16/32-Step Trigger Seqencer
S-161 Trig sequencer module for Eurorack / Doepfer A100 system.
Quite self-explanatory trigger sequencer, some hints about concept:
- top button above display – short push switches between pattern (P) and chain (CH) display, long press goes to setting menu
- pattern can be 2-16 step long in 16-step mode or 2-32 step long in 32-step mode (last parameter in menu – mode 16/32)
- patterns can be chained (by their numbers) on chain display
- in pattern – turn knob while pressed to draw or delete more steps in row
- chain is always played forward and can be repeated or stopped (one-shot play, then needs the reset to play again), “dot” is empty pattern
- “clk display” and “cursor display” parameters in menu are times is seconds, clock/cursor mark dissapears after this time to display clear pattern if there is no movement
- preloaded patterns are organized like “BD, SD, HH, perc” so patterns 1 and 5 are basic 8-beat BD, 9 and 13 16-beat BD
- there are 16 patterns and they can be chained to 16 different chains, so max. sequence length before repeat is 512 steps (32step in pattern * 16patterns in one chain)
Picture description (from the left): 16-step mode display, 32-step mode display, chain display, menu display
http://ladik.ladik.eu/wp-content/uploads/2022/11/DSC_0675_S-161_4.jpg
Settings menu description:
- pattern direction – forward, pendullum, pendullum w. first/last step repetition, random
- pattern length – 2-16 or 2-32 according to 16/32 mode, see below
- trig width – 1, 2, 5ms
- reset – stay, first, last
- clock dissapear time – 2, 5, 10, always on display (infinity)
- cursor dissapear time – 2, 5, 10, always on display (infinity)
- mode – 16, 32 step (big or small marks on pattern display)
Width: 4TE/ 4HP/ 20mm
Depth: 45mm /1,8″ max.
Current: 25mA
Power cable included
Available in four flavors:
- Silver panel / White display
- Silver panel / Blue display
- Black panel / White display
- Black panel / Blue display
http://ladik.ladik.eu/?page_id=3460
