ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
much easier for us to help you - click through etc...
aren't instruo modules available on vcvrack now? if you are using vcvrack then I'd be tempted to use those in there
the harmonaig in particular seems way over the top for such a small case and so few voices - I'd want at least 4 before getting a module such as this and a sequencer (probably more than 1) to control it - which would also mean I would want a bigger case if this is the
again the black output module, the sample drum and the es9 seem too big for the case
but all the pico modules seem too small - especially with them all next to each other
and for me not enough utilities
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
Ha, ha, interesting request you got there. So accordingly to Jim's above experiences it seems to be not very easy to push it that far. So in case really nothing goes well regarding blowing up your power supply then try a thick copper wire (well insulated at those parts where you hold it) and make a good shortcut somewhere on the power bus :-)
If that blows the fuse before something really can happen then remove the fuse, put something bare metal in there, make sure your house electrical circuit fuse works very well (otherwise you might get a serious problem) and then try again to short cut the bus. Be bloody careful okay because this might give you some serious effects, you have been warned! :-) If you are not sure about this then please don't do it! A test should stay fun and especially safe!
Would you mind to make a video of it, in case you decide to go ahead with blowing up your power supply? Might be interesting material to watch ;-)
Good luck with blowing up the power supply, stay safe though and kind regards, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Yes you are back! :-) Nice video and you got a nice sequence going on throughout the track. It's interesting to watch (and of course listen) to your new module setup in your two Doepfer cases. I don't mind to see a few more videos coming from you!
Thank you very much for sharing and kind regards, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
the psu is supposed to be a direct clone of the one in the tiptop mantis - and that psu survives being overloaded at least by a bit - when turning on all the modules flash and then you turn it off, take something out and it works again
I even had one module in mine that would sometimes not turn on - I think it pushed the inrush on the -ve rail but I'm not certain - everything else would work, but not this one - turn the power off and on again and it would be fine - just started doing it one day
if you're going to try to blow the power supply up though, you could also destruction test the case! :D
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
Was curious what methods people could suggest to stress test a powered case (obviously, without just maxing it's power supply with modules)? Can you use a bench power supply to draw current? (never owned one). Are there devices made to do this? And if so, could you point me to an example device?
I'd really like to run an experiment on the Behringer Go and see once and for all whether this thing is likely to fry some modules and at what draw the whole system starts to become unstable.
Any advice would be greatly appreciated. My rack is filling out and, out of fear, I'm getting ready to upgrade from the GO to something more reputable/field-tested, and I figured it might be a useful, if anecdotal, experiment for the community to see how close to the spec'd power you can really push this thing.
Hi, I'm sketching my first layout and choosing modules for the Arturia Rack with a Minibrute 2S (no keyboard) and pairing with VCV-Rack as expansion or having the Arturia setup as a Stand-alone system...
My music would be ambient / textures / rhythmic experimental. So I hope to get some advise or ideas to swap modules, or missing components in my system setup. I've been experimenting a bit with VCV-Rack, and now I'm looking into a hardware system and using VCV-Rack for a system I'm not capable of buying ;-).
This still might be a very vague or big question to ask... but I wanna try to begin somewhere. Your thoughts might solidify my ideas. Thanks for your advise!
Thanks for your kind words @GarfieldModular! I'm pleased that the music didn't out stay it's welcome. I've just read through a couple of your Doepfer Review Reports - great job! You have obviously put in a huge amount of time and energy into these and they are really informative. Nice :)
Create a public post on a public forum. It should be a single sentence with no apparent relation to anything else on the website.
Make sure your post looks weird, and don't ever explain anything.
Complain about other people commenting on your terrible post, throw in a few nonsensical statements like "I have a vision" or "this is my way" to antagonize people trying to make sense but again - don't explain or address any of the arguments directly, make it look like you don't really understand what you're talking about.
Bonus points for weird capitalization, grammar mistakes, logic fails, anything that a regular person would find mildly disturbing or offensive, you're here to make them lose their cool.
Watch as your victims waste perfectly good time trying to understand your nonsense and convince you to use your brains. Fools.
Congratulations, you have just completed our 5 steps program to become a forum troll.
To the general public: Please don't feed the trolls ;-)
I like the music, and I like the videos (this one quite a lot actually) but I think I would like the video more without the music What can I say, everyone's a critic :)
-- the-erc
Yeah, the music does get in the way, but considering this was a failed fishing trip, it turned out okay.
