Bass Overdrive
Go to the Module Detail PageIf you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
Letting go of my Darkglass Deluxe Vintage pedal. I've only used a handful of times. There are a few 'slight' nicks, and with this kind of finish it nearly impossible to keep it totally smooth - although I certainly tried. Velco is fresh.The pedal was purchased by me for a specific recording project and unfortunately I can only fit so many things in my office "recording studio". Original box, and I've added bubble wrap (the OG packaging was nothing in box besides manual and pedal, which seems a bit risky). It's boxed up and ready to go.I show pics of the packaging, as that is one of the things I pride myself in when selling.The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag.Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.Level: Sets the volume of the overdriven signal.Drive: Sets the amount of saturation in the overdriven signal.Grunt Switch: Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.Attack Switch: Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.This new addition helps to keep the treble portion of the signal under control, specially useful when playing with new strings and/or cabinets with tweeters!Low: +-12dB @ 100HzLow Mids Switch: This switch change the center frequency of the Low Mids from 1kHz to 500Hz.Low Mids: +-12dB @ 500HzHi Mids: +-12dB @ 1.5kHzHi Mids Switch: This switch change the center frequency of the Hi Mids from 3kHz to 1.5kHz.Treble: +-12dB @ 5kHzParallel Output: A passthrough for your input signal, useful for parallel processing.Direct Output: A balanced version of the 1/4” output, useful for running into PA’s or studio mixing consoles.
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.