A Warning to all Conscious Beings,
Consists of 4 tracks.
Hitler torments the baby Jesus
A warning to all conscious beings
Address to the citizens of Muffwiggler
The slow beheading of Nelson Baboon
Use your mind as a fungicide
Rev. 2 is in the works. I hope to have it ready in a month or 2.
Wogglebug and Maths are at the heart of this patch. Maths acts a bit like a 'bouncing ball' except that the Rene CV output provides time variation for each cyle. Maths outputs clock the Rene and provide envelopes for the sounds as well as strikes to the DPO and Optomix. The Wogglebug provides extra variation to the DPO and Echophon's pitch. The left Osc on the DPO in conjuction with the Optomix is set so that it has a conga type sound. Rene operates in snake mode. The Phonogene is used to capture some of the strikes from the DPO and play them back with a bit of variation courtesy of the CV out from the Rene altering it's varispeed.
Hello,
I just ordered my first eurorack modular.
For my purposes I wanted to get some different stuff then the moogs, oberheim, roland stuff I have now.
So the Mutable looked like a great oscillator f.or starters
I want to use the modular for weird, strange noises, not so for playable synth tones, I have enough hardware pieces for that job.
I am also looking for some sequencing stuff.
Maybe any one has some suggestions to add to my rack? Not to expensive, I'm little low on cash now :-)
For my first ever modular it was my Oscillator of choice. Having lots of old analog synths and more modern ones, I just wanted something a bit different then "just" an ordinary VCO. Looking forward patching it in!
No worries, here's how it works:
When you add a new module it will be public and viewable by everyone as default, unless you check the "Private" checkbox.
A private module can only be seen by you (and anyone who have added the module before it went private), so this is the way to go if you want to experiment.
I want to refer to the thread title and give you a general explanation, why limits are necessary.
Many users asked me why there is such a limit at all.
The main reason for the limitation is to ensure an acceptable server performance and keep the system save.
Without limits the consecutive duplication of huge racks could easily bring the server down.
This can happen without a bad purpose in mind but it also can be used in an attack scenario (This is no fantasy, it happened already).
The main problems:
I increased the limit for rows and columns many times and I think this is maxed out.
I know many of you guys will find this unacceptable so I am thinking about a solution.
PS. I would like to say that this is one of the coolest sites on the net, free too.
-- gwpt
The keyword here is free.
Will you guys freak out if I introduce some kind of paid account for "Pro" users, which will expand those limits?
This would solve some (but not all) problems and of course would give me some revenue.
What are your thoughts?
Best Knut
Beep, Bopp, Bleep: info@modulargrid.net
Hi,
I was wondering if it would be possible to increase the limit of 8 rows in the planner...
My total setup is larger than this, and I like to put all the modules, then duplicate that, to allocate out to my various racks.
pretty please? :)
Thanks
Guy
PS. I would like to say that this is one of the coolest sites on the net, free too. Amazing work, thanks guys :) :) :)
0ne of my favorite vco's - simple to dial in just what yer lQQking for - sounds farken great
i build my own frames for my euro stuff (wood) in very wide formats and found that if I leave out the mounting rails my Mobius height fits perfectly - i used it this way for a year before it got move to my rack bay
I forgot to post .. built mine bout a month ago - cool sequencer
- nice layout and display - i 1st had probs as i put in the analog switch chip in backwards but we
hen i discovered it and switched it the right way all wired great - amazed i didn't fry that chip!
Somehow the Core API Team of Chrome/Google decided to change the WebAudioAPI. This broke TrueGrid.
I am not angry , in fact they did some necessary refactoring of the code.
I tried to migrate all the changes and at least TrueGrid is working again.
And amazingly it also works in Firefox, now (well, kind off, but promising).
Btw, I played a bit with TrueGrid today and browsed through the patches and had a lot of fun.
Some of them are really nice!
Note to myself: I should definitely spend some time to improve this part of MG.
It had such a good start but stalled a bit ...
Beep, Bopp, Bleep: info@modulargrid.net
For those of you who experienced problems:
TrueGrid is working again.
Beep, Bopp, Bleep: info@modulargrid.net
Thanks! I'm hoping to have an album released soon - had it all arranged, but the guy who owns the label seems to have taken a bit of a sabbatical.
I love these tracks! The 10 tracks of "I fucked your mothers dog in hell" deserves to be released as an album.
Thanks for sharing
/KNYST
Please, the XR22 VCO module is not digital, it is analog!
-- Christian G
I have removed the digital tag.
solitud.de | YouTube | Soundcloud | Bandcamp
Please, the XR22 VCO module is not digital, it is analog!
Soundfiles:
http://www.cg-products.de/module/xr22_vco/
Say "thank you" to Mr. Günther. ;-) I found this today in SchneidersLaden.
i have waited for a FSK (Frequency Shift Keying) EURORACK for years !!! thanks !
6/5 for this one. What a blast the Trigger Riot is. Without the slightest hint of doubt the most fun "drum machine" I've used to date (and there's been a few). The experimentalist's dream, I'd say.