I like the music, and I like the videos (this one quite a lot actually) but I think I would like the video more without the music What can I say, everyone's a critic :)
I should clarify, I'm not just looking to make octave sound dissonant, I'm looking to synthesize sounds that will sound good in any tuning, which means it would be best to synthesize them at the Spectra level. Other than this Harmonic Shift Oscillator, I assume that an appropriate module would probably be an FM or Additive synth/oscillator.
Hi, I'd like to work with a module that has inharmonic (Non integer) partials. So far it looks like a module close to what I'm looking for is the Harmonic Shift Oscillator by New System Instruments. I'm not sure if it does exactly what I want, but if I understand the module correctly It has a Harmonic Shift knob that alters how spread the partials are. I'm trying to replicate the results in this video (which are in turn from the book Tuning Timbre Spectrum Scales)
Also fun bonus fact: The idea that consonance is based on simple integer ratios is a pure misconception! That's exciting if you ask me (see video).
Hey all, really excited to be getting into analog and modular after many years working in largely in DAWs as an experimental music hobbyist, because like many, all my initial experiences fiddling around with music and noise-making were analog. Feels great to get back to manipulating sound so directly. I finally have my first skiff set up, but I figured this might also be a place to share my compilation "Sorceress" of my past work, which has been free for a while in both truncated and extended versions on my website. Over the past year I compiled about 235 tracks I had laying around -- some on old cassettes, some on various PC hard-drives, some on CDRs -- for personal archival. Then I put together I think 50 of them for the purposes of a compilation called Sorceress and made it available on my website's blog, with a roughly 20 track version you can stream directly from the site. Been meaning to upload it to one of my Soundcloud accounts, where I have other unrelated material from recent years, but I don't think I ever got around to that.
The content is a pretty wide gamut, with tracks recorded in 1996 all the way up to 2020. Here's the original blurb about it from the blogpost:
Edward Ewald . Sorceress
(Selected Tracks, 1996-2020)
In 1996, when I was 17, I began fiddling around with a Radio Shack 4-channel mixer, a boombox stereo, a Sony dual cassette deck, a microphone, and a cheap Yamaha keyboard. I had no idea what I was doing and no real musical ability, but I was getting into experimental and electronic music of various kinds, and the desire to do something creative with sound was absolutely overwhelming. So I patched together the little equipment I had on a large table in my family's basement, and set to making a variety of music and noise. The first real "track" I recorded (retroactively titled "FM/AM" and appearing as track #47 on this comp) was basically just a meditative blend of FM and AM radio noise I'd taped, layered with some gentle keyboard drones. I received some positive feedback on the effort from a friend who was into ambient music, and I pressed on with more ambition.
By '97 I was listening to a lot of Aphex Twin and Squarepusher, and I wanted to make something with the rapid, chaotic percussion they tended to employ. I had no idea how to use computers to make music yet, no drum machine, no FX machines -- nothing that would be of any real use to emulating their style of music. So I improvised by simply recording very, very slowly played layers of percussion, and layering them atop each other (via cassette) piece by piece, with layers of melody woven in every other pass or so. I liked things to sound a bit strange, so I did a lot of ... creative EQ-ing, let's say ... and when I felt I had enough, I would dub the resulting, intentionally super-slow mix from one cassette to another at double-speed on the dual cassette deck, while recording the output to a third cassette. This double-speed recording would either become the final mix, or a pre-final mix that I would then mix together with another layer or two of non-sped-up material.
The results were certainly not what I would call objectively good -- I wasn't even using a metronome, and I have a terrible sense of rhythm -- but they were certainly interesting, and I still enjoy some of these wonky little homespun efforts to this day. There is a 2x album on Bandcamp called "Mother's Basement," somewhere, and that is the most comprehensive collection of this specific early period of music-making that I have organized. But a few tracks from that initial era appear here also -- primarily "Falcons" (track 33), and "The Mack" (track 24). "Pac-Man," "Energy Theme," "My Ghetto Bitch, Yo," "Bryan Was a Warm Sun," and of course "FM/AM" are also from this same general very early period. ("Keyboard Music Demo Track 1," while created much later, was also recorded using the same lo-fi, cassette-based mixing method I'd used in '96, as well as the same keyboard -- it was part of a nostalgic attempt to revisit that early process).
