AM1044 24dB Low Pass Filter

Dimensions
12 HP
Current Draw
? mA +12V
? mA -12V
? mA 5V
Price

This Module is currently available.

MG ID: 57820

Re-issue and expansion of the original AM8044 from 2013

This 12HP wide AM1044 is a re-issue and expansion of the original AM8044 from 2013, using the CoolAudio V2044A chip and some design ideas from the SSI2144 datasheet. The V2044A delivers a fantastic sounding transistor ladder filter, which we have added some amazing Q compensation to.

The V2044A is a re-imagined SSM2044 chip which found its way into the various Korg synths like the Mono Poly in the 1980's. In 2013 I issued the AM8044 based around this chip, but its was a low volume run due to its scarcity. Fast forward 13 years and the V2044A chip is easy to source, plus some ideas in the SSI2144 datasheet about how to add Q compensation.

The V2044A chip creates a 24dB cascading ladder filter, with an extra OTA circuit providing Q compensation, which ensures no loss of bass response when Q is driven into self oscillation. The Q circuit also has a Q CV input (with an attenuator) for achieving variable feedback from a CV input. The self oscillation goes down to below 20Hz.

The module has a two way LED circuit which has a green LED to show normal signal levels and a red LED to show boosted levels. Subtle amber LEDs continuously light up the CV potentiometers.

CONTROLS
Three audio inputs (INA, INB, INC), with the first two having a volume control
Four CV inputs to the VCF (CV1, CV2. CV3, CV4), three with a level potentiometer
Large control knob for filter CUTOFF
Q is controlled via a dedicated RESONANCE potentiometer
Q CV input and level control
Two way switch (Q COMP) selects whether Q compensation is on or off
ARP 2500 style control knobs

CONNECTIONS
There are nine 3.5 mm jack sockets on the anodised aluminium front panel:
IN 1, 2 & 3 - audio signal inputs with individual level control
CV 1, 2, 3 & 4 - 1V/octave control voltage inputs for filter cutoff
QCV - control signal for adjusting resonance
OUTPUT - audio signal output

The module comes with a set of M3 mounting screws and washers, and a standard 10 to 16-way Doepfer power cable.

https://www.amsynthstore.co.uk/product/am1044


submitted Apr 15th, 04:30 by Sapiano | last Change Apr 15th, 10:48 by Sapiano

Marketplace sell and buy used modules

1 Users are observing this

USA

SynthcubeThree Wave Music

These merchants probably sell this module. Huh?


Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.