Riverside

Description

Feature rich only scratches the surface when describing Strymon products. The Strymon Riverside is a sleeper product in the line, and boasts a wealth of features including a noise gate, footswitch-able boost, and assignable expression pedal.  Ruggedly constructed and painstakingly engineered, Strymon is the Cadillac of pedals.The pedal is fully functional and listed as very good condition because it has no box and there is velcro on the bottom. Photos of the manual are in the listing.In the words of Strymon:STAGE ONE: Class A Analog JFET Input Gain Stage Touch response and dynamic interaction with your guitar are optimized with the class A JFET input gain stage. This analog gain stage is digitally controlled to maximize headroom and noise performance while adding as much as 20dB of analog gain.  STAGE TWO, THREE AND FOUR: Tube-Inspired DSP Gain Stages Our analysis of tube gain circuits has resulted in a wide-band series of cascading gain stages that are detailed, rich and full of complex harmonics. At each stage, more harmonics are generated and the signal dynamically evolves as the inter-stage circuitry optimally conditions the response for the following stage. VARIABLE CIRCUIT TUNING Riverside’s continuously variable circuit tuning dynamically tweaks multiple parameters as you adjust the Drive, optimizing the signal path to sit in the ‘sweet spot’ at any gain setting. This results in a super-versatile drive pedal that is equally comfortable providing sparking clean and mildly-overdriven tones, to high-gain lead and heavily saturated distortion.3-BAND EQ Riverside’s 3 band EQ, with independent Bass, Middle and Treble knobs, is designed to complement your amp’s tone with the flexibility needed to dial in your sound effectively and efficiently. The controls are post-drive, meaning they effectively sculpt and shape the harmonics generated in Riverside’s gain stages.PRESENCE SWITCH The minus (-) position provides clarity with a controlled top end that works well with many amps that have a brighter voice or extended top end character. The enhanced (center) position extends the top end to allow for more sizzle on high gain tones. This works well with amps that have a warmer voicing, or if you want enhanced detail in the uppermost frequencies. When plugging directly into a power amp, the plus (+) position further increases high end detail that may be required. The plus (+) position will also deliver extended high end detail to the darkest amps.PUSH SWITCH Adding a mid-band EQ push just after the analog front-end gain results in pushing the subsequent drive stages harder, and tightens up the response. This works great when looking for fat drive tones, or for pushing a distorted or on-the-edge amp into further breakup. For cleaner or more transparent tones, select the ‘normal’ position.GAIN SWITCH The ‘low’ channel selects a gain structure that allows for a wide range of low to medium gain sounds while still getting heavily overdriven at maximum Drive settings. The voicing is dynamic and touch-sensitive, and at high Drive settings is slightly ‘loose’ like a dimed vintage amp. The ‘high’ channel increases the gain throughout the signal path and tightens things up. While still staying clean at lower Drive settings, the ‘high’ gain mode goes to heavy crunch and high gain as the Drive knob is increased.

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.