In 1998 I'd finally transition to making music on a computer, using a very cheap off-brand DAW called Digital Orchestrator. It crashed often, my grasp of MIDI and mixing principles were poor, and it was years before I realized something as simple as the fact that I could set the sample rate to something higher than 22,500. Many tracks from this era are rather tedious; some have been lost, some I keep ambivalently shelved; but, there are nevertheless more than a few tracks from this era that I still enjoy, too. Of this compilation, tracks from that period would include "Nighthawk," "Leap Frog," "Gloomy Firecracker," "In the Beginning," "Ghost of Memory," "Ghost of Hydrogen," and a personal favorite, "Your Heart is Also Here," which for me subjectively captures the emotional atmosphere of my early twenties in a very personal way. The rest of the tracks range from the mid-aughts all the way up to 2019. I think the most recent track in this compilation is probably "Water Spirit (2nd movement)" from an abandoned ambient EP I was working on a little in 2019. The songs featuring the slightly sped-up/pitch-shifted vocals -- "Princess," "Bill & Sue," "Phantoms," "Pitchforks" and "Magic Trick" -- were supposed to be tracks for a demo album I was putting together called "Suicide Songs," sometime around 2015. "Shortcuts," "Like Magic," "Slice of Night," and the partial "Lady in Red" cover are also from this general period. I know I have a lousy singing voice -- for some reason speeding it up makes it slightly more palatable for me. It gives me permission to not take it very seriously, I suppose, and I've always just enjoyed the slightly weird effect of it (cf. the much, much older "Bryan Was a Warm Sun," which was made with a microcassette recorder microphone only).
Anyway -- recently I set to organizing and revisiting some of my large, disheveled archive, and managed to compile 235 tracks. This was by no means an exhaustive count, just the ones I was able to easily identify and catalog with the time I had. Of those 235, I've winnowed it down to a selection of 50 for the purposes of this 3 hour compilation.
I was listening at your track and "suddenly" I was... I was... disturbed and... didn't know what was going on?! What happened? Your track ended and I missed it, this track of yours is so great, so joyful to listen at, this could be double length for me and I still would feel it's too short.
I really enjoyed listening at your music, it's relaxing as well as it inspires me while I was writing and being busy with one of my review reports :-) So thank you very much for this joyful moment and kind regards, Garfield.
P.S.: Hitting the play button again, I want this again, again, and again ;-)
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Lovely video as always, I still love the river where you live nearby, beautiful to watch your videos. At about 1:30+ what happened with that road that seems to disappear in the river? Or is that on purpose?
Nice AE system music accomplishes the video, great! :-) Thank you very much for sharing this and kind regards, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
-- Hence if you haven't already committed to a case, I suggest you view more other small to mid-size builds to try to zero in on sizing that gives the right balance of small yet inspiring for you.
-- nickgreenberg
Thanks for the good points. This actually hit the nail on the head. I've been mulling over a suitable case for a while and going between this palette or a 6U Frap Tools plus -setup and haven't made a solid decision yet.
It's difficult, for instance 6U 84hp system would open a lot of possibilities to have an additional envelope/LFO and VCA. In this current plan if I want to use Just Friends as a voice I'm lacking an envelope (thus there are a couple 1U LPGs to control voices with just triggers, but it's less flexible). But I'm kind of worried to open the floodgates with a bigger system and hoarding too much everything to keep the system coherent and mobile.
-- the "big rack / small rack" setup IMO works really well. Big rack gives big possibilities; small rack is portable and helps focus. I've heard a bunch of other people (incl. working musicians) take a similar approach. So you have a lot of company in this line of thinking.
-- that said, the 104hp setup above MAY be too confining? For me a 9U 84HP setup (Deopfer case) is very portable, small enough to be focused, but big enough to give some room for a variety of modules. Your question about Sarajewo and "hard to justify the space in such a tight setup" may indicate your build would be better served with a bigger case? Hence if you haven't already committed to a case, I suggest you view more other small to mid-size builds to try to zero in on sizing that gives the right balance of small yet inspiring for you.
I've read the manual and I can save patterns no problem, but I can't seem to change bank. It's possible that there's an issue with my module, but I get the feeling like I might just be doing something wrong.
Let's say I've programmed gates 1, 2, and 3 to trigger drum samples. To save that whole pattern (is that the right term for the series of sequences being sent by multiple gates?), do I need to save each track/gate individually? Or is there a way to save the entire pattern by selecting Save and Gate 1 only?
When I hold down the bank button and press another gate button, the light changes while bank is held down and it appears to me that I'm in another bank. But the pattern is the same. If I save something there, it follows me to each new bank. if I change bank and delete the pattern, I can't find it by going back to the previous bank.
I think I'm just making a silly mistake somewhere, I know that this is a dumb question and people typically figure this out from the manual, but I'm just having trouble getting it. If anyone could help me out I'd really appreciate it!
And, yeah I know that too when recording. I also get in this flow every time. I never look at a clock when recording, but usually I always end up at around 9 Minutes :-)
Hey. Here is a new track I recorded live on my modular - maybe a bit over long?.....but you know how it is when you get in that synth zone! Time seems to disappear in to the aether.
