Dual channel oscilloscope, frequency meter and tuner
https://intellijel.com/shop/eurorack/1u/zeroscope-1u/
If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
The Zeroscope 1U is an adaptation of the 3U Zeroscope by VPME.DE
It features three modes;
* Scope — Standard graphical display, with time displayed on the X-axis & voltage displayed on the Y-axis.
* X-Y — Alternate graphical display with CH 1 driving the X-axis & CH 2 driving the Y-axis.
* Tune — Alphanumerical tuning display, which can be configured to show either Hz values or note names.
The Scope displays have adjustable display offset for each channel and an adjustable trigger threshold, while the tuner has options for reference pitch and average update speed.
The inputs are DC coupled and accept signals between -10V and +10V. The signal on the input is normalled to the output below; this allows you to monitor or tune a signal without a mult or re-patching.
• 16 HP 26 mm deep
Utility Tuner
Dusty Clouds black panel. Does not include original panel.
Found Sound Australia Pty Ltd.
110 Albert St
Brunswick East, VIC 3057
Australia
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.
