S-260 6-to-2 ORer

logic OR module

S-260 is logic OR module, 6 inputs, 2 outputs. Every input can be routed to output A, output B, both outputs or none of outputs. Routing is set by three position switch for each input, “A” = signal goes to out A, “B” = signal goes to out B, mid position “X” can route input to both outputs or to none of outputs (=off). Meaning of mid “X” position can be set by button short press (for all inputs). Long button press switches gate and trig modes: in gate mode it works as usual logic OR (one lasting gate “covers” all other channel gates making steady output), in trig mode is short trigger generated everytime when input gate/trig begins (even when one channel is very long gate usualy “covering” other inputs). Lenght of trigger can be set to 2ms or 10ms by holding button for a while in trig mode.

http://ladik.ladik.eu/?page_id=2803