Avalanche Run V2

Description

This is a used Earthquaker Devices Avalanche Run pedal. The item pictured is the one you will receive. It has been tested and gone over by the experts at our shop to ensure it's working properly and is free of issues, unless otherwise noted in this listing. Please read the description carefully and check over all photos for condition and wear. We do our best to describe all items as best as possible and note any wear we find, but please be considerate that it is a used piece and it won’t be perfect. We pack all items with care when shipping them. If you have any questions about this or any other piece of gear we have, please let us know and we'll be happy to help!-------------------------Condition Notes:- Condition: 8.5/10- Any wear of note: There's a couple of light scratches, but the pedal is still in overall amazing shape. And in full working order!- General notes: The Avalanche Run is such an incredible pedal! There's plenty of parameters you can tweak as well as different subdivisions on top. And you have the ability to assign the Expression jack to any of the 6 controls! These are just a few of the features that make this pedal capable of tons of dreamy and atmospheric trails and so much more!- Accessories included: Original box, bag, power supply, sticker and pictured literature only.--------------------------------------------------From Earthquaker Devices:Avalanche Run™Stereo Reverb & Delay with Tap TempoThe Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning...--------------------Controls1. Time: This controls the delay time and goes from 0ms to just under 2000ms.-----2. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.-----3. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.-----4. Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.-----5. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.Decay: Controls the reverb decay lengthR Mix: Controls the reverb mixTime: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.Repeats: Controls the delay repeatsD Mix: Controls the delay mixToggle: This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.-----6. Ratio Selector Switch: Selects delay subdivisions when time is set by the “Tap” switch.1/1: Quarter Note3/4: Dotted 8th2/3: Quarter Note Triplet1/2: 8th Note 1/3: 8th Note Triplet1/4: 16th Note-----7. Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.-----8. Toggle Switch (Mode Selector)Normal: This is the “standard” delay and reverb modeReverse: This is reverse delay mode with “standard” reverbSwell: This is the volume swell mode-----9. Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.--------------------Jacks & Signal PathTo Run MonoUse the left input and output only.-----To Run StereoUse both left and right inputs and outputs-----To Run Mono In and Stereo OutUse the left input and both left and right outputs--------------------TECH SPECSDimensions4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs-----Current Draw410 mA-----Input Impedance1 MΩ-----Output Impedance100 Ω-----S/N Ratio115dB typical-----24-bit 96kHz A/D & D/A converters-----All analog dry signal path-----All digital wet signal path with 20Hz – 20kHz frequency response-----Expression JackThe expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper. We recommend using a Moog expression pedal with the output adjustment knob all the way up. We cannot guarantee any other expression pedal to work with the Avalanche Run.-----Flexi-Switch® TechnologyThis device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.• For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.• For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.Since the switching is relay based, it requires power to pass signal.-----Power For best results, please use the included 9v center-negative 1-amp DC power supply.-----PCBs populated by a combination of artificial and human intelligence in the Akron, Ohio of America.-----Each and every Avalanche Run is completely assembled, wired and tested by total human beans in the tiny tundra town of Akron, Ohio.-----ArtworkArtwork by Matt Horak

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.