nice and groovy at the end! good job!

Neither came up when searching on the search for the name anushri nor under the mutable instruments category, so I guess thats a bug.

It's 1 hp first beacuse I need something to spare with a 3hp module (malekko noise) and then because I think that more than 1 hp to set 3 jumper would be a waste of space.
Of course I don't blame or critics xaoc for their technical choiches, but if I can made a module more close to my likes...why not?
Please if have suggestions write and I'll consider it! Think to do a run of panel in a month or so.

Multitrack demos so often obscure the raw sound source - so here are the raw unprocessed samples broken out - no EQ, compression or effects of any kind, followed by a fully (home) produced multitrack composition. All parts are from the Makenoise Telharmonic except the last clicky kik part, a sine from the Cyclebox. Sequences played from Rene sequencer. Also posting a full version of the piece here

EDITED Mar 18th 2016, 22:03

https://www.modulargrid.net/e/mutable-instruments-anushri
https://www.modulargrid.net/e/mutable-instruments-anushri-eurorack

I've been having the same project on hold until I get my Batumi. Been in the planner since forever! 1hp is ideal. Colour me intersted, especially for the panel.

EDITED Mar 18th 2016, 09:33

TBH 2hp would be ideal for me too, but i'll take 1hp over 3hp in this instance :)

DBL Post

EDITED Mar 17th 2016, 22:58

There are two expanders for the Batumi - one is 3 hp and now another is 1 hp. I would build this but make it into a 2 hp strip. These odd numbers are a PITA.

Big up respect to @solitud for a smooth transaction and an insightful conversation. Ø 5.00 (1 Vote) Average Rating

Awesome - fingers crossed it goes ahead

If this goes ahead as an actual PCB/Panel well colour me interested!
-- basicbasic

Well no pcb will be involved, it's just a panel with three switch! Maybe I'll do a small run of panel just to reduce cost. In case I'll update here!
Cheers!

If this goes ahead as an actual PCB/Panel well colour me interested!

@Maffez nice easy purchase. Item was well packed and great comms. Recommended :-)

uh really? nice one, thx for the tip! gotta look out for that, mine now finally works with one screw...i had to try all spots and then fit all the rest in, according to the tempi :D

oh sorry about that, mine does fit well with two screws, you should email make noise, i read on muff's they were gonna get new panels or something...

tempi is a great module .. what´s not great is that the holes are so damn off that i cant fit in none of my 5 racks, not even one screw. except one with gliding nuts, and there´s no space nor need for it there. bummer.

Can you make it smaller? I only have 0.5hp free in my case.
-- sempervirent

ahaha I'll try! Maybe 1U also...

Can you make it smaller? I only have 0.5hp free in my case.

DIY builds are no official Mutable Instruments modules.
That is the reason we reassigned it to other/unknown.

Hi!! I'm building my first system, I'm waiting for the arrival of this modules but I wonder if you think I'm missing something or is there something redundant.
Thanx in advance;)

Anyone else?

Excellent, thanks! Any thoughts on price and availability?

A) is how!

How will the signal of a channel be sent to the Cue Mix?
A) by muting the channel (using the channel level), or
B) by switching Aux to "Pre" (using the Aux level), or
C) using dedicated buttons on the expander module?

nope. that's where they settled:)

Thanks @chiavere for the great deal and fast shipping on the Blue Lanten subharmonics generator.

Had a smooth, positive experience working with @yufo

Would work with him again for sure.

Thanks, @grieve for quick shipping and a friendly and easy transaction with my mix mult.

This will be my new 9 U Rack, its actual emty

Its primary a Synth, some Lines below are the 6 U Rack that wants to be a Drummachine, need here some suggestions too.

A idea about the Sequencer:

(nice or too much?)

9U is controlled by the PC over Midi, later the 9U will control the Sequencer by the clocking from it.
Musicstyles are mixed electronic from Experimental, Drum n Bass, IDM, BigBeat, Dubstep to Dub.

Thanks Feedback.

Bought a Dwarfcraft Yep module from @MogwaiSamurai . Good sale for me.

Thanks guys, I just measured 43mm deep with backpack and cables, specs updated. (Power specs were updated to 100ma a few weeks ago, as a rough estimate.)

and it´s 5 cms deep with all the packs and cables ...

The pro account does this!

https://www.modulargrid.net/e/users/pro_index

Thanks @moket808 for selling me your Korgasmatron II. Nice doing business with you!

Hi Modulargrid-Guys,
want to make a 5 Row Rack (5x3U) because i want to have my two Racks in One.
Its the best way to have booth in one Editor.
1x 9U and 1x 6U = 15U = 5 Rows or separated 2 Cases.
Don´t want to switch between my actual two Racks, so the best way was add 3 + 2.
But isn´t possible

u optimize zhis pls?

This appears to be a duplicate of this entry: https://www.modulargrid.net/e/random-source-serge-wave-multipliers-vcm
-- 337is

Totally missed that somehow...I'll delete as soon as the site realizes I've removed the duplicate from my rack.

-- ryangaston

I marked this as unlisted because it is a duplicate. Here is the original listing:

I'm going to put it back as unlisted again so that no one else uses it. Thx

Cheers!

This appears to be a duplicate of this entry: https://www.modulargrid.net/e/random-source-serge-wave-multipliers-vcm
-- 337is

Totally missed that somehow...I'll delete as soon as the site realizes I've removed the duplicate from my rack.

This appears to be a duplicate of this entry: https://www.modulargrid.net/e/random-source-serge-wave-multipliers-vcm

marketplace automatic cleanup

All offers older than three month will be automatically deleted.
The sellers will be informed via private message beforehand, so they have a chance to b.u.m.p. their offers (and prevent the deletion).

I picked up an assembled thonk reverb kit from @meltermusic. Good build execution and pleasant transaction. shipped quickly, packed well. My thanks.

Hey AudioResearch,

Thanks for the response, pingable looks really nice. Any other more minimal in mind?

Could you elaborate on the Patch you mention with envelop/function generator, osc and offset module?

Thanks in advance,
dmtrs

I'd checkout the 4ms pingable envelope generator. It does attack and decay as this envelope does and has the attenuation control within the module via scale knob, equivalent to the pitch env initial. Curve at 12 o'clock and skew all the way CW you have the above linear envelope. Also the ping input can take the output of your clock so you can get for instance a pitch envelope of 500ms at 1/4 division if clock is at 120 bpm, which can be nice and musical and would function as the time control. Then all you do is patch the env out into the v/oct input of whatever oscillator u r using.

http://www.4mspedals.com/peg-kit.php

You can do this already if you have an envelope/function generator, oscillator and offset module, most oscillators have at least two cv inputs for frequency for this reason.

cheers!

This ![my future rack](https://cdn.modulargrid.net/img/racks/modulargrid_264526.jpg) makes your picture appear inline with the text:

When in Reply/Edit mode click Markdown Syntax below to see more tricks.
Cheers

EDITED Mar 10th 2016, 07:44

Hello there,
I am looking for a Eurorack Module for Pitch Envelope.
What I am trying to get is the functionality in an Ableton Live instrument called Analog. Here is a screenshot of this part:

The minimum requirements is for:
- a % Env Amount to increase/decrease the pitch based on the input pitch
- decay/time functionality
- CV in to trigger and Pitch in/out

Any suggestions? A DIY module would be preferable.
Thanks in advance,
Dmtrs

save your self a few thousand $'s and forget about the 2 extra rows ;)

get disting ,new wogglebug ,Function,Optomix rev2 2016
machine2 +mother32 is already a pretty powerfull setup !!
maths is great but you may get in to the "modulation trap "
to many mod sources , not enough things to plug them into ...
.....and the the spending continues

drop Pamela workout , the tiptop smart vco and eurorack FX
FX's are not really needed if you have a computer , use CVtoMIDI to control FX on your computer

cheers

https://cdn.modulargrid.net/img/racks/modulargrid_264526.jpg
Aloha All,

So this is what I've come up...and I'm asking for advice. Everything on the top row, I already own. The bottom two rows I am considering for completing my first euro rack. I've got a maschine 2, as well as a Sub 37 in my studio.

Am I missing anything? Anything unnecessary (including the racks Ive already purchased? :(

My goal is to make chill rhythms for my hip hop.

Cheers!

PS - Anyone be so kind as to tell how I may insert the jpeg of my rack into my post instead of a link?

EDITED Mar 9th 2016, 17:06

The micro zeus only has 10 spaces with the flying bus boards. You'd have to figure out a way to plug all of that stuff in.
-- cedworth

Good point... A couple of 4ms 40's should fix that yes?

The micro zeus only has 10 spaces with the flying bus boards. You'd have to figure out a way to plug all of that stuff in.