Hello! Thank you for the feedback. I’vehad such a hard time finding anyone near me to even talk modular. The spring reverb was a random choice because i had rented a MOOG from a loval shop that had a spring reverb in it (I think). I do think it was limiting and maybe not even useful in this set up. I swapped it out with the FX Aid. I swapped the passive mult for a buffered one by Erica Synths. I think that solved a problem or at least gained some functionality. I chose the LPG because it can be used as a VCA or VCF or BOTH.
It also has an envelope generator output for the decay if I understand it correctly. Though I do see the usefulness in a MMF and will do some reading in consideration of making a change there.
Heres a link to the updated layout.
I also included the specs below this for the niftykeyz if you cared to take a look at that.
Full size 49 key synth-action keybed with aftertouch
4x CV + gate outs - can be split by keyboard zone and used polyphonic or monophonic modes
Useable case area = 112hp for eurorack modules
Power output for modules
+12V - 1500mA
-12V - 1000mA
+5V - 1000mA
Multi-mode arpeggiator
Auto-chord function
Transpose function
Glide control
Swing control
Multi-mode LFO
Clock - internal and external with divider
2x buffered mults
Sustain pedal input controls MIDI and gates
Range of cv outs 1 through 4 = 0-10V
Voltage output gates 1 through 4 - off = 0 on = 5（off = 0 on = 4.65）
Voltage output modwheel/LFO = 1-10V switchable to 0-5V
Voltage output pitchwheel = 1-10V
Voltage output expression = 1-10V
Voltage output velocity = 1-10V switchable to 0-5V
Voltage output aftertouch = 1-10V switchable to 0-5V
Voltage output clock - off = 0 on = 5
Input voltage range of oscillator = 0-10V
Two volume controllable 1/4” ts mono outputs on its rear (mirrored 3.5mm outs on top)
Dedicated control for headphone out with 1/4” headphone jack on its rear
USB MIDI class-compliant - no drivers needed
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB