Doubledreamer

Description

Condition—Excellent. Functions perfectly. Cosmetically, it is very clean on top and sides with no defects, but has some velcro on the bottom. I can remove the velcro before shipping upon request. Power supply not included.DESCRIPTIONCreamy tones, detailed response and gain-wide articulation, times two: The Double Dreamer!Housing our two single overdrive units the Tubedreamer and Lucydreamer under one roof, the Double Dreamer hosts 3 unique key features that offer maximum tone variety, practicality and functionality in the smallest footprint possible while remaining 100% handmade just like all of our designs!— High-gain-stage footswitch— 3-way-toggle switch that routes the high-gain-stage footswitch to work with either the Tubedreamer, the Lucydreamer or both— Series/Parallel routing Internal dip switches that reroute the IN and OUT jacks to work as Send-Returns for each Overdrive side, allowing you to individually engage each side with your switcher, or place them in different points in your signal chain. If you are using a stereo setup you can pair the TD side with one amp and the LD side with another for lush parallel overdrive sounds!The Tubedreamer (Left Side) is our take on the legendary 808 Tubescreamer with a carefully tuned midrange frequency register delivering a warm and rich overdriven sound through any amp! A pivotal difference between the TD and other Tubescreamers, is that we chose to go with 3 diodes for asymmetrical clipping instead of symmetrical, enhancing the responsiveness of the pedal to fretting and picking nuances. The Tubedreamer employs the JRC4558D chip to deliver its classic sound, just like in the original, sought-after 808’s.The Lucydreamer (Right Side) is a Dry / Wet overdrive which has less of a mid hump than our Tubedreamer, and allows for more low end to come through. It can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube- amp-like break-up, all the way to full-bodied high-gain saturation with the assistance of the high-gain-stage footswitch, while effortlessly maintaining chord-voicing clarity! The “secret” chip it bases its sound on, along with its different clipping implementation compared to the TD, allow the Lucydreamer to pair perfectly with the TD adding layers of harmonic content on tap!Combine the two for new and exciting gain structures and assign the high-gain-stage footswitch to taste, making for up to six different gain-stages accessible in real time!*The Double Dreamer features soft-click (relay) switching.ARTISTS USING THE DOUBLE DREAMER:Kenny Wayne Shepherd, Alex Skolnick, Dweezil Zappa, Julien Kasper, Will BernardCONTROLSFootswitchesRight footswitch engages the Lucydreamer Left footswitch engages the Tubedreamer Middle footswitch engages the high-gain function Tubedreamer knobsLEVEL (left) controls the Tubedreamer’s output level TONE (left) adjusts the Tubedreamer’s tone GAIN (left) sets the Tubedreamer’s gain levelLucydreamer knobsMIX sets the blend ratio between the clean and overdriven signal for the Lucydreamer LEVEL (right) controls the Lucydreamer’s output level TONE (right) adjusts the Lucydreamer’s tone GAIN (right) sets the Lucydreamer’s gain levelAdditional controls3-way toggle-switch assigns the high-gain function as follows — Left assigns it to the Tubedreamer — Right assigns it to the Lucydreamer — Middle assigns it to bothLeft internal trimmer sets the high-gain stage output level for the Lucydreamer in relation to the low-gain-stage Right internal trimmer sets the high-gain stage output level for the TubeDreamer in relation to the low-gain-stageAdvanced Routing ControlsInternal dip-switches determine the Doubledreamer’s signal routing —UP—Series routing (Series: input → Lucydreamer → Tubedreamer → output) 2 left dip-switches UP & 2 right dip-switches DOWN—Parallel routing (Y mode: input signal splits to both overdrive circuits) 2 left dip switches DOWN & 2 right dip-switches UP. In order for this mode to work properly you will need two “Y” insert cables (stereo jack to two mono jacks—The IN jack becomes the Lucydreamer side’s breakout point (tip is input, ring is output) —The OUT jack becomes the Tubedreamer breakoutSPECIFICATIONS True Bypass Works with 9V DC adaptor (tip-negative) Power consumption: 110 mA Dimensions (jacks, pots etc. included): 13 x 10 x 5.1 cm / 5.1 x 3.9 x 2 inches Weight: 430g / 0.95 lbs.

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.