All Posts

Yeah I want it as well as the ALM Busy Circuits Super Coupe and Erica Synths Techno system. Saving up for each one.

Hi Garfield,

Ah I see so there are two cases in one for a full Doepfer Monster case I was unaware of that! Still we are talking 3k for the full monster and base Doepfer case and half that for the smaller but more portable 12-14U MDLR case. Plus you can patch the MDLR case and fold it up for travel purposes then open and connect to PA system and ready to perform.

Hi Sacguy71,

Well the concept of Doepfer cases is a bit different, that's why you can't lay them down. You can lay it down but you might not like the power plug make it "wobbly" ;-)

The idea instead is to use A-100LMB base case first (that gives you a half-laying/half-standing case) and on top of that you add a standing monster case.

I don't have an MDLR case, I was considering one however the power supply specifications aren't as good as those of Doepfer and the MDLR cases are more expensive on a per HP base than the Doepfer monster cases. I am actually (very) happy with the Doepfer (monster) cases, they provide some nice affordable space and are deep enough for most of the modules in the market.

Kind regards, Garfield.

Hi Miroslav,

I had the bigger brother Doepfer - A-190-5 and had enormously problems with understanding that module, so perhaps you have a similar issue with the A-190-4. I love to work with Doepfer's modules except these A-190-x series...

I also had connectivity problems, one of my problems was the MIDI channel setting with this A-190-4/5 module, so check if your MIDI channel settings are correct otherwise dig the manual again and read through it again. I had done that many times and barely could fix the problems. I exchanged the Doepfer module with a Vermona - qMI 2, so much better and logical than the Doepfer one.

Good luck with the troubleshooting and kind regards, Garfield.

Hi Broken-Form,

Wow that's a fast decision :-) Please let us know how your experience is with the Hermod. It's one of the candidates that I consider too.

Good luck, have fun with it and kind regards, Garfield.

ordered a hermod,but havent had time to use it yet

If I had an extra 4.5k still left hanging in the money tree, that Gold and Black system would be a solid pickup.

Hi all,

I have really enjoyed the process of adding different modules into cases from various eurorack companies as it adds variety and teaches me fundamentals. However, I have as of late been intrigued by the following pre-built modular systems that come with case/power, modules, etc:

Erica Synths Techno System- drums, bass, support modules, case/power and drum sequencer
Make Noise Black and Gold Shared System- love the Make Noise stuff and my 0-coast and 0-ctrl have been fun entry point
ALM Busy Circuits System Coupe- comes with case/power, Pamela New Workout, Squid Salmple, and more
Endorphin.es Shuttle System
Verbos Modular System
Buchla Easel Command- unique approach but never used a Buchla before and it is most affordable one they sell. I don't have 15k for the Skylab

Me too! Both you Jim and Lugia are super helpful and knowledgeable on modular stuff and everyone nice here. I need a few more switches, attenuators, logic modules and bigger larger rack. Thinking of the MDLR 14U case that also has 1u for Intellijel tile modules and dual power bus supplies.

https://www.mdlrcase.com/eurorack-case-14u-126hp-performer-series-pro/

Not cheap but one case to do what I want to expand further. Has anyone used the MDLR cases? If so, how do they compare to Doepfer Monster cases? I hate that you cannot lay down Doepfer cases flat and they don't tilt or have flexible setup. Want to add a larger sequencer and mixer to the larger new case in the future as well as larger modules that won't fit in smaller cases.

I am trying to control the pitch of A-110-2 VCO with Octatrack/Cirklon but nothing happens. I connect my sequencers midi out to A-190-4 (midi to CV interface) midi in. Then I connect A-190-4 CV1 to VCO 1V/Oct. And then I connect a wave to audio in of the octatrack. I hear continuous sound without pitch information. If Im connecting Gate instead of CV I hear "bumps" where midi notes are but still there is just one continuous sound. What am I doing wrong?

Hello,
i was wondering how works the sewastopol send/return for fx pedals.
Does it can send the inoming audio signal to the pedal following the envellope follower output signal?
In other terms is it possible to make the send audio signal to the pedal only when the envelope follower sends an envelope?

