Module is available as a DIY project only.
This Module is currently available.
Cascading Utility Mixer
Description
The t04 CAS is an updated design of the classic Fonitronik Cascade module – a 4HP DIY Eurorack triple Attenuverter with mixed cascading output normalisation.
CAS has 3 channels of attenuvertion with bicolor LED indicators and the option to add up to 2 x gain of the original signal per channel. This allows for mixing, boosting, attenuating and/or inverting any incoming signal. The input of each channel is normalled to a +5V voltage source, allowing for each channel to be used as an offset/mactro control when the input is unpatched.
There are two modes of mixing the three channels, the mode is set via a jumper on the back of the module. In both modes, patching from the output of channel 1 or 2 removes the respective channel from the mix:
CASCADE MODE: With this setting, the output of channel 1 is mixed into channel 2 (as long as no cable is patched into output 1), and the output of channel 2 is mixed into channel 3 (as long as no cable is patched into output 2).
PARALLEL MODE: In this mode, both of the outputs of channel 1 and channel 2 are mixed directly into channel 3 (as long as no cords are patched into the outputs of 1 and 2).
See the User Manual for more info and patch examples.
Features
Flexible mixing, attenuation and inversion of audio and control voltages
Output normalisation with Cascade or Parallel modes
Up to 2 x Gain boost on each channel
+-5 volt normalisation at each channel input.
Bipolar LEDs to indicate amplitude and polarity
You can never have enough mixing, atten, invert & offset!
Original design by Matthias @ Fonitronik
Specs:
Width: 4HP
Depth: 25mm (including power connector)
Power: +12V 23 mA, -12V 16 mA
Build Document | User Manual
