Dimensions
8 HP
25 mm deep
Current Draw
40 mA +12V
32 mA -12V
? mA 5V
Price
$149 Price in €

This Module is discontinued.

Specs are approved by the manufacturer

Sequential Switch Matrix (SSM) Expander

The SSM Expand 8 HP module provides extended functionality of the SSM.

Gate/Trig: Gate (Green LED lit) provides 10V outputs for each routing button. It mirrors the routing shown by the SSM LEDs. Trig mode (Red LED lit) will output a trigger when a step (CV, Step/Gate or Reset) is taken. Pushing a routing button will not change the output thus providing synchronized triggers.

Trigger Length: CV and knob provide adjustable trigger length.

Retrig on Step: When on, gates and triggers will retrigger quickly when a step is taken.

Invert Behavior: When on, routings that are OFF will produce ON triggers or Gates.

DAC3/4: Two 4 bit DAC outputs that output a weighted 4 bit voltage between 0 and 5 volts. From routing columns 3 and 4.

Step: Outputs a trigger for each step, reset or CV change that is made to the SSM.

Installation: Connect the 20 pin ribbon cable to the GTExp header on the SSM, and the ToSSM connector on the Expand. Red Stripe Down.

Specs: 8 HP. 25mm Depth. 10V Gate Outputs. Current consumption is +40mA, -3mA. 12 month warranty.

http://www.wmdevices.com/ssm.php


Ø 4.88 (8 Votes) Average Rating
submitted Jan 15th 2014, 08:35 by WMD | last Change May 12th, 18:36 by WMD

18 Users are observing this