Dimensions
22 HP
Current Draw
? mA +12V
? mA -12V
0 mA 5V
Price
$49 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Vocoder

This module is a 22HP 10 channel vocoder based on the Syntovox 222. I own a 222 and have always been impressed with the sound and elegant design, so it was an easy choice of where to start.

The initial design for this module was 42HP with all the fruit – variable envelope lengths, envelope outputs and inputs, filter outputs and inputs, pause stuffing, external noise input, separate carriers for odd/even channels, etc. and it sucked; way too finicky to use.

So I stripped it back to a more minimal version and am much happier with it.

For the Voice section, there is a TRS/mono 6.35mm input for mics, a stereo/mono 3.5mm input for line level sources and a synth level input.

The Carrier section has a synth level input only.

There is no voice/unvoiced switching. Noise from a transistor based source is mixed with the Carrier signal on channels 9 & 10. Pots can control the noise level and the colour (pink/white).

There are jacks for each frequency channel and the envelopes generated. You can also patch in signals to stimulate the carrier signal on the corresponding channel.

Please note - NLC no longer sells assembled modules but there are several builders around the world who build NLC modules to sell. Email NLC for the list

https://www.nonlinearcircuits.com/modules/p/mun


submitted Jun 28th 2023, 14:06 by AndrewF | last Change Jun 28th 2023, 17:30 by motorhead412

4 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

Australia

Found Sound

USA

Synthcube

These merchants probably sell this module. Huh?