Thank you,

musically

Hello,
i was wondering how works the sewastopol 2 send/return for fx pedals.
Does it can send the incoming audio signal to the pedal following the envelope follower output signal?
In other terms is it possible to send the audio signal to the pedal only when the envelope follower sends an envelope?
i would like to use it like this :
An audio source of the modular is coming in the audio "to export" input, another (lfo) is plugged into the follow input.
When the lfo is down the incoming audio source is dry and when the lfo is up (and so haved turn the envelope on) the signal passes trhu the pedal and become wet until the envelope is on.

Thank you,

musically

Hi Cameliamusic,

Welcome to modular! I don't think I have seen it yet, so generally I would like you to advise not to buy everything at once. Start with a few main modules, gain some experience with them and then slowly by a few more, build up some more experience with them, and keep repeating till you either reached your target plan or till your bank account is zero ;-)

Many members have provided you already with some excellent comments, so there is not much to add other than the above remark.

Good luck, have fun with modular and kind regards, Garfield Modular.

Edit: Removed typo.
-- GarfieldModular

Hehehe, so far I only have 2 modules in my rack but I plan to learn them as well as I can before moving onto the next one! I don’t want to get overzealous & then end up learning 5 modules at the same time. I’m looking forward to the long & wonderful journey ahead! Thank you for your input, Garfield!

Both Disting EX and Ornament and Crime are swiss army knife modules of modular! Either is worth checking out.
-- sacguy71

Yes! I’ve had my eye on the OC as well, but seeing that it’s more geared toward sequencing, I think the Disting EX seems like a more logical choice given the amount of sequencing options I have available at the moment!

Hey Garfield,

there seems to be a new and maybe interesting thread on muffs, have a look:

https://www.muffwiggler.com/forum/viewtopic.php?f=16&t=238848

Best,
jingo

Hi Garfield,

I made progress working with the Varigate 4+ tonite in cranking out some decent modular sequences. It shines with the Malekko Quad Envelope module for creating various patterns. Still a pain to work with this sequencer so my next one will be more precise and have ability to create presets, chains, and songs. I will visit some synth shops after COVID ends hopefully next year to try a bunch out. Right now, my Noise Engineering and IME/Harvestman modules are my favorites so far and have tons of modulation possibilities even if they are digital they sound so amazing in 1-2 modules.

Don't mind Jim, he means well. In fact, I really appreciate his candid honesty. I took advice and Kinks and Links are wonderful modules that do soo much in patches and take up small amount of space. I also have Elektrons to sequence but modular sequencers are sooo much more fun! I recommend something like Mimetic Digitalis or Intellijel Steppy as they do a lot in little space for sequencer. I highly recommend you get a free copy of the VCVRack software it really helps you plan and try out modules of different types and combos. I discovered Mutable Instruments that way and it helps me better understand what changes would do to my setups before I spend any money. If you want a modular sequencer and don't want to use rack space, get a Korg SQ-1, it is dirt cheap and a powerful starter sequencer with multiple gate/cv patch points that can do 8-16 step sequencing. I love mine.

do you need attenuators and multiples in the rack yet - probably not

I'd use the attenuators and multiples to split and control modulation sources of the analog 4. Maybe I don't need them yet in this minimal setup, but they were cheap anyway, and I reckon they will become handy later if the setup grows.
-- SolNoctis

Personal opinion : attenuators are a total waste of money and, more importantly, HP. Instead get an Attenuverter + Offset module.
- Cheap option : Ladik U-012 Dual Attenuverter + DC
- Three channels and it's also a mixer : Happy Nerding 3 x MIA
- Similar but different : Frap Tools 321
- More flexible routing and it also a 4 quadrant amplifier : Befaco a*b + c
If you really want three passive attenuators you can find much smaller and cheaper version alternatives the Behringer inhere. (Cheaper than Behringer?! True!)

In my small setup, I never had a use for multiples -- I use stack cables. OTOH switched multiples are a whole different proposition. This one is no bigger than the one you picked, also has 8 ports and has 3-position switches for all the outputs. It's a kit but it is super easy, even I managed it.