Mangu solved the issue.
You must power on the Sweet Sixteen after the Disting.
I've plugged it on another psu.
You can try this kind of thing: https://www.modularsquare.com/shop/wmd/soft-start/
It's another solution.
I didn't try it.
Pull up enabled on the Sweet sixteen and disabled on the Disting.
I was nervous for my first time buying throw modulargrid, but thanks to @Grooveserfer patient and guidance everything went perfect. Finally got the erica synths sample drum in perfect conditions! Would definitely buy from him again!
🤓
TL:DR would you replace Xaoc Sarajewo with something? Comments about the rack?
For some time now, I've felt my larger modular system gives me so much possibilities to tweak sounds in all sort of manners that it's hard not to get stuck minding over the minute details of a patch. This coincides with a feeling that it would be nice to have a more portable system.
Summer's on it's way and I'm moving temporarily to a much smaller apartment, and I've been devising a smaller 104hp setup to keep me company. The goal of this rack is to have a self-contained system with depth to sequence voices in unorthodox manner, for instance, I love just intonation tuning, so a sequencer / voices with easily changeable temperament is a must.
Some notes about the setup: ER-301 is used as a flexible mixer with some DSP applications. Just Friends used interchangeably as an envelope / LFO / or additional voices when I need them. 1U Multi-FX is only included because the plate reverb emulation is one of the best I have heard, instant ambience generator.
What I'm mostly unsure about and would love feedback about is the Xaoc Sarajewo. I've heard so much great things about it, but it's hard to justify the space in such a tight setup for a mono delay. Any other clock syncable delays that would fit? Chronoblob 2? Experiences with one or both of them you can share?
Apparent issues? I see zero with this build because none of you know what equipment I have nor my vision, I didn't ask for anyone to comment so I will make them all private from now on. You apparently got nothing better to do then to talk crap of other people's designs you know nothin about on a Saturday, so yes Trolls. And By the way everything you complained about it is in the rig if you looked harder.
Here's my own attempt. Many ideas stolen from @troux.
Mixing solution :
SSF Vortices is the main mixer, which is stereo. the main outs go into the MSCL (bus compressor) and then the Isolater for output.
The four non-kick voices (BIA, Entity, Hats, Disting) get high passed by the Shakmat Hi-Pass and then multed into the Vortices' mono inputs, and also the two 2hp mixers (which are effects sends).
The white 2hp mix goes to FX Aid for delay/reverb/etc and comes back to a stereo in on Vortices
The black 2hp mix goes to the Kith Ruina for distortion and comes back via one of the stereo ins on Vortices (as mono). Not sure about this... maybe not filthy enough.
The Kickall goes into the remaining stereo in of Vortices, (again as mono).
It's a bit perverse to use the stereo inputs for the things which I want dead centre but it makes sense.
Non-mixing additions :
extra power!
more passive switches
I dropped the Takaab SMIX to make space.
I have tried to think about the cable routing, but there's only so much you can do with so much packed into such a small space. And of course I have no EQ anywhere which is not ideal. I was also considering a build around the Befaco Hexmix but, being that bit bigger, it makes doing anything sensible with the effects quite difficult.
@troux@garfield -- I think I will buy a PSU3 from Doepfer and swap out the PSU2. It seems to be pretty easy. But as it happens I have a spare "rack-wart" power module lying around that I can use to tide me over until then.
I've been told by a representative of Cre8Audio that the following tools will work to remove the existing nuts on my NiftyCase :
Philmore NT500
Xicon 382-0006
Can anyone confirm this ? Is there a standard knurled nut bit set available anywhere ? Part numbers, source, weblink, etc ... ?
Thanks in advance.
I'd rather have a bottle in front of me than a frontal labotomy
Wowzer Lugia this was a super deep treatise on generative music and synths! I'd love to see a patch guide example to help budding self generative acolytes like myself apply this to our modular systems. My large system has plenty of LFO, VCAs, sequencers and logic modules and even a comparator now. I hope someday to see a book and video series on modular synthesis from you and I'd definitely buy it. I'm finding modules like Mutable Instruments Marbles, Acid Rain Maestro and WMD SSF Toolbox great items to help with self generative music creation on modular.
Yeah, as I look into it more (and now that I have my actual skiff today) I'm realizing I'm overworrying a bit. I know I'm a little out of my depth with the technical side of electronics, so I'm being super cautious in making sure I'm not overlooking something. Thanks for the link, I will indeed be bookmarking that.
