Dimensions
6 HP
50 mm deep
Current Draw
50 mA +12V
50 mA -12V
? mA 5V
Price
$180 Price in €

This Module is currently available.

USB/Midi-to-Sync Interface

Module A-190-8 is a Midi/USB to Sync interface.
The main application of the module is the control of clocked A-100 modules like sequencers (A-155), sequencer controllers (A-154), trigger divider (A-160 or A-163), trigger sequencer (A-161) and similar units. It may be used also to reset or sync LFOs (e.g. A-145, A-147, A-143-4) or to trigger envelope generators (A-140, A-141, A-143-1, A-143-2) with a fixed clock rate.

MIDI input and an USB input but a simultaneous use isn't possible.
There are five clock outputs with different divisions:

96: 96 pulses per bar = 24ppq (no division)
32: 32 pulses per bar = 8ppq (division by 3)
16: 16 pulses per bar = 4ppq (division by 6)
8: 8 pulses per bar = 2ppq (division by 12)
1: generates a impulse at the beginning of a new bar (division by 96)
(ppq=pulses per quarter note)
The outputs Start and Stop generate impulses at each MIDI start and MIDI stop command. At a MIDI start command that follows a stop command the reset output will generate an impulse.
The Wait function stops the analogue clock while MIDI clock is running and will re-start it at the beginning of the next bar. This funtion can be activated with the button or a control pulse.

http://www.doepfer.de/a1908.htm


Ø 3.55 (11 Votes) Average Rating
submitted Nov 27th 2012, 14:31 by The_Crooked_Man | last Change Dec 14th 2017, 17:02 by DenMartinus
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

Perfect CircuitDetroit ModularControlThree Wave MusicMidwest ModularNoisebug

Canada

Moog AudioNightlife Electronics

Australia

Found Sound

These merchants probably sell this module. Huh?