If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
The new Iridium from Strymon gives you three iconic amplifiers, with nine impulse response speaker cabinets that complement the sound of the amp. Avoid the hassle of lugging around or miking amps. Place Iridium on your pedalboard and send gorgeous stereo amplifier tones, stunningly realistic cabs, and lush room ambience direct to a recording interface or PA. With Iridium, it’s easy to dial in a direct tone that will truly inspire and sound great whether you are monitoring through in-ears, floor wedges, reference monitors, or studio headphones.
Sound Design
Three amplifier models crafted using Matrix Modeling™, capturing the subtleties and unique tonal qualities of each amp
Round Amp – based on* a Fender® Deluxe Reverb®
Chime Amp – based on* the Brilliant channel of a Vox® AC30
Punch Amp – based on* a Marshall® Plexi (Super Lead model number 1959)
Nine Impulse Response speaker cabinets, 24bit / 96kHz 500ms
Stereo (three per amp type), pre-loaded with a curated set of IRs:
Deluxe Reverb 1×12″ by OwnHammer
Blues Junior® 1×12″ by CabIR
Vibrolux® 2×10″ by CabIR
AC30 2×12″AlNiCo by OwnHammer
1×12″ AlNiCo by Celestion®
Mesa® 4×12″ by Valhallir
GNR 4×12″ by OwnHammer
2×12″ Vintage 30 by Celestion
Marshall® 8×12″AlNiCo by CabIR
Load your own impulse responses using Strymon Impulse Manager software
Hybrid IR/algorithmic Room control with selectable small, medium, and
large rooms
Simple, responsive amp-style controls for Drive, Level, Bass, Middle,
and Treble
Premium stereo high impedance discrete JFET analogue front end with
up to 22dB of pure analogue gain
Ins, Outs, and Switches
Stereo Input (requires TRS adapter cable)
Stereo Output
Operates at instrument and Line Level input sources
Discrete transistor headphone amplifier
Expression pedal input provides seamless morphing between knob positions (Expression mode), or smooth pre/post volume control with logarithmic taper (Volume mode)
USB jack for connecting to Strymon Impulse Manager software
to add and edit your own speaker cabinet IRs
Compatible with Strymon MultiSwitch Plus for remote selection of up to 4 presets
Full featured MIDI control accessible via EXP Jack for remote parameter control and access to 300 preset locations (requires Strymon MIDI EXP cable or MIDI to TRS interface)
Audio Quality
Ultra-low noise, high performance 24-bit 96kHz A/D and D/A
converters provide uncompromising audio quality
Super high performance SHARC and ARM co-processors
32-bit floating point processing
Transparent Analogue Buffered Bypass
Strong and lightweight anodized black aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 500mA of current
Dimensions:
4.5″ deep x 4″ wide x 1.75″ tall
11.4 cm deep x 10.2 cm wide x 4.4 cm tall
Made in the USA.
• 102 mm wide 116 mm high
ModelingSimulation DualStereo
Includes original box and power supply.
Found Sound Australia Pty Ltd.
110 Albert St
Brunswick East, VIC 3057
Australia
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.
