Argos Bleak

Description

Industrial Music Electronics Argos Bleak - 4 Channel Oscillator Controller and QuantizerFantastic module in great condition. Very flexible quantizer.If you have any questions, please get in touch. Reasonable offers are welcome.Postage includes insurance. International buyers please get in touch before buying just so I can double check postage quote.Information from Modular Grid;ARGOS BLEAK is a 4-channel oscillator controller. Two calibrated control voltage inputs are quantized, processed, and sent to four different destinations. Immediate control is given for octave shift, detune, slew limit, and internal vibrato on each channel, with the semitone offset for the channel programmable as part of a preset. This module was designed to facilitate musical cooperation between oscillator designs from different manufacturers and provide a central control for multi-oscillator performance techniques difficult to execute in realtime by manipulating patch cords and tuning knobs.ARGOS BLEAK is a quantizer that provides voltage precision over a handful of oscillators. Its main function is as the brain for quantization and tuning (coarse and fine) for up to four VCOs. Each of the four outputs has a dedicated vibrato LFO to prevent a quad LFO to be used in a patch toward something as little as vibrato. The Argos Bleak saves many settings for different configurations, even saving offsets on certain oscillators to provide chordal "presets." These presets can be clocked through by giving "chord changes". The Argos Bleak is a benevolent master control module.InputsThe two inputs accept 0-8VDC signals to be interpreted as 1 V/octave pitch CV. Each of the four output channels can use either input or some arithmetic combination thereof. The internal quantizer is similar to the quantizer from the Stillson Hammer Mark II. Select a scale root and a scale type (or none at all), and your input CV will be processed through this and sent to the four outputs. Input channel assignments may be swapped or otherwise rearranged in response to an external gate signal.The slew limiter may be routed before or after the quantizer. Routing it before the quantizer may lead to useful rhythmic offsets. You may select which channels influence the quantizer trigger output to fully exploit this effect in your patch. If a cable is patched into the slew gate input, the slew will not operate unless the gate is high. The internal vibrato generator has a master amplitude control for sending the modulation to all CV channels. The channels’ vibrato signals may differ in phase for thicker modulation.Chord ProcessorThe chord processor stores 32 presets of “chords”. A chord consists of the quantizer scale selection, the semitone offsets for each channel, slew limiter routing, and all other programmable parameters. Chords may be selected with the rotary encoder or with an external control voltage.Argos Bleak FeaturesScale quantization selection (similar to Stillson Hammer mkII, free selection of scale root and mode)Vibrato Generator (internally routed to all 4 channels using the mixer knobs) with frequency and amount controlGate control inputs: Quantizer trig, slew enable, input selection swap Chord preset storage (16 slots, stores semitone offset of each channel and other programmable settings)Chord selection CV inputQuantizer trigger output

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.