@JimHowell1970, true passive mults are what you want 99% of the time for those 1v/oct cases.
No - but I think it's just a mistake :-) passive mults are what you want 99% of the time for those NONE 1v/oct casesI have a few Noise Engineering modules on the way and since these are sensitive to modulation, would passive mults be enough to tame these for modulation purposes say if I feed an LFO into them? I did take your advice from earlier and order a Kinks and Links as well as larger hex VCA for the second case. Now I need the sequential switch, clock, and logic modules. I figure with the four VCOs and 12 VCAs that should cover that area for now in both cases. I will get these additional tools on Black Friday sale.
-- sacguy71
mults will not tame anything!!!
they make copies - that's all
attenuators are what you are looking for for taming modulation - passive ones work fine - I use 2hp trim modules
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities