Voco-Loco

Description

Radial Voco-Loco Microphone Effects Loop & Switcher for Guitar Effects[Mint]Add Guitar Effects to Your Voice or Acoustic Instrument!Radial's Voco-Loco is a foot-controlled effects loop that lets you integrate guitar effects pedals into your vocal or acoustic instrument sound. Whether you're a singer or horn player, it all starts with Voco-Loco's high-quality mic preamp. 2-band EQ lets you add warmth and shimmer. The signal then goes to your guitar pedals via a transformer-isolated hi-Z effects loop with individual send/receive controls. A tone control on the return path lets you tweak your effects, while the blend control lets you mix the original dry signal with your effects. Why should guitarists have all the fun? Upstage 'em, with Radial's Voco-Loco. Easy to use and get amazing resultsPlug your mic into the Voco-Loco's XLR jack, hook up your effects pedals using standard guitar cables, send the Voco-Loco output to your mixer, choose which effects you want on, and and you're ready to rock. You activate the loop using the footswitch on the right. The other footswitch does double-duty as either a mute switch to turn off your mic between sets - or as a 100%-wet switch when you don't want any of the dry signal. If you've ever plugged a mic straight into guitar FX pedals, you've likely been frustrated by sound-quality issues and lack of control. Voco-Loco changes all that by preserving the integrity of your original signal, while giving you the control you need over your effects. It's a brave new world!Radial Voco-Loco Features at a Glance: Effects Switcher for Voice or Instrument Add guitar effects pedals to vocals or instruments Create exciting and unique effects as you perform Turn on multiple effects using one footswitch High-quality mic preamp works with dynamic and condenser mics 2-band EQ (with high- and low-frequency shelving) lets you add warmth and shimmer Transformer-isolated hi-Z effects loop circuit with individual send/receive controls Built-in phantom power supplyMic Preamp and Effect Loop The Voco-Loco is a foot-controlled microphone preamp and effects loop switcher that enables a vocalist or acoustic instrumentalist to incorporate guitar effects pedals into their signal path. Add guitar effects pedals to vocal or instrument mics Create exciting and unique effects as you perform Turn on multiple effects with one footswitch Works with dynamic and condenser microphonesThe Radial Voco-Loco is in fact a studio quality preamp that has been carefully disguised as a foot pedal! One look at the linear frequency response, exceptional signal handling and low noise and you will recognize the studio quality that is built-in. This ensures that the dry microphone signal will be delivered to the PA system without distortion or artefact and faithfully reproduce the instrument or vocal without compromise. A carefully crafted 2-band EQ makes adjusting the tone effortless. Turning on the effects loop adds transformer isolation to reduce hum and buzz caused by ground loops, a common problem that plagues many pedal setups. Once the loop is brought back, a tone control lets you tame the effects signal and a dry-wet mix control lets you balance the signal to suit.*48 Volt Phantom PowerAlthough 48 volts is often specified, truth is, it is not always present or needed. In fact most condenser microphones are designed to work from 12 volts to 52 volts, many of which will also work on a simple 1.5 volt battery. The reason high voltage is used to charge condenser mics in PA systems is that in enables the condenser microphone to be positioned 200 meters (600 feet) away from the mixing console. Considering the Voco-Loco will likely be used near the musician with a 3 or 6 meter (10′ or 20′) mic cable, the high voltage is simply not needed. The Voco-Loco actually generates 40 volts phantom, not 48 volts. We chose to do this in order to reduce a power stage which could add noise. We have tested a wide range of popular stage and studio microphones and in all cases, the results were excellent.SpecificationsAudio circuit type:Integrated Op-Amp with Class A FET input circuitFrequency response:20Hz ~ 20kHzDynamic range:100dBGain:52dBClip Level:+15dBuTotal harmonic distortion:<0.005%Intermodulation Distortion:<0.005%Phase Deviation:8° @50HzInput Impedance:10K-Ohms, 100K (FX Loop)Output Impedance:300 Ohms, 3000 Ohms (FX Loop)Common Mode Rejection Ratio:-73dB @55HzEquivalent Input Noise:-120dBuNoise Floor:-85dBuMaximum Input:+10dBFeaturesInput pad, 180° polarity reverse, Ground lift, Effects LoopInput Connectors:XLR-FOutput Connectors:XLR-MGeneralConstruction:14 gauge steel chassis and outer shellPower:400mA, center positiveConditions:For use in dry locations only between 5°C and 40°C

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.