Available as an assembled Module and as a DIY project.
This Module is currently available.
Manual and CV Controlled Gate Randomizer
Holmes Modular Gate Crasher is an alternate panel and firmware for Holmes Modular Centipedes which may be found here: https://www.modulargrid.net/e/modules/view/43236
Gate Crasher is a module that combines two square wave oscilators into one output. This output is then used to extract weird and randomized gate sequences from the two oscilators. You can manually control the frequency of both oscilators as well as use other modules to control the oscilator frequencies with CV. There is also an enable input and a manual button to enable and disable the Gate Crasher to get the randomized gates at exactly the time and place you need them. You can use the module as a live perfomance instrument or let the robots do the work!
When you need your gates to be unstable at the right place and time, this is the module. The more you modulate it, the more destabilized it becomes. In this way you can get predictable instability. The module has "PSI Either Way" power input bridge rectifier so you can plug the power cable in either way without worry of a short.
These modules are built on a small run/boutique basis and will only be in stock for purchase from the original builder for a limited amount of time.
You can buy Gate Crasher assembled or download the files to make them yourself here https://github.com/caseyjholmes/Centipedes_Gate_Crasher
Buy on Ebay with confidence from a 100% feedback seller of 20 years: https://www.ebay.com/usr/noisypeopleupstairs?_trksid=p2047675.m3561.l2559
Join the Holmes Modular Facebook Group for more info!
https://www.facebook.com/groups/1209863649893092
