ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Got it.
Stereo overdrive/distortion
http://www.ehx.com/products/operation-overlord
Go to the Module Detail PageIf you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
With the Electro-Harmonix Operation Overlord Allied
Overdrive, whether you play guitar, bass, keyboards, or pretty much any
electronic instrument - dialing in great drive sounds is fast and foolproof.
Active 3-band EQ controls, footswitchable BOOST mode, and a dry blend provide
versatility for different tones and instruments. The OVERLORD also features two
independent distortion channels for use with stereo setups. Whatever your rig,
the Overlord is your indispensable ally.
Controls
The GAIN knob controls the amount of overdrive and distortion. As you turn GAIN
clockwise, the amount of input gain increases. The BOOST knob controls the
amount of extra gain fed into the main circuit when the BOOST and NORMAL modes
are engaged (both LEDs lit). As BOOST is turned clockwise, the amount of
distortion increases. The DRY knob mixes a clean unaltered signal with the
distortion produced by the OVERLORD. At the minimum position of the DRY knob,
the output is 100 percent overdrive effect, and at the maximum position, the
output is 100 percent clean. This function is useful for preserving the
harmonic integrity of your playing, which is especially useful for keyboards or
bass. For guitarists, this feature can be useful if you are stacking the
OVERLORD with other drive pedals, or are playing it through an overdriven
amplifier. The INPUT LVL switch controls the overall input level of your
instrument into the OVERLORD. Use it to set an appropriate gain level for a
variety of instruments. Set the switch to HI for low-level instruments, like a
single-coil guitar or vintage electric piano. Set the switch to NORM for
humbucker guitars and most modern keyboard workstations. Use the LO setting for
high-output instruments, like some synthesizers or boosted guitars. BASS Knob
provides active control of the level of the bass frequency range. MID Knob
provides active control of the level of the middle-frequency range. TREBLE Knob
gives active control of the level of the treble frequency range. VOL Knob
controls the overall volume output of the OVERLORD. As this knob is turned
clockwise, the output level increases. BYPASS Footswitch and red LED selects
whether the OVERLORD is engaged or in buffered bypass mode. When the effect is
engaged, the red LED will be lit. BOOST Footswitch and blue LED toggles Boost
mode on and off. When in Boost mode, the blue LED will be lit.
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.