2 HP
35 mm deep
Current Draw
15 mA +12V
0 mA -12V
0 mA 5V
$69 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Gate / Trigger Generator

The SetonixSynth Detectorist is a 2hp Gate-to-Trigger-to-Gate module, designed to provide useful “duty cycle”-like behavior from any sharp rising edge input.

When triggered by either the Gate Input jack or Manual pushbutton, the Detectorist will produce an adjustable-length Pulse, spanning in length from 12 milliseconds - about 85 seconds over its three ranges. If the Detectorist is re-triggered while the Output is already active, the count will reset but the Output will remain active without dropping to zero, thus “tying” the pulses, or producing 100% duty cycle.

Technical Specifications (Eurorack standard)

Width: 2hp
Depth: 35mm
Peak Current Draw: 15mA @ +12V, 0mA @ -12V
Ranges (approximate):
-Short: 12ms - 1 second
-Medium: 100ms - 6.5 seconds
-Long: 1 second - 85 seconds


submitted Oct 18th 2023, 20:46 by breadman

1 Users are observing this