Doesn't ever let me down. An absolute breeze to program too, in my opinion, as it's all very logical. The only down side being that the space between the knobs and the cables on the right side is a bit small, but it's really nothing major.
top one most exp ones that we want second row are usure and wild card thrid row is cheapest and meant to bought in pairs
Definitely has some quirkyness. Reverb effect is cheesy. Has tendency to go into self oscillation. In-spite of all this, there are nice sweet spots.
added a second braids. this is going to be aweseome.. !
now i just need to get the ergonomics worked out.
fs: intellijel rubicon $265, dixie control $65
Verbos Amplitude & Tone Controller $220
These are prices shipped to the continental US. I pay fees.
This might very well be mine! Would be interested to hear from people who see things missing that they couldn't live without. Suggestions that keep within the idea of, "BuchlaSynthi," and stay within the dual 90hp size...
Scratch that. Found it. PEBKAC.
I searched before I added and didn't find it listed. Where is the other one?
This is easy to bend from the two right angle bends of the support, especially when it is full of cables (even short ones.) I have put some hard rubber down to support the base to minimize the stress and hopefully prolong it's life. It is functional, but I believe it is way overpriced for its poor design.
-- gonkulator
Think you could take a picture of the white mounting plate? It would serve well as a picture for the module entry.
Looks like something outta Indiana Jones! I love the visual style. I'm looking forward to more exciting modules from this maker.
Thanks for the warning. I was going to go for a couple of these, but I guess I should stick with Pomona cable hangers.
This is easy to bend from the two right angle bends of the support, especially when it is full of cables (even short ones.) I have put some hard rubber down to support the base to minimize the stress and hopefully prolong it's life. It is functional, but I believe it is way overpriced for its poor design.
Thanks for kind words!
My pleasure, best Knut
Beep, Bopp, Bleep: info@modulargrid.net
Thanks for reporting!
Yo, Knut!
The Update=>Screenshot function is no longer working.
I keep getting the message "Image not found," and the error:
Error: The requested address '/img/racks/modulargrid_??????.jpg' was not found on this server.
The Command Center => Update Screenshot Preview is also malfunctioning.
Something screwy with CakePHP?
-- Adminius
Screenshots are generated by a "headless XServer".
This Mofo likes to crash every once in a while, it's a bug since day one.
My professional solution so far is the IT Crowd approach: switch it off and on again.
There you go, works again :)
Beep, Bopp, Bleep: info@modulargrid.net
Yo, Knut!
The Update=>Screenshot function is no longer working.
I keep getting the message "Image not found," and the error:
Error: The requested address '/img/racks/modulargrid_??????.jpg' was not found on this server.
The Command Center => Update Screenshot Preview is also malfunctioning.
Something screwy with CakePHP?
As much as I like this product, it is not a module and should not belong here. Flagged as private.
-- modulargrid
My bad. It is mountable as a module. Removed flag.
Someone can upload a better "2D" image of this?
Beep, Bopp, Bleep: info@modulargrid.net
As much as I like this product, it is not a module and should not belong here. Flagged as private.
Beep, Bopp, Bleep: info@modulargrid.net
I am wondering if this setup would be good for one of my drone sets?
Right, that's the menu, I get it all the time both in Chrome and Safari. I'm also on iOS 7.1. I do press-and-hold for some time for the menu to appear, but that's to avoid other touch event side effects (such as dragging the wrong module). My racks were private when I noticed this, but I am not in a position to verify if this makes a difference. Good luck and thanks for digging in. Thanks as well for removing my fake rating.
It's basically the right-click menu. I activates on mobiles when you long-press a module ...
-- wiredearp
O.K., now I think I get what you mean. The menu which reads "Save image/Copy" ?
Strange thing: I can not reproduce it on my iPad (iOS 7.1). The contextual menu only shows up, when I am hovering about a module in a rack of an other user where I have no editing rights.
On my own racks I am not able to trigger the contextual menu (?).
Your code looks good, but I have to been able to reproduce the error. I will investigate further ...
Beep, Bopp, Bleep: info@modulargrid.net
Not sure what you mean with "contextmenu". If you mean this speech bubble thing with the specs:
You can click on the Popover on button above the rack to prevent the display of the popover.
It's basically the right-click menu. I activates on mobiles when you long-press a module, just like the popover, which it obscures. You can get around it if you drag really fast, but that usually just moves an unintended module. My standard procedure is to press a module, wait for the contextmenu to open, press somewhere else on the screen to close the contextmenu, then drag the module. I spend way more time on ModularGrid than I should already, so every second counts. I believe you can get around it by something like:
if(/Android|iPhone|iPad/i.test(navigator.userAgent)) {
window.addEventListener('DOMContentLoaded', function() {
document.querySelector('#rack').addEventListener('contextmenu', function(e) {
if(e.target.localName === 'img') {
e.preventDefault();
}
});
});
}
Thanks again for all the awesomeness.