Bassrig Super Vintage

Description

BassRig Super VintageI've purchased the Helix Floor and with IAN Martin Allison and Janek Gwizdala ( Just to name a Few) presets. This one is just sitting in the box not being used. I've never gigged with it. I believe since paying 500 for it I've used it maybe 2X. I marked it as Excellent b/c cause of the hair line scratches on the bottom and where I took off the velcro strips off.As questions or Make An Offer... The worst that can happen is I say No but you never know if you don't ask.Thanks Have a great day.THE WORLD’S FAVOURITE BASS AMP TONESThe BASSRIG Super Vintage is, quite simply, a complete vintage bass amp in a pedal. Based on the iconic Ampeg® SVT®, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you all the warmth, feel and drive of this classic bass rig in one small box.When the SVT® arrived on the scene in 1969, it rewrote the rulebook for purpose-built bass amplification. Thanks to its enormous power, deep bass, growling overdrive and purposeful control set, this tower of tone has remained the amp of choice for the most discerning bassists on the world’s biggest stages.With XLR and ¼” outputs, the BASSRIG Super Vintage will fit seamlessly into any signal chain, no matter how simple or complex, and our powerful Amp Out EQ tailors your sound to work with any amp, meaning you never have to compromise on tone.Complete valve amp-style signal path with dedicated class-A preamp and push-pull output stage, based on the Ampeg® SVT®Balanced DI output with analogue cabinet simulator based on the Ampeg® SVT® 8×10 cabinetReactive overdrive design simulates interaction between amp and speaker for realistic feel and authentic soundFull range of SVT® tones from clean to overdrivenPowerful tone-shaping Amp Out EQBlend control lets you mix your drive sound in parallel with your clean signalTour-grade, all-metal constructionHigh-impedance, buffered bypass with silent switchingDesigned and built in EnglandREAL AMP OVERDRIVEThe BASSRIG Super Vintage uses the same ground-breaking circuitry found in our other Analogue Amp Recreation pedals, replicating the entire signal path of the SVT® and delivering all the tone shaping, drive and character of this historic amp with stunning realism.In addition to all the familiar controls from the world’s favourite bass amp, we’ve added a BLEND knob, which mixes in some of your clean signal in parallel with the pedal’s emulated amp circuit. This control can add some subtle, low-end clarity or be used to create massive bi-amp-style overdrive tones.ANALOGUE CABINET SIMULATORThe balanced DI output on the BASSRIG Super Vintage is equipped with a painstakingly engineered, all-analogue simulation of Ampeg®’s famous 8×10 speaker cabinet – an essential part of this amp’s revered sound. Craft the perfect studio bass tone or run direct into the PA at gigs!The switch on the front panel lets you select whether the cabinet simulator is always active or only on when the pedal is engaged, meaning you can use the BASSRIG to add cabinet simulation to other pedals or keep an unaffected DI signal when the pedal is in bypass.POWERFUL AMP OUT EQBass amps come in so many different varieties and we wanted the BASSRIG Super Vintage to work with all of them. Our proprietary Amp Out EQ filter lets you tailor the output of the pedal so you never have to compromise on tone, keeping your sound consistent from amp to amp, gig to gig.Positioned after the drive circuit, the LF and HF trimmers adjust the low and high frequencies to give you the sound of a roaring vintage stack from even the tiniest combo, or tame unwanted boominess and brightness when using unfamiliar backline cabs. The HORN CUT switch instantly combats fizziness when using overdriven sounds with a tweeter-equipped cab, letting you keep your hi-fi clean tone and kick in proper, vintage overdrive.BUILT FOR THE ROADHoused in a hand polished, brushed stainless steel enclosure and furnished with aluminium controls, Neutrik® jack sockets and heavy-duty footswitch, the BASSRIG Super Vintage is equally at home on the road and in the studio.Specifications PHYSICALWeight: 846 g (1.86 lb)Dimensions: 146 × 93 × 65 mm (5.74 x 3.6 x 2.5 in.) L x W x H - Includes knobs and switchesELECTRICALInput Impedance: 1 MΩOutput Impedance: 500 ΩCurrent Draw: 150 mAPOWERPower Supply: 9V DC 2.1 mm centre-negativePlease note: the BASSRIG is powered by a mains adaptor only (not included). We’ve dispensed with the usual 9V battery option, both to save space and to allow us to adopt a high-current approach, yielding lower noise levels and superior tone.Origin Effects pedals are designed to deliver impeccable performance using a range of power supplies. We recommend you only use a regulated power supply specifically designed for guitar pedal applications as power supplies which do not have sufficient internal filtering can result in unwanted noise.We recommend the following power supplies for use with our pedals:Voodoo Labs Pedal Power seriesCioks suppliesTruetone 1 Spot Pro seriesStrymon ZumaThis product should only be operated at 9V. The design employs a voltage doubling circuit to achieve higher internal voltages for improved sonic performance.

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.