S-230

Shuffled grid

S-230 Shuffled grid module for Eurorack / Doepfer A100 system.

From the top down
left column:
clock input + LED
reset input + LED
setting button + 2 LEDs (short press sets trigger memory, long press sets trigger length)
retrig button + LED
swing knob + CV input jack
output jack + LED

right column:
four channel inputs and outputs with LEDs

S-230 module can add swing to your sequences according to swing button setting and CV input. Bottom output jack in left column provides modified (shuffled) clock. Same swing can be added to up four input triggers (right column). If trigger memory is off input channel signal must be present at moment of input clock to generate appropriate channel trig output (triggers are generated while input gate is on). If trigger memory is on, rising edges of input triggers (or gates) are memorized and appropriate output trig is generated in clock “grid” (regular if swing is set to zero or swinged according to swing setting). This allows generation of trigs aligned to clock (straight or shuffled) from uncorelated signals (say free running LFOs or something). Generated trigs are 1/2/5ms long (set by long button press, underlined). In retrig mode next trigger is generated (with next clock) if input lasts “on” even when clock ends. Input gates are converted to trigs according to trig len setting (long button press).

http://ladik.ladik.eu/?page_id=3041