Hi Mog00,

Oh wow! That's beautiful and magical at the same time. Those sounds that keeps coming have all those gone through that I-047 filter from Instruo? Sounds indeed like a lovely filter!

Nice modulation experiment! Thank you very much for sharing this and kind regards, Garfield.

Hey Jingo,

Good to hear that you are happy with your Drum Sequencer from Erica Synths and pity Erica Synths still haven't released their Black Sequencer; most likely same or similar issues as Endorphin.es with their Ground Control.

Worst case scenario that I see is that I have to let go the idea of getting one sequencer that has many channels (3 or more) and 8 (or more) triggers. Perhaps I have to split that into two sequencers, one for the full channels and one for the triggers. That makes it most likely more expensive and it might take more HP space but perhaps it's then easier to get to a perfect "sequencer combination" ;-)

Thanks for checking out the manual of the Metron, I went already through it, several times now but I can't find anything related to different running direction modes... pity otherwise beside the Five12 that might have been a nice sequencer too...

While waiting for Ground Control and the Black Sequencer, I can check on that sequencer "split idea".

Thanks for your help and kind regards, Garfield.

Hi The-Erc,

Now we are talking! This is a fantastic track, really. Starting with that great kick sound and then every once and a while you throw in another nice, interesting and by times a beautiful sound as well. Large variation keeps the listener left amazed in his/her chair, jaw dropped open, just not believing one can add so much great variation in just one single track.

As you might know, Techno is not particularly my cup of tea, though this sounds like kind of Techno to me, thus if this is a new-style Techno, then I will be soon a serious Techno fan ;-)

Very well done, I hope you stay healthy and I "hearing" forwards for your next superb track! Kind regards, Garfield.

Hi Sacguy71,

The WMD - Metron with extension modules Axxent and minimum of two Volteras might be indeed a nice sequencer too but bloody expensive and in the manual of Metron I can't find any information about if that sequencer can do running other than forwards, I would expect from a modern sequencer at least backwards and random as well and if possible a ping-pong run too.

Any member has a Metron who can confirm about those running direction modes?

Thank you very much in advance and kind regards, Garfield.

Hi Cameliamusic,

Welcome to modular! I don't think I have seen it yet, so generally I would like you to advise not to buy everything at once. Start with a few main modules, gain some experience with them and then slowly by a few more, build up some more experience with them, and keep repeating till you either reached your target plan or till your bank account is zero ;-)

Many members have provided you already with some excellent comments, so there is not much to add other than the above remark.

Good luck, have fun with modular and kind regards, Garfield Modular.

Edit: Removed typo.

EDITED Oct 15th 2020, 21:31

still quite new, but Kinks is fantastic, I love it for the rectifier section alone, throw in some logic and S&H, I always find a use for it in a patch, all the recommendations are fantastic, but there is a reason why kinks and links are brought up again and again and so glad I listened.

Thanks @troux, I am really just experimenting with textures not focused on complete tracks. So much to get a grasp on. I have to say I really love the Instruo I-o47 filter the strike input with high resonance and low cutoff really creates deep thunderous booms that sound great (to me at least). Going to be working my way through the Disting Mk4 and Maths over the next few weeks making a patch using a new mode of the Disting each time.

Both Disting EX and Ornament and Crime are swiss army knife modules of modular! Either is worth checking out.

I'd swap the Batumi and its breakout for a Maths, Batumi is great but you'll learn more with Maths and the attenuators are super useful. From there you'll learn which direction you want to go, whether you want more LFOs, or envelopes or whatnot. Jim will probably chime in and tell you to get a Kinks or a Links, I'd pick the former if I had to pick one but it might not hurt to get both here.

Hi,

I'm finishing the first stage of my modular system for ambient and experimental music:
Carpathia - providing a link here since MG's CDN is caching images heavily ...

For now, it's mostly a linear composition approach - that's why I choose Hermod as the main sequencing and gates source (but not limited to). 4ms SWN with 6 voices as main oscillator + NE Ataraxic Iteritas for some weird sounds and melodies + BIA for some percussion and probably bass lines.

