ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Got it.
Discrete Class-A germanium pre-amplifier
https://hudsonelectronicsuk.com/broadcast-dual-foot-switch/
Go to the Module Detail PageIf you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
BROADCASTTransformer coupled Class A Pre-amplifierThe Broadcast is a transformer coupled, discrete Class-A germanium pre-amplifier based on theclassic broadcast consoles of the 1960’s. In the low-gain setting, the Broadcast can covereverything from sparkling clean boost through to transparent overdrive, all with a healthy doseof volume available to push your amp. The Broadcast features a specially selected Triad steel-core transformer and a Germaniumtransistor. Advancing the gain on the Broadcast starts to saturate the transformer and thepedal’s discrete circuitry, giving rise to a gentle and dynamic compression coupled with subtlethickening of the mid-range. With the gain switch in the high setting and the trim controlwound up, the Broadcast starts to deliver heavier distorted sounds with a warm and fuzzy edgeto them. The Broadcast covers a wide range of driven and distorted tones whilst remainingdynamic, responding well to pick attack and the subtle nuances of every player. Features:Selected Germanium and Silicon transistorsTRIAD Magnetics steel-core transformerBI Technologies potentiometersLumberg jack sockets (rated for >5000 cycles)Heavy duty Alpha foot switches (wired for true bypass and rated for >30,000 cycles)Each and every Hudson Electronics pedal is built by hand onto a high-end PCB.Assembly, hand-wiring, testing and packaging is all done by Michael HudsonControls:Low Cut - Attenuates the low-end of the Broadcast. Since this control lies at the front end of theBroadcast’s circuitry, it is interactive with the gain controls.Gain Switch - Selects low or high gain mode.Gain Trim - Controls the gain level of the Broadcast. At higher settings the high-end of the signalis gently rolled off.Level - Controls the overall volume of the pedal.Power:The Broadcast requires a DC power supply unit (PSU) and can run at voltages between 9v and24v; running the Broadcast at voltages higher than 9v gives it more headroom, output level andclarity. This is great for use with bass or when using the Broadcast as a clean pre-amp boost.Please ensure your PSU can supply between 9v and 24, a minimum current of 20mA and has a2.1mm negative centre barrel plug. Any other type may damage your pedal. If you plan onsharing the same PSU with other pedals, we recommend using a PSU with isolated outputs, e.g.Voodoo Lab PP2.Current Draw: Typically less than 20mA Dimensions:105 x 120 x 60 mmFull two year Warranty
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.