Offer Details

Sought out by musicians for almost two decades, the Diamond Compressor is the magical yellow box that started it all. This next generation Diamond Comp|EQ maintains the classic circuit architecture while increasing range and functionality. In addition to providing compression, the Diamond Comp|EQ is armed with their classic Tilt-EQ tone control and an active Mid Boost|Cut circuit set at the Tilt's center frequency. A new Attack toggle provides the original Diamond snappy response or a softer, more transparent compressor feel.Place the COMP|EQ either as the first pedal in your effect chain or very close to first for a traditional compression effects. Place it at the end of your chain and the COMP|EQ will act as a limiter. The COMP/EQ can also be used as a boost or tone shaping tool placed before or after drives & fuzzes with the COMP knob turned down low. Use it to even out your tone, add sustain, increase gain or carefully sculpt and EQ your signal. The Diamond COMP|EQ is the perfect mastering solution for your pedalboard.Main Features• Naturally smooth optical compression from a custom US-made Opto-Isolator• Mid boost and cut • Switchable Tilt EQ Fulcrum Frequency covering 250, 500 & 900 Hz +|- 6dB • Wide-ranging compression control and attack switch with LED indicator • Top-mounted jacks and soft touch relay switching • Burr Brown Integrated circuitsSpecificationsInput Impedance: > 1MΩOutput Impedance: < 10KΩSwitching: Relay True BypassPower Requirement: 9-18 VDC , negative tip, 2.1 mm barrel jack Current Draw @ 9 VDC: 22mATilt EQ Fulcrum Frequency: 250 / 500 / 900 Hz +|- 6 dBMid EQ Center Frequency: 800 Hz +|- 10 dBDimensions: 122 x 66.98 x 39.64mm (4.8 x 2.64 x 1.58")Weight: 280 g