In the future, I'm going to add an additional sequencer and clock source for some generative composition approaches.
What do you think about the number of modulation sources? Maybe I should add more envelopes?

Since I'm just starting, I'll really appreciate your feedback and opinions on the current stage and set of modules.

Thanks in advance!

Nice textures @mog00, I like the space and the kind of "drifting and moving at the same time" feel. Looking forward to hearing more.

the ES9 is an excellent tool for just that cv (including pitch) and audio to and from rack and computer - Silent Way or CV Tools work well once set up I believe

personally I mostly use it (actually an ES8 in my case) for audio - including a clock out from Logic

well I was taking the piss a bit!!! - most people claim they've spent a long time researching - when it is obvious that they haven't - or at least they have been researching in the wrong places - 6 months looking at videos of tiny focused cases that are one patch wonders - does not equal adequate research!!!

I always try and look as far ahead as possible for what modules I may want - so that if I buy/build a vca (or mixer or any other utility) I get one that is big enough for future requirements - which is why I recommend a quad cascading vca to beginners - but no harm in a smaller one - just my advice, which you can take or leave as you see fit - but do take a look at the "Jim and Lugia were right thread"!!!

as I probably stated above just get a few modules to start with and grow slowly - a sound source, a sound modifier, a modulation source, a way to play, a way to listen and a case

Marbles is great I use it in every patch near enough - currently with a branches attached to t2 (for skip/open/close hats) and a sinfonion as an extra external quantizer for the x section (not that you need a quantizer - as Marbles has 3 already) - if you like generative music then this is a great place to start

EDITED Oct 15th 2020, 12:30

Well, the reason I have the Mutant Brain in there is because I’m looking to get away from doing my sequencing from the laptop & keep everything in a nice network between the machines! I will definitely read the ES-9 manual before making a concrete decision but so far from what I’ve read, it seems to be a great solution for both audio & cv routing to & from the rack! I’ll also take a further look at the EX! Thanks again for all your help!

bought a MI Stages from @AXN_NL
great and trustful seller, well packed and fast shipping!

also bought a MI Blinds from @Squallaz
great seller, very well packed and a fast, fast shipping!

thank you both!

EDITED Oct 16th 2020, 12:47

The Cosmix is news to me, but it looks like a great set of features. No idea how it sounds, so I'd be interested to hear feedback from anyone who has tried it.

Thanks!! This looks great!
What do you think of the Cosmotronic Cosmix?
https://www.modulargrid.net/e/cosmotronic-cosmix
Probably too soft?

Thanks for the feedback.

you spent a few hours?!?!?! - hahaha hahaha and you seem to consider that "a lot of effort" hahahahaha and you spent 1200€ or so hahahaha

Well, I'm not claiming this took tons of effort to build, as it is only a minimal beginners eurorack setup to add to an already existing and constantly changing semi-modular setup. I know building a perfect eurorack takes years of research and buying modules to achieve something special, and that it is something that just can not be done in just a few hours. I'm just claiming I didn't go buy some random modules, without know what I'm buying. And I did ask myself first what I want to build and what I needed to buy to do that. I also researched the 'cons' of the rackbrute before buying the case with the wart.

maybe maybe I would have bought the erica wavetable - you need a vco and it's a vco - no opinion on it other than that

I first had the waldorf nw-01 in mind as a VCO. The erica just seemed to sound better to my ears.

why 2 filters?

Most of my favourite synths have 2 filters. I mostly use a first one to modulate the frequency with a lot of resonance, and than a second lowpass to just roll off the access of harshness of the resonance.

why only a dual vca? you can never have enough vcas!!!! obviously you didn't spend enough time on you tube (MylarMelodies video) - well maybe you can have enough (eventually) but as a first vca a quad cascading one like veils or intellijel is a better buy as they are more versatile

I could also use the fieldkit FX as extra VCA's, I think? It's a starter setup. I can always add more later, not?

why adsrs? mostly ads are used in modular - unless you are "playing a keyboard"!
If I'd play it with the keystep ADSR envelopes would be better than AD envelopes, right?

do you need attenuators and multiples in the rack yet - probably not

I'd use the attenuators and multiples to split and control modulation sources of the analog 4. Maybe I don't need them yet in this minimal setup, but they were cheap anyway, and I reckon they will become handy later if the setup grows.

why grandpa - wait until clouds 2 arrives check that out first - it will be soon - maybe even this year!!!
why disting mk4 when EX exists?

