All Posts

If you were powering the Case with a small wind turbine I'd be interested haha!
I'm sure I'll be listening to this a bit later this evening.

EDITED May 23rd, 17:48

This video demonstrates how, with a cheap anemometer, you can use the wind as a source of random modulation for a modular synthesizer. Here, I'm simulating wind chimes. A nice way to get out into the open air and collaborate musically with the elements!

MPC One + beat

Hi,

I moved to a smaller case, pared everything down for a live set up which is okay but ended up with these left overs that dont have a home.

Would you see a use case for these as a rack in and of themselves?

Apart from the Deflector Shield and the 171-2 I'm half of a mind to sell....or store...

Your opinion, please? My first time post so I'm not sure if I am sharing my rack correctly:

https://cdn.modulargrid.net/img/racks/modulargrid_2859139.jpg

Cheers

an ACID test here :

demo video

EDITED May 23rd, 07:36

Hi,

I am 31 years on collecting gear.

I need help to use the marketplace, readed several times the instructions, I am member for over 3 months, but can´t put adds.

Any help please? I am bad with computers, DAWless man here.

Best
-- Akailama

Hi, open the detail page of the module you want to sell. Scroll to the section 'Marketplace'. There should be a button 'Offer on Marketplace'. Clicking it goes to the page where you can create your offer and then click 'Submit Offer'.

-- amethyst

Thanks! It worked, now I need to learn how to upload pics here.

I think I did an err putting a wanted to buy module, did I?

Thanks and sorry

Hi,

I am 31 years on collecting gear.

I need help to use the marketplace, readed several times the instructions, I am member for over 3 months, but can´t put adds.

Any help please? I am bad with computers, DAWless man here.

Best
-- Akailama

Hi, open the detail page of the module you want to sell. Scroll to the section 'Marketplace'. There should be a button 'Offer on Marketplace'. Clicking it goes to the page where you can create your offer and then click 'Submit Offer'.

Hi,

I am 31 years on collecting gear.

I need help to use the marketplace, readed several times the instructions, I am member for over 3 months, but can´t put adds.

Any help please? I am bad with computers, DAWless man here.

Best

In your user preferences you find a drop down menu Country Selection.
Select a country within the EU there.
Click here: https://www.modulargrid.net/e/users/edit
-- modulargrid

Hello~
Thx for your great service all these years!!
How do I get my store listed on each modules pages on the right side of the page? I have been selling Eurorack modules for over 13 years. I would like more people to know cool modules I offer from my shop... thx in advance!! Tada website: www.boutiquepedalnyc.us email: tada@boutiquepedalnyc.com

https://cdn.modulargrid.net/img/racks/modulargrid_2846966.jpg
new to eurorack
can I ask for your opinion about this rack?
mostly for drum trigger and drum manipulation with Cubase

thank you
Mike

https://cdn.modulargrid.net/img/racks/modulargrid_2846966.jpg
new to eurorack
can I ask for your opinion about this rack?
mostly for drum trigger and drum manipulation with Cubase

thank you
Mike

EDITED May 21st, 17:21

thanks mate. Maybe a bad cable then :( It came with module, but was a used module - totally sucks :((

Hi, sorry for your loss :(
maybe a bad ribbon cable?
https://www.reddit.com/r/modular/comments/kqcohn/always_check_your_ribbon_cables_before_using_them/

new to modular - so maybe this is a rite of passage :(

been biuling my first case. i have been pretty patient and still wating to get the modules i need / want. Can't afford everything at once and want to learn what i do but first.

Installed a few modules today in an intellijel palette 104. Switched it on and a second later a puff of electrical smoke from my pamelas pro workout.

clearly i fucked something up. keen to know what. The palette has shrounded headers so i plugged in the only way i could there, and tge module says RED at the bottom, so plugged the ribbon cable with red at the bottom. what did i do wrong? And how tge f*ck am i going to install everything else safely. seems like some modules are marked, others not. and even if you follow that it might not be right!

is there a way for me to test things properly without damaging modules? i cant afford to replace modules as i go! :D

Any help apprecaited. and sorry for the dumbass / newbie questions.

Seeing that you can switch between € and $, and in US no VAT it seems more logical to me now, though I realised that the stores on the right of the screen are either UK or EU added to my confusion on this point. It would be more consistent to set prices without VAT, and actually mention that next to the price. At least the mystery is solved for me now. Thanks for all your replies, I appreciate it.

Don't forget that we also have 'user generated content' on here, any user can submit a module.

wow thank you for that very in depth response! I am aware there's alot of behringer here, I looked at this setup as my modular with training wheels. Learn the basics, then move onto more advanced modules. My plan is to move onto the original manufactures, or DIY kits when I have a better idea of what I am looking at and what I'm doing.

i will definitely look into O&C and the intellijel quad.

I'm a big fan of the Ornament & Crime. Quite a few manufacturers make them nowadays, After Later and Cal Synth have a nice 8hp version. With stock firmware it can be a great flexible quad quantizer or a modulation source of many flavors. There's also the Hemispheres firmware that lets you run 2 different programs on each half, so you could have a 2 channel quantizer plus 2 channels of fun modulation or logic or whatever combination you want.

Pam's (New or Pro) Workshop is also great as a clock and modulation source, and can be set up as a quantizer as well.

For great modulation, Xaoc Batumi is a classic for a reason, and Behringer has their clone if you don't want to shell out for the original.

The other thing I'd very strongly recommend is a quad cascading VCA, a la the Intellijel Quad VCA or a Mutable Instruments Veils clone, and again Behringer has their version of it now too.

