Digital Tape Delay

Tap Tempo with Ratios - Use tap tempo to set the Tape Delays speed; the ratio selection makes fast tempos and triplet based phase times easy.
True Bypass and Trails. - The Empress Tape Delay Pedal employs true bypass, or you can choose to use buffered bypass with trails.
Analog Dry - The dry signal path is all analog.
Blips - Activate blips to get crazy sounds when you move the tape head around while playing
Presets - Advanced configuration allow you to run with 0, 2 or 3 presets
Relay Bypass - Using a relay for bypass means quieter