Will be looking into those as alternatives. Thanks!

to make this more rack more interesting quickly - add a another vco (something cheap and analogue, the doepfer basic one is fine or dreadbox or whatever) - add kinks - add a matrix mixer (doepfer is good but large - so maybe an AISynthesis one) - maths - really add maths and weep at the lack of space in the puny rack with the 5hp rack wart - add a fx aid or better yet fx aid xl or 2 - get a waveshaper - get a sequential switch - get a random modulation source - get a chaotic modulation source - get some sub mixers - or don't - play with what you have and learn it inside out
-- JimHowell1970

Any opinions on marbles?

Here's a three channel mixer/overdrive with mutes from TouellSkouarn. I love my Moffenmix, but it's definitely got a characteristic sound. I usually keep the gain pretty low unless I want to just destroy a sound.
https://www.modulargrid.net/e/touellskouarn-sonveskan

Looks like you kept the modules I suggested. Be sure that's what YOU want. It's your instrument, not mine, so go slowly and don't buy everything at once. Your actual rack will probably end up very different from this plan.
-- farkas
Yes, for sure. I'm working through the modules learning and getting a feel for each one as well as comparing to similar modules. I admit to feeling the urge to buy everything at once but it should grow more organically to give me time with each module.

Hi, i had the Moffenzeef - Moffenmix Mixer, but it didn´t sound good.
I had problems with clipping, of course it is a moffenzeef- module ;-)
but it was too strong.
Is there a mixer with a similar concept? 4 channels, mutes and optional distortion?
Thanks!!

Hey Garfield,

I really like es drum sequencer, its simple x0x0 sequencing with some bells&whistles.

Regarding the vector: you can use the 8 triggers for drum sequencing because those are "clock-like" triggers, but I use them mainly to clock other modules. So I understand your concern.

I dont have any experience with the metron, but you can find the manual here https://cdn.shopify.com/s/files/1/0977/3366/files/MetronVoltera_BookSpreads.pdf?373. I had a quick look into the manual and maybe it can run randomly, but I dont know whether there are other modes (does not seem so).

Best,
jingo

a smorgasbord of modules, experimenting with different modulation.

Lots to take away from this! I've already started to make adjustments after reading your previous response & a lot of it makes so much sense. I had a further look into Links/Kinks & now I see how valuable they can be & even better they fit so many utilities into a small amount of HP! I already scrapped Levit8 & the VC8 - as I had a feeling the amount of VCAs I had planned for this case was overkill & having a mixer with submix capabilities within a rack when I planned to buy an external mixer was quite redundant. In turn, I may add a 2hp mix for how nifty & convenient it is.

I would look at Happy Nerding for a small mixer - much more ergonomic than the 2hp ones!!!

Then, I was led to the realization that an ES-9 can indeed be incorporated into the rack like you had suggested & since it has SPDIF I/O, I can link it up to my Scarlett & BOOM, everything can be recorded into the DAW without the need for an external mixer! And instead of getting a cv.ocd to do my sequencing via MIDI, I added a Mutant Brain since plenty of space was freed up. The Disting got scrapped, as I now don't really know what I would use it for + I don't really want to deal with that tiny screen & its 1 million algorithms. I feel I still have plenty of research to do, but your feedback & suggestions really have cleared a lot of things up & I definitely feel more confident about the end results!
-- cameliamusic

I would read the ES9 manual thoroughly before committing based on SPDIF - I think it will be very (limited 2 channels) - although it can also be set up as a mixer - depending on the daw (and plugins) you are using you can also use it to send v/oct and modulation to the rack - and potentially not need a midi->cv module (which will potentially have higher latency)

Disting - I would get an EX - the whole point is you don't know what to use it for - so you'll have it when you need it - if you spend a short time setting up favourites.txt it's much easier to work with - menu is not deep - it's really useful for working out which modules you need

I would stop doing research (at least temporarily) - just buy a case and a few modules - a sound source, a sound modifier, a modulation source, a way to play and a way to listen - plus a few utilities (quad vca, links, kinks, something like shades maybe) and start patching - learn that inside out and then add a module and repeat

I like using VCVRacks to try new modules before spending cash on them as well as learning how different setups work. It is definitely motivating me to get the real physical versions of Plaits+Rings as they sound so lovely and many great options for dark and ambient plucky tones.

