visual pattern generator / visualizer

Install Discoball into your synth rack and synk with your music!
This is visual pattern generator
It features a large round 70mm screen, 11 algorithms/presets and a lot of LED-s!
Each preset offers 8 vibrant color options, including multicolor and dynamic changing modes.
Most importantly plug in your gate/trigger signal and watch your music sync with the visuals!

Presets:
Discoball: Dots appear randomly across the screen.
Pulse generates temporarily mode flashing leds.

Snowflake: Randomly generated images appear on screen.
Pulse generates a new image.

Lightspeed: Like being in a spaceship, watching stars fly past.
Lighting dots appear from the center and move toward the edges.
Pulse generates new dot

Random Animations: Six different animations cycle through.
Pulse triggers a new animation.

Half Circles: A half-circle appears and rotates.
Pulse creates a new half circle.

Circles: A circle appears and fades away.
Pulse generates a new circle.

Molecule: A dot moves continuously around the screen.
Pulse changes its trajectory.

Dots and dont's: Sometimes there is dot and sometimes there is not
Pulse generates new sequence

Impulse: A filled circle flashes on screen and disappears.
Pulse creates a new one.

Paranka: A multicolor wheel fills the screen.
Color options adjust how quickly the colors change.
changes the color

Goa: The screen explodes with wild, shifting colors.
Color options adjust the speed of the changes.
changes the color

Specifications:

Module height: 3U
Module width: 16 HP (80 mm)
Screen diameter: 70 mm
Presets: 11
Color options: 8 (each preset slightly different)
Sync pulse: rising edge 5v
max PPM: 150 (reading time around 170ms, can skip some shorter pulses)
Connector: IDC 10-pin Eurorack standard
Input voltage: 12v
Operating voltage: 5v

Power consumption:
To drive all those LEDs, this module uses more power than typical Eurorack modules:
Min brightness, minimum LEDs: 40 mA
Max brightness, maximum LEDs: 450 mA
Typical use: In a room with no sunlight, around 100 mA.

Please use caution
The temperature may rise significantly at higher brightness settings. Make sure your Eurorack case has adequate ventilation openings to allow proper airflow.
Please do not leave the product unattended while it is powered on.
Also watching it in a dark room may cause eye strain or discomfort.

This is a visualizer only!
It does not produce or process audio in any way.

More: https://koplielektroonika.ee/koduleht-disocoball.html

https://koplielektroonika.ee/koduleht-disocoball.html