Doubledreamer

Description

Excellent Condition. Original box and case candy. Stock description below.Creamy tones, detailed response and gain-wide articulation, times two: The JAM Pedals Double Dreamer!Housing their two single overdrive units (the Tubedreamer and Lucydreamer) under one roof, the JAM Pedals Double Dreamer hosts three unique key features that offer maximum tone variety, practicality, and functionality in the smallest footprint possible while remaining 100% handmade just like all of their designs!The Tubedreamer (Left Side) is their take on the legendary 808 Tubescreamer! This is a carefully tuned midrange frequency register delivering a warm and rich overdriven sound through any amp. A pivotal difference between the Tubedreamer and other Tubescreamers is that JAM chooses to go with three diodes for asymmetrical clipping instead of symmetrical, enhancing the responsiveness of the pedal to fretting and picking nuances. Made with carbon comp resistors, the Tubedreamer employs the JRC4558D chip to deliver its classic sound, just like in the original, sought-after 808’s.The Lucydreamer (Right Side) is a Dry / Wet overdrive which has less of a mid-hump than their Tubedreamer and allows for more low end to come through. It can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp style break-up, all the way to full-bodied high-gain saturation with the assistance of the high-gain-stage footswitch. All of this occurs while effortlessly maintaining chord-voicing clarity! The “secret” chip it bases its sound on, along with its different clipping implementation compared to the Tubedreamer, allow the Lucydreamer to pair perfectly with the Tubedreamer adding layers of harmonic content on tap!Combine the two for new and exciting gain structures and assign the high-gain-stage footswitch to taste, making for up to six different gain-stages accessible in real time!JAM Pedals Double Dreamer Dual Overdrive Pedal FeaturesCONTROLSThe Double Dreamer features soft-click (relay) switching.Right footswitch engages the LucydreamerLeft footswitch engages the TubedreamerMiddle footswitch engages the high-gain function LEVEL (left) controls the Tubedreamer’s output levelTONE (left) adjusts the Tubedreamer’s toneGAIN (left) sets the Tubedreamer’s gain level3-way toggle-switch assigns the high-gain function as follows— Left assigns it to the Tubedreamer — Right assigns it to the Lucydreamer — Middle assigns it to bothMIX sets the blend ratio between the clean and overdriven signal for the LucydreamerLEVEL (right) controls the Lucydreamer’s output levelTONE (right) adjusts the Lucydreamer’s toneGAIN (right) sets the Lucydreamer’s gain levelLeft internal trimmer sets the high-gain stage output level for the Lucydreamer in relation to the low-gain-stageRight internal trimmer sets the high-gain stage output level for the TubeDreamer in relation to the low-gain-stageROUTING CONTROLSInternal dip-switches determine the Doubledreamer’s signal routingDefault routing (Series: input, Lucydreamer, Tubedreamer, output)2 left dip-switches UP & 2 right dip-switches DOWN — Independent routing (Y mode: input signal splits to both overdrive circuits)2 left dip switches DOWN & 2 right dip-switches UP. In order for this mode to work properly you will need two “Y” insert cables (stereo jack to two mono jacks)The IN jack becomes the Lucydreamer side’s breakout point (tip is input, ring is output) The OUT jack becomes the Tubedreamer breakout point (tip is output, ring is input)

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.