Offer Details

Voodoo Lab Pedal Power 2 Plus isolated pedal power supply in excellent condition.Used only for studio/desk use. Never mounted to a pedalboard. Fully functional and tested. Smoke-free home.No box or papers.Includes:Voodoo Lab Pedal Power 2 Plus unit IEC power cable 2 × Voodoo Lab PPL6-R 20" cables, 2.1mm right-angle barrel to 2.5mm right-angle barrel, reverse polarity / center-positive 2 × Voodoo Lab PPMIN-R 20" cables, 2.1mm straight barrel to 3.5mm mini plug, standard polarity / tip-positive 2 × Power-All C-GY battery snap jumper cables for pedals with battery-snap power only 3 × George L’s stress relief jackets I added small removable label stickers to mark the 100mA and 250mA outputs since this older PP2+ model does not label them that way on the top of the unit. The stickers can be removed easily with little to no residue. See photos for full condition details.This worked great in my setup for standard 9V pedals, vintage-style pedals, fuzzes, drives, distortions, and pedals that benefit from the battery SAG feature. Please check your pedal’s voltage, current draw, plug size, and polarity before buying. This power supply is not ideal for some modern high-current digital pedals that need more than 250mA from a single output.Specifications (Manufacturer)Input: IEC connector 120V 50/60Hz North America modelOutputs: 8 isolated output sections 5.5 × 2.1mm barrel connectors Center-negative standard output polarity Short-circuit protectedOutput Layout: Outputs 1-4: 9V or 12V 100mA eachOutputs 5-6: 9V 250mA each High-current outputs for compatible pedalsOutputs 7-8: 9V 100mA each SAG control available for simulating low battery voltageSpecial Features: Toroidal transformer Linear regulation DIP switches for 9V/12V selection on outputs 1-6 SAG controls for outputs 7-8 Rear courtesy AC outlet, 200 watts max 18V or 24V operation possible with optional voltage-doubler cablesDimensions: 6 × 3.4 × 1.8 inches 152 × 86 × 44 mmWeight: 2 lbs / 907 g