No info about availability.
16-step trigger/gate sequencer
STP16 is an 16-step trigger/gate sequencer working in 2 modes:
16 step mode – In this mode STP16 uses “hocketing”, in our case it controls two channels using one 3-position switch. In the left position of switches 1-16, the trigger is sent to channel A (blue led), in the right – channel B (red led), the middle position – no signal. In this mode, only one of the channels plays during the step, which allows you to quickly create a rhythmic pattern from two instruments, an example can be a combination of open/closed hi-hats.
8 step mode – A 16-step sequence can be divided into two 8-step sequences using the 8/16 switch, in this case the toggles will work as in a classic sequencer, ON in the right position, OFF in the middle. The mode is convenient when you need corresponded steps of both channels to be played simultaneously. One of the channels can be used to reset the other, shortening the sequence.
The clock signal will be the same for both sequences, Out A will be responsible for the left channel, Out B – for the right.
Contols:
Gate/Trigger – In Gate mode STP16 operates with tied gate signal and can, for example, control a VCA.
Direction (UP/DOWN) – allows you to play the sequence in the reverse direction, works equally in 8 and 16 step modes.
CV controls:
Reset – returns the sequence to step number 1, works equally for both 8 and 16 steps.
Gate/Trig – changing between the modes
Each switch has 2 positions: trigger or tied gate. The Reset input allows you to make the sequence as short as you want. Ideal for creating and manipulating rhythmic sequences in live sets.
3 Users are observing this
These merchants probably sell this module. Huh?
