with filtering, which is pretty snazzy and definitely an improvement over the splitter-cable-off-a-16-pin previous methods.

Hi everyone,

I've got a 4ms row power 40 and I'm looking to power a 7u synthrotek 84hp case. I think my options include flying bus cables or bus sticks. One order of the flying bus cables includes 13 headers, but I'll need 15 plus another for a row of 1u tiles. This is my first rig, and I'm not sure if I should get a combination of cables and a bus stick, or if I can chain the bus cables together? Any help is much appreciated. Thanks

EDITED May 11th 2018, 23:17

Bought a Basimilus Iteritas Alter from @robocoder. Shipment from Japan to Belgium done in a breeze, organised by him in a way to avoid hurdles with custom. Packaging was incredibly robust and professional. For sure I would buy again from him with closed eyes! Thx again for the great & easy deal, man!

Hey everyone, if your module sounds quiet there are trim pots to adjust things. The top one simply adjusts white noise peak to peak voltage (mine was very quiet and so I nearly sold the module). I think the others do similar for their respective noise output, with perhaps some other effects because of the filtering involved in them.

I am surprised they don't really mention this anywhere, I would've thought it should be on this page. Would be good if anyone with more detailed info on each pot and the effect it has would post some bullet points for us all!

Check out my modular channel, it's full of droning bleepy shite

EDITED May 11th 2018, 09:08

Much more scrunching:

This is a little more like it. Notice that this comes in at a hair under $10k, where your original build was $17k+. Two harmonic oscillators, two complex oscillators, both the Fumana and Koma mixer. Ample modulation sources of the right sort, four LPGs with four matched EGs. Clocking and sequencing are a lot more complex, plus the Serge TKB clone was added as a pretty much 1:1 replacement for the similar Buchla touchplate sequential controller. Signal input with envelope follower and, yes, quad outputs. One note, though: the fixed filter bank in the top row could be subbed out for a multimode VCF of the right size; I felt, however, that since West Coast is about waveshaping and since the Instruos have wavefolders onboard already, some sort of fixed equalization-type filter was more in line with the timbral alteration idea.

While it's not exactly Buchla appearance-wise, believe me, this is in the right ballpark without spending an arm and a leg. Cases, btw, are a pair of Erica 126 hp powered cases, optimally housed in one of their dual case end-panel sets. Very ample power supplies in these, so the draw I came up with is nowhere close to their limits.

EDITED May 10th 2018, 21:06

Nope, it does not have usb and very few cv outputs.

I broke the rule and already ordered bela & rebeltechnologies Salt module along with expander. When everything else consists of 2-4hp modules, its fine.

Salt is fully programmable and it runs custom Linux, latency is below 1 ms, measured in microseconds! This way I can run my Pure-Data patches directly in modular and it can run fx, cv-generation and oscillators simultaneously, this way I need fewer modules :) Just need to configure it for my needs and then connect to usb-midi controller.

I thought about Experts-Sleepers new midi-cv module, but could not wait until July, and it is rather small + requires constant computer to run Pure Data.

Thank you very much again! So very informative :). I've remodeled for a smaller starting setup - - the Koma Mixer & Fumana are both superb & superbly expensive piece of gear - and after watching demos - Fumana is the choice. For mix i'll do with Scan & Pan's for now; maybe when i finish the rack i'll go further with this. Should be enough ? Suggestions ?