BRIDGE

modular patchbay, 8-way connector bridge, multiple

The bigger your Eurorack case gets, the farther apart your modules end up. Your drums might sit on one side, while the sequencer is way over on the other. That usually means long, messy patch cables stretching across your system and blocking access to important controls. Flame’s Bridge modules offer an elegant solution to this all-too-common problem.

Bridge consists of two compact 2 HP modules, each with eight jacks. They’re internally connected via a generous 80 cm ribbon cable. The concept is simple: plug your source signal into one module, then use a short cable from the second module to reach your target. The long connection runs neatly behind the scenes, keeping your front panel clean and accessible.

The module also works as a multiple. The jacks are grouped, so you can send a signal to several destinations in your case without extra modules. Since it’s completely passive, Bridge requires no power — it’s purely a physical solution to a physical problem. That means you can focus on patching, not cable clutter. Clean!

Features:
• Two 2 HP modules with 8 jacks each
• Internally connected with an 80 cm ribbon cable
• Lets you “bridge” long distances in your case without messy front-panel cabling
• Works as a passive multiple for distributing signals
• No power required

https://schneidersladen.de/flame-bridge