There are some nice cases out there. Which case offers the most depth above PSU and bus board? Modules like uLFO have 60mm depth, but some cases like Pittsburgh only have 38mm.
Hi Vinnie_Lee,
the deepest I know of is this 19" frame: http://www.doepfer.de/home_d.htm.
140 mm usable depth where the bus boards are.
Going with custom frames similar to this (http://clicksclocks.de/904) you could go deeper if you wanted to.
BTW some modules are only like 20 mm. That's why I built my cardboard skiff case just 38 mm deep on the shallow side.
I find that more convenient than working an upright case.
(late wish to Santa: A 'sort by depth' feature in the module browser would be nice :)
Hi Vinnie_Lee,
the deepest I know of is this 19" frame: http://www.doepfer.de/home_d.htm.
140 mm usable depth where the bus boards are.
Going with custom frames similar to this (http://clicksclocks.de/904) you could go deeper if you wanted to.BTW some modules are only like 20 mm. That's why I built my cardboard skiff case just 38 mm deep on the shallow side.
I find that more convenient than working an upright case.(late wish to Santa: A 'sort by depth' feature in the module browser would be nice :)
-- wiggler55550
Thanks for the info!
I've been thinking, get a Doepfer plywood 9U case ($460),
or get a 12U mixer briefcase, and get a switching busboard and PSU from Intellijel or something(around $550), which offer more HPs and more juice, but I have to put them together myself...