Thanks Garfield! Yeah, I learn trial and error and modular world is so crazy experimental compared to traditional hardware synths. Fortunately recreating that lovely drone tone you like is piece of cake. I modulate the NE Cursus Iteritas with LFO from the Kermit and use the Kinks for invert/mixer. Jim and Lugia would be happy to see me making heavy use of the Kinks and Links combo. Thanks to his tip, I bought these affordable smaller support modules and no regrets.

True sound exploration but I love it. I do want more percussion modules and maybe 1-2 voices to finish my setups and of course a clock, sequencer, and support modules like a switch, matrix mixer, etc. All in time. Saving for a much larger case as well.

EDITED Oct 15th 2020, 03:06

Hi Ivolvanov,

Wow that's a great nice little track! I don't know why but when I was listening at it I was thinking about acrobatics :-)

Well done, I like it and thanks a lot for sharing this. Kind regards, Garfield.
-- GarfieldModular

Thanks so much for listening!

Lots to take away from this! I've already started to make adjustments after reading your previous response & a lot of it makes so much sense. I had a further look into Links/Kinks & now I see how valuable they can be & even better they fit so many utilities into a small amount of HP! I already scrapped Levit8 & the VC8 - as I had a feeling the amount of VCAs I had planned for this case was overkill & having a mixer with submix capabilities within a rack when I planned to buy an external mixer was quite redundant. In turn, I may add a 2hp mix for how nifty & convenient it is. Then, I was led to the realization that an ES-9 can indeed be incorporated into the rack like you had suggested & since it has SPDIF I/O, I can link it up to my Scarlett & BOOM, everything can be recorded into the DAW without the need for an external mixer! And instead of getting a cv.ocd to do my sequencing via MIDI, I added a Mutant Brain since plenty of space was freed up. The Disting got scrapped, as I now don't really know what I would use it for + I don't really want to deal with that tiny screen & its 1 million algorithms. I feel I still have plenty of research to do, but your feedback & suggestions really have cleared a lot of things up & I definitely feel more confident about the end results!

Hey Jim! Thank you for your input on this!

NP

I added Cara into the rack as a last minute attempt to save space BUT originally, I planned (& will ultimately end up with) to have the actual Marbles in there! I hate how cramped the panel on Cara is. I really love the possibilities of random & probabilistic gates/triggers & voltages that Marbles provides & I would use it, for example, to trigger an Optomix or one of the Doepfer ADSR’s!

I use mine every patch - often these days through a sinfonion and branches (for hihat slip/open/close)

I’m actually so far VERY 50/50 on Clouds or any of its variations. Something about me likes it & wants to LOVE it, but I just can’t fully commit.

I know what you mean - I use mine a lot (mostly as a delay though) but right now I would wait to buy anything like this until after hearing clouds2

As for VCV Rack, in all honesty, I haven’t used it for quite some time now — a few months since I last opened it up.

I'm not a big fan either to be honest - maybe once or twice this year on flights in January - I think it's a great introduction though

As for the buffered mult, I totally agree. It was another thing I was thinking about ditching & since I probably won’t be doubling up on 1 pitch sequence to 2 different oscillators, it can definitely get the boot. Will definitely look into Links/Kinks & all their functions! I have read many posts on here recently & you’ve recommended this combo time & time again, so it must be for a good reason!

yeah but that is something that you may well want to do in the future - 2 vcos -> filter
which is why I recommend replacing it with links which has a buffered mult - just not 3

