This Module is currently available.
Power module for Antonus Sidecar
The Antonus Sidecar has a high-quality power supply included, with stable power lines to drive the most sensitive analog modules that require stable and noise-free power.
For that reason the system consists of a powered distribution bus with 16 regulated sockets.
The connection is made directly to AC outlet and accepts from 100 to 240v without need of switch selector. We ensure that the equipment can work in any country and there is no need to carry with the external “brick” power supply. Only one “8” type power cable is required.
The power supply has protection against shorts and over power by switching off and rearm, without the need to change fuses. The power supply when detecting a bad power condition will enter protection mode and will be reactivated when the problem or the faulty module has been removed.
The front panel light indicators shows the status of the 3 power lines. In case of failure of any line we will see the corresponding channel light turn off or blink. In that moment recommend to turn off the system and find the module causing the fault. When the module or cable causing the fault is no longer present, the source is rearmed again and everything will work again.
In the power interface module we also have a USB socket available to power any device that is powered by 5volts via USB.
