Dimensions
2 HP
Current Draw
Module does not draw current
Price
$12 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Specs are approved by the manufacturer

Do you like combining gates?

This is a 2HP passive gate combiner, simply 7 diodes and a 100k pull-down resistor. Feed it a bunch of gates and get them combined at the output. As it is passive there will be a 0.6V voltage drop to 4.4V but should be fine for 99% of Eurorack modules, which usually trigger on 0.5-1V signals. If that is a drama, install schottkys such as Tayda: A-6786.

Just make sure the end of the PCB, where the 100k is, goes at the bottom of the panel.

Anyway, this is probably one of the easiest NLC modules to build and a nice, gentle introduction to soldering smd.

https://www.nonlinearcircuits.com/modules/p/gator


submitted Aug 14th, 06:13 by AndrewF | last Change Aug 14th, 06:13 by AndrewF
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

Australia

Found Sound

USA

Synthcube

These merchants probably sell this module. Huh?