As for VCA’s, do you think there could be such thing as TOO MANY in this situation?
yes - 15 is too many, definitely not too many in some modular synths but it is in 6u - I'd be happy with a quad cascading vca (veils) and a dual lpg in 6u tbh

I just counted and I have 15 vcas including lpgs and vcas built into other modules like filters or vcos in about 24u - I need more vcas! well yes and no - I keep looking at the wmd performance mixer - and that has a load built in - which would free up the 6 standalone vcas nicely - which would be enough and would add voltage controlled panning - but it's expensive, a power hog and big - which all means I need another case and envelope generators for the vcas

Also, what do you say about Levit8? I like the ability that it can do more than attenuate & it also provides the possibility to create sub mixes before sending out to an external mixer.

but to what point? you probably won't need all that many channels of attenuation (some yes 8 probably not) and you won't need to sub mix before an external mixer if you buy the right external mixer!! which if you are going to buy one it makes sense to do!! if you already had a mixer and needed attenuators for each channel and/or wanted to just record stereo tracks then maybe

if you want sub-mixes before hitting a filter - great get something small - if you want some vc panning get a small module for that - if you want to mix some modulation (do this it is great) get a matrix mixer - but you are just taking up space that could be used for other things and negating the point of getting an external mixer

And as for tracking equipment that I have now into the DAW, I have a Scarlett 8i6 BUT all of its inputs are taken up by the 3 Elektrons so I am running Plaits to an external input on the Analog 4 which allows me to records my experiments & noodles for the moment!

I hate making multiple passes to record multitracks of the same piece on modular - so I would consider upgrading this (or extending with adat, if possible) - maybe with a mixer with proper usb multitrack capabilities and enough channels for everything you have now plus however many voices there are in this rack plus 1/2 as much again - so at least 12 channels, but 16-24 if at all possible, in total (for the

PNW is a module I have been watching very closely with googly eyes since its release & I really love how each of its 8 outputs can be freely assignable & I love that it has LFO’s & Euclidean options. I will definitely look more into Batumi & have a look at Zadar as well! They are both modules I have come across many times in my search, but for some reason, I never gave them much thought beyond a glance. I sincerely appreciate your feedback! It cleared up some things I was flip flopping back & forth about!

Yeah I have none of these modules - they are all very popular - and all have their pros and cons - and I think I want them all - and at the same time I want none of them - more vcas means more envelope generators and these 3 are kind of the top contenders - but then I might just go for a selection of diy envelopes - or a mix

Edit: Also, which matrix mixers would you recommend having a look at? I know Doepfer has one which seems to be popular. Matrix mixers are something I still have to wrap my head around as well but there’s plenty of time for that!
-- cameliamusic

AI Synthesis, doepfer (big), nonlinearcircuits - there aren't really that many to look at - not sure about the instruo one though - if I was even considering it I would also have to consider the 4ms vcamatrix - which is even bigger and more expensive - but I think I would like it more than the pin matrix - I'd loose the pins for starters!!!

they are pretty simple really - and really useful for feedback patching - self modulating modulation!!!

The kick is the DFAM oscillator 1 and filter. The hats and snare are the DFAM noise source, modulated by Pam. The filtered synth stabs at the beginning are coming from BIA through the Doepfer LPG. The other synth is oscillator 2 of DFAM, mixed with some noise from Hats909. All pitches from the DFAM sequencer, quantised by Disting. Everything else controlled by Pam. Off-screen there is outboard reverb and delay.

You can probably reconstruct the patch from the video :)

Hey Jingo,

Ah, you are using the drum sequencer from... Erica Synths? Happy with that one?

It's a pity that the Vector doesn't support more than 4 drums (I still don't understand why the Jack Expander offers 8 triggers if one only can use up to 4 drums, bit weird in my opinion), that puts me a bit off to be honest. That's really a pity because I thought I found in Five12 the perfect sequencer :-(

Yes you might be right and perhaps I should stay patience about the Ground Control.

Do you have any experience with WMD - Metron? It's the next one I consider (besides the Ground Control). I can't find in the Metron's manual if it can run backwards or randomly too? Do you know perhaps?

Thank you and kind regards, Garfield.