User Posts

Thanks @Sweelinck Its probably more acid trance than Techno but thats how techno was back then before Trance got all light and fluffy and more minimalist Detroit techno took over and made music just a touch more boring.
The bit at the end is another patch and uses the Error Instruments Soundscaper through a couple of Delays.

Cheers

A tweaked sequence which is pretty similar to the classic https://www.discogs.com/master/114137-Emmanuel-Top-Tone

Cheers

The AI is a great little Matrix mixer and an easy DIY build.
Great for using as an effects send or getting more modulation from sources you already have.

EDITED May 25th, 06:54

I've never been a fan of the rackbrute - don't like the design - and the power solution is m'eh - rackwart & all -
-- JimHowell1970

My experience of the Rackbrute wasn't good, Power module got so hot that is always smelled like melting plastic, sent it back, manufacturer repaired, lost confidence in the case and sold on. It even made my modules run hotter than my 2x TipTop UZeus power. Now I'm on Konstantlab power for my bigger case and my 2x small cases are on the uZeus and no overheating.

Not sure there is a such a thing as a proper mains powered 2hp module, though if you can power via USB then there is this from Rakits https://www.rakits.co.uk/product/go/ which might let you lighten the load on the Rackbrute.
-- wishbonebrewery

That would imply that my pc would need to be running as well.
Don't like that idea but thnx for the suggestion.

-- Chrissozz

That would imply that you need a Phone Charger Plug ;-) No computer needed, a computer would / could introduce a load of machine noise into your modular.

Cheers :)

STO into Veno then Monsoon Clouds and Mimeophon and Zverb.
Crackle from noise into VC T-Networks.
Sample of Thunder in the Sebsongs Sampler on look via a band pass filter.
Radio Music-flashed prok playing other samples with Sloths deciding when it comes and goes.
Bit of reverb & Feedback control of Clouds with the Transient Modules Joystick.
Marbles is in control, modulations mainly from Ochd & Expander.

Not sure there is a such a thing as a proper mains powered 2hp module, though if you can power via USB then there is this from Rakits https://www.rakits.co.uk/product/go/ which might let you lighten the load on the Rackbrute.

Nyx hasn't come for a Synth session for a while, its her on the mug too!

Cheers

Cheers Guys.

Here's a spot more madness!

I'd go as far to say the Veno Echo is amazing. It absolutly loves modulation.
And a combo of Veno and Mimeophon is even better.

Its quite a lot of fun.

2hp Bell for sound.
Befaco Burst for triggers and probability.
2hp ARP for Arpeggios.
Divkid / Instruo Ochd+ Expander for modulation.
Veno-Echo for delays and messing.
Monsoon Clouds for a bit of Reverb.

I predict everyone is going to want one of these.
Looks the perfect addition to a percussion rack or ambient with long samples.

Good stuff.

Good stuff.

No worries then, was just giving you an option seeing as there doesn't look to be what you are asking for.

Click the Data Sheet link below your rack, copy and paste the page into something.

Some effects?

assuming that you have no other gear doing sequencing, you have a couple of options:

Use the Edu sequencer as the main Triggers and Pitch sequencing.
Use the Turing Machine to send CV to control theFrequency on one of your Filters.

Or do the opposite ;-)

EDITED Apr 19th, 17:37

un-tick the 'Popover' switch above the rack.

Yep, thanks @JimHowell1970 this was my fear when there is only a tiny pot to work with.

Thought as much, thanks

Good reminder @Sweelinck I often think I'd like more noise and totally forget that Disting does it.

The Luddites will eventually smash it! ;-)
The machines are taking their jobs! You might even be an Ai !

Would I be annoyed by a 6hp Rings versus a Full size?
As in, are the tiny trim pots annoying to set and I'd be better off with the full size Rings?
Of course, 6hp is appealing for not taking up s much rack space!

Proper dreamy one that.

Can you log in on different browsers at the same time? Though I guess that will stop you copy/pasting.

just make one from the list of 'Popular Modules' on the main page. Not that it would make for a good rack, might look fancy :)

Good stuff, had a listen the other night.

