Envelope Follower, Gate Extractor and Rectifier
https://steadystatefate.com/products/detect-rx
If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
Module is in perfect working order.The Detect-Rx is a versatile envelope follower, voltage controlled comparator (gate extractor) and rectifier providing many useful prescriptions to fill in your modular needs.Functions:DETECT-R is the main input and provides an envelope output, rectified output and gate output simultaneously. If a second signal is also patched into the EXTRACT-R, it can be used separately.The top two controls and switch alter the response of the resultant envelope. Any signal level from LINE (-10dBv) up to modular (+/-5 to +/-10V) may be used.The FREQ switch selects the spectra in which the envelope will respond to dynamic changes from the input signal. SMOOTH adds an additional ripple smoothing level control and tracks the FREQ settingENV GAIN controls the level of the envelope and is capable of attenuation as well as a lot of gain for low level input signals and even guitars (some pre-gain may be required for certain guitar pickups)THRU provides a buffered copy of the input signal for easy patching of classic envelope follower applications and moreAn LED is provided for visual feedback of the envelope and peak level (clipping) indication. Some uses for the DETECT-R:Create envelopes that follow the input amplitude and frequency spectraSlew audio or control voltagesCreate a side chain envelopes for amplitude dynamicsEXTRACT-R is a voltage controlled comparator with three threshold selections; LINE level, 5V and 10V peak for various levels of control and response. The output gate is normalized into the DETECT-R input by default - providing a second method of producing an envelope from a gate rather than dynamic content.RANGE selects the maximum threshold level of the attenuator.THR CV is the input for dynamic voltage control of threshold.THRESHOLD works as the manual adjustment and as a CV attenuator when CV is utilized.An RGB LED is provided for visual feedback of the threshold range and gate activity.Some uses for the EXTRACT-R:Convert any signal into a gate or triggerCreate a delayed gate or trigger from a sloped waveform Create variable pulse waveforms -PWMConvert audio into a series of pulses for insane distortionConvert audio into pulses to modulate other parametersRECTIFIER (RECT) inverts negative voltages while leaving any positive signal unchanged.Some uses for the RECTIFIER:Convert bipolar signals into uni-polar positive signalsIntense second harmonic distortion of audioFrequency doubling of bipolar signals in general
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.