Offer Details

Glis Mode (“glissando”) generates an auto-slide, adding a pitch slide when the input signal goes over a certain threshold (think: Hounds). The slide time is controlled by the param knob, which also selects between two slide shapes (basic or U-shaped).
Res Mode applies a resonant filter, selectable between lowpass and highpass with random modulation options. There's always a bit of resonance, but turning up the overtone knob adds even more, with feedback and oscillation at extreme high settings.

Vib Mode applies vibrato to the the wet signal. Setting the pitch knob to center bypasses the pitch shifter, allowing you to create chorus effects by blending the dry signal. It can even work as a random vibrato (tape warble) with the param knob at max.

The Pitch Magpie's Param knob is extremely feature packed. The knob is most dramatic on the Res mode: left of center, it controls the frequency of a lowpass filter; right of center, it controls the frequency of a highpass filter. But set the knob to minimum and it randomly modulates the frequency of the lowpass. As maximum, it does the same for the highpass.

The Pitch knob is quantized to the semitone, offering 31 distinct settings. For continuous pitch control (for whammy-style effects or microtonal adjustments), the expression input can be used.

As on the Oxford Drive and EQ-201, the footswitch is configured for “flexible” bypass. Tap the switch briefly to turn the pedal on and off. But hold down the footswitch, and it was act as a momentary switch, keeping the pedal active until you release it. This seems particularly useful with this pedal, especially on more chaotic settings. You can also alternate the default bypass state of the pedal by holding down the footswitch while plugging in the power jack.
• 66 mm wide 110 mm high
Chorus Digital Filter Multieffect PitchShifter
Velcro on base.
Found Sound Australia Pty Ltd.
110 Albert St
Brunswick East, VIC 3057
Australia