This Module is discontinued.
Storage and recall module
The Storage Strip allows for saving and recalling settings within supported modules.
Mungo 0 series modules
WMD Sequential Switch Matrix.
Expert Sleepers disting mk4 and General CV
Future supported modules:
Make Noise CTRLSEL series and all Macro Machines modules
The Storage Strip replaces the functionality of the Mungo zoom switch with a 2 button system for Zoom In and Zoom Out.
Zoom In doubles as a save button. Pressing Zoom In along with a setting button saves to that location.
Zoom Out doubles as a bank selection. Pressing Zoom Out and then a setting button will change to that bank (1-4).
You can manually change through settings using the lower 4 buttons. There are 4 banks of 4 for 16 total settings.
To select clocking mode press both top buttons together.
There are 4 clocking modes: forward, reverse, pendulum and random. Clocking can be switched between 4 step and 16 step mode. All sequencing mode selection is saved to EEPROM so it is always recalled even after powering down your case.
34 Users are observing this
These merchants probably sell this module. Huh?
