Dimensions
4 HP
46 mm deep
Current Draw
15 mA +12V
? mA -12V
? mA 5V
Price
$63 Price in €

This Module is currently available.

V-010 Voltage Limiter

Dual Safety voltage limiter module

From the top down:
Ch1 CV input + limit LEDs
Ch1 CV output (limited)
Ch2 CV input + limit LEDs
Ch2 CV output (limited)
Top limit voltage switch

This is the dual voltage limiter for safe patching Eurorack CV signals to an external guitar pedals / processors to avoid freezing pedal / processor (in worst case even burning input). Bottom voltage limit is always 0V, top voltage limit is switchable 3.3V / 3.0V / 5V (setting is common for both channels). If input signal reaches limits set (0V and top voltage) it will be held at limit (shown on LEDs). Input signal should be scaled somehow before reaching V-010, say U-012 Dual attenuverter can be used as input module (CV scaling, inversion and DC shift) to modify almost any signal into range required by pedal / processor.

Width: 4TE/ 4HP/ 20mm.
Depth: 46mm /1,8″ max.
Current: 15mA max.
Power cable included.

http://ladik.ladik.eu/?page_id=3664


submitted Apr 8th, 00:16 by circuitburst | last Change Apr 8th, 17:47 by circuitburst

1 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.