Analog Delay +

Analog Delay 8HP Tap tempo sync BBD

The Analog Delay+ is our most advanced BBD delay module, featuring two V3205 chips providing a total of 8192 bucket brigade stages.

In normal operation, you can set delay times between 275ms and 30ms. However, the TAP/SYNC mode unlocks the full potential of the bucket brigade delay, allowing for much longer delay times. Keep in mind that increasing the delay time will introduce some degradation in audio quality and may cause noticeable clock noise.

The TAP/SYNC mode also activates the Beat Division Switches, which let you select from quarter, eighth, or sixteenth notes, as well as triplet and dotted note values for more rhythmic control.

The Delay Time CV Input and Delay Time CV Amount knob allow you to modulate the delay time using an external CV source. Holding down the TAP button switches the Delay Time CV to "beat division mode," enabling external control over the beat division settings.

For further modulation, the Analog Delay+ includes a Feedback CV Input that lets you control the feedback amount or its phase via an external CV source. We recommend trying a triangle VCO as a CV in for the phase mode to get ring mod like effects.

The module also features a Send/Return loop, which allows you to insert external effects or filters into the delay’s feedback path. The Send jack doubles as a Wet-Only Output, providing a dedicated signal path for processed audio.

We’ve designed the Feedback knob to reach infinite feedback when fully turned up, but a front-panel trim pot lets you easily adjust the feedback range to suit your preferences.

TECHNICAL SPECS:

• 8 hp (40.3 x 128.5mm panel size)

• Depth: 39mm

• +12V 46mA

• -12V 36mA

• 5V 0mA

https://www.voltatone.com/shop/analog-delay-1