Dimensions
10 HP
25 mm deep
Current Draw
36 mA +12V
0 mA -12V
0 mA 5V
Price
$50 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Blinkenlights Polyrhythms

Clock divider and multiplier module with binary and multi base modes

Polyrhythms is a clock divider and multiplier module for Eurorack, with 12 simultaneous gate outputs: 6 divided and 6 multiplied.

  • 10HP wide
  • 25mm deep
  • +12V 36mA, -12V 0mA
  • choose between binary division / multiplication and what I call multi base: simultaneous outputs in base 2 (binary), base 3 (ternary), base 4 (quartenary), base 5 (quinary), base 6 (senary) and base 7 (septenary)
  • great for rhythm generation
  • great for audio rate division, creating harmonics from a base signal
  • reset gate input, and button
  • clock multiplier with 1000Hz resolution
  • Schmitt trigger inputs
  • All inputs and outputs tolerant of connection to +12V to -12V - will survive patching mishaps!
  • The simultaneous outputs would be perfect for rhythm generation, especially if further combined via logic modules etc. At audio rates, the binary division outputs 6 octaves below the clocked rate. In multi base mode, the module outputs harmonic undertones and overtones of the clocked rate.

The clock multiplier works best with lower clock frequencies, from LFO into the low audio range. It has a resolution of 1000Hz, which means that the highest frequency it can output is 500Hz.

https://www.tindie.com/products/nbirch/polyrhythms-kit-eurorack-clock-dividermultiplier/


submitted Aug 25th 2019, 20:15 by Haus_Sonsbeeck | last Change Feb 10th 2020, 08:43 by blinkenlights
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.