With a bit of tinkering you can great an entire patch that runs from a noise source, if thats your thing.

I regularly put noise into a VCA and turn down the amplitude, feed that into the ADDAC T-Networks and you get a lovely grungy crackle, feed that Crackle into an Envelope Follower and you can get a Clock/Gate out of it along with an envelope slope.
Meaning you can adjust the VCA, the Envelope follower or the T-Networks and get subtle changes to the triggers you are getting.
Sloths is a great module As @geusensdriesmusic says, I'm currently using it to modulate Divkid Ochd.
Marbles might be a good starting point for a bunch of Triggers, Gates, V/oct and modulation (Just remember to modulate your Modulators).
2hp RND has planty of options for such a small module
Befaco Burst is good for triggers guided by probability
Noise Engineering Clep Diaz is a nice little LFO, Stepped and Stepped Random module that will keep in sync with your clocks.

Have you tried doing a Krell Patch?

Error Instruments make the Indian Reasonator, which you could think of a as a One-trick-Pony but I find it quite flexible for some background sound scapes. Filter it, combine it with Sine waves and wavefold it.

Thanks a lot guys :)
There is quite a bit of stereo filter reasonance in there too which is lots of fun.

Kinda weird, start listening about 1 minute in as it was recorded live. The Dual CS20 VCF from Cubusynth works a treat here with plenty of modulation thrown at it, modulation mostly comes from NLC Sloths driving the Divkid/Instruo Ochd, into some effects via Mimeophon & some granular action from Clouds.

EDITED Mar 19th, 07:38

Thanks, I'll check them out later.

Anyone got a sound example or vid of this module?

Nice work.

Unless you already have the Rackbrute, my experience with that case wasn't good and I ended up returning it even after they said they had fixed it. It got really really hot for me which wasn't happening with my TipTop uZeus power supply so the only thing I could think was it was the rackbrute power at fault. So hot it smelled like melting plastic all the time stinking the room out.

Now I run 2x TipTop uZeus for my small cases and some nice Konstantlab power for my main case.

They are a great module, great with the probability for introducing random triggers, something nice is to shoot the triggers to something like Rings or the 2hp Pluck or Bell via the 2hp Arp and Tune, Makes for some pretty results.

Too kind @the-erc for classic Hardfloor it needs Toms.

Cheers @Sweelinck :)

Cheers @Cem79

Sometimes I can play about making weird abstract noises but then you realise you have been neglecting a row of modules, so here's a bit of fun.
I probably need to get a 909 Ride Cymbal just to top this off...

Really nice work, kinda glitchy. Liking it.

Nice work.

Nice demo.
I never really drive the signals through my Vortices, I'll have to give it more experimentation.

Haha, yeah mind the wolves!!

Just did a thing by holding a Piezo onto my crappy soldering iron stand, scratching it with an allen key and sampling it in the SebSongs Sampler, I think it turned out kinda nice. NLC Sloths modulates Ochd, Ochd does stuff, then other stuff do other things, before 3 effects routs and a filter.

This may not be anything to do with what you are talking about but I have Pams as my main clock and the Midi out controlling my Beatstep pro, while playing i see the BPM change on the beatstep and can hear the slowdown in tempo. As far as i can see i do not have any Swing or probability set on the beatstep and I never have an issue with Pams swaying about as its rock solid.

Great set....

Now I don't know what type of transformers you are using or the electricity structure in your facilities, but I would unplug it and have it analyzed by a specialist.
-- GunnarWaage

The original Poster has left the building! You might want to scrap all that as it's Yesterday's news Today ;-)

@mattroix was just piggy-backing on this topic with a question.

It may be worth making a short video of the issues and sending it to Instruo, there email is in their T&Cs info@instruomodular.com

For me as a producer of beer we like to investigate any issues that get reported and react as best we can to resolve problems or indeed in some cases our due dilligence tells us we have done everything correct and the customer is doing something wrong, each case is tracked back to production records and staff consulted so that we can always improve and if needed adjust process to target consistency.
Thankfully problems are vanishingly rare but we still take the time to see if improvements can be made.