If you could only get two more modules, I'd say the Ornament and Crime and a quad VCA would be my recommendation.

Also if you haven't already looked up the Maths Illustrated Supplement, that will teach you a ton in the way of voltages and the many different uses for your Abacus. You'll probably want a second Abacus after that : )

Cheers and happy patching!

Thanks - and apologies for upping your anxiety level!

AFAIK stores in the US don't include VAT since it varies by state so manufacturers' recommended retail prices tend to not include it. It is different in (most of) the EU.

EDITED May 21st, 11:00

That, I personally find weird. I understand your point, but whenever I visit a musicstore online it shows prices including VAT. Perhaps they should limit it to mention a retail price including VAT on modulargrid.

I'd like to see the Marketplace region (and Reverb offer choice) stored in my user preferences. It'd be nice to not always have to reselect those.

Also, some manufacturers enter the price including VAT, some without (especially those from Northern America). Add a typical european VAT of around 20% to Multigrain and you're in the ballpark of current retail prices.

EDITED May 20th, 15:02

Any chance of an Ignore User feature?

Report Spam button?

Ty for the consideration!

The idea alone made me anxious.

Good work!

Hello, I can get CV and Trigger out of tracks B, C and D of SIG, but not out of track A. What setting am I missing?
Greetings, Alex

Hi,
because some manufacturers don't update the price. Some do it.

As an example; I was looking on Modulargrid for Intellijel's Multigrain. The set price is approx. €432. However, in stores the actual price is around €539, which is a huge difference. Why are these prices set so low in Modulargrid?

What do rising sea-levels sound like? How might we listen to the temperature of the oceans? What rhythms can we hear in the growing recurrence of hurricanes/cylones? Can we imagine mounting CO2 emissions as a crescendo of dissonance?

This piece uses a data sonification module (Loud Numbers) to translate spreadsheets of climate-change data into MIDI cc values. An interface (CV.OCD) then converts the MIDI to voltages to control my Eurorack system. ADDAC’s Swell Physics’ CV inputs for swell size, agitation, offset, etc. are ideal for modelling the complex, unpredictable effect of rising sea levels, sea temperatures, and storm intensity, on ocean waves. Meanwhile, Disting EX’s “spectral freeze” algorithm is processing ocean-related songs.

Would be great if the format, eg eurorack, serge, buchla etc once selected could be stored in local storage or a cookie or whatever so that you dont have to switch for each visit (if eurorack is not your primary choice) as its currently by default.

Hi, i found two options for this:
1) "offset" option in the LEN(gth) menu. "hold ALT while turning the encoder to change the offset of the starting stage. " - i found this not as useful to set offset in LEN menu but instead modulating the offset via CV-in or Modlane.

2)"Skip" function also works, skip the stages until the one you want to start from and then "You can quickly swap which steps are skipped and which are un-skipped if you assign
“Skip Invert” as the destination of a CTRL knob, AUX Input (X, Y or Z) input or a MOD Lane."

EDITED May 19th, 11:28

hey there, why no other company go after this special filter? it is really hard to recrate? From what I remember was made witthout any rare filter chip and can be recreated with equivalent components

thanks! any module recommendations?

abcd seq & septha works 5

This setup in action

More modulation and yes, probably more clock fun.

Awesome.
Benjolin + fx´s is actually, one of my favorite things to do :D
-- VONDENFUNKEN

At first i thought the benjolin was hard work, but when you throw some modulation and effects at it it gives you plenty to think about. Its good fun.

Awesome.
Benjolin + fx´s is actually, one of my favorite things to do :D

I recently got a Benjolin, its a weird old box of frogs isn't it!
Its a nice looking White and Gold one from Meta Audio Labs
Lots of cross modulation going on, Ochd is modulating the benjolin and the benjolin is modulating Ochd, Sloths is also modulating the Benjolin and bringing the reverb'd parts in and out on the SSF Vortices.

Its certainly interesting to play with!

https://cdn.modulargrid.net/img/racks/modulargrid_2378394.jpg

New to eurorack, this started about 5 years ago when my wife purchased the cre8audio nifty bundle for me for xmas, been picking up the behringer modules over the past few years so I can learn without breaking the bank. The plan was/is to start small and move onto other manufacturers/builders/diy once i had the fundamentals down. Now I have a decent amount of modules, and am in love with the endless possibilities, but I feel like I am missing something, clock? quantizer?

I think I have plenty of oscillators, I have another behringer 182 sequencer that is not racked.

Thank you in advance.

Hello folks!
Maybe this is off-topic, but I noticed some discussion about @sugarfreedaddy. Just wanted to have a feedback here, I bought a module recently from him. Everything went fine, and he shipped the module quickly, so overall I have a great experience with him. As I see he is all legit and a nice dude.
Happy patching! :)
-- sleepy_owl
I bought 2 modules off him from the UK - no issues.....

Hello folks!
Maybe this is off-topic, but I noticed some discussion about @sugarfreedaddy. Just wanted to have a feedback here, I bought a module recently from him. Everything went fine, and he shipped the module quickly, so overall I have a great experience with him. As I see he is all legit and a nice dude.
Happy patching! :)

Hi! Yes, I love Lucas content. I think he's a great musician and his youtube channel its one of my favourites. Definitely the rack is inspired on his different iterations. Cheers!

Is it a beat?

Thanks for another +uJove, I am sorted for High Pass on my other 3 filters.

I think I'd go with the uJove, unless you need the high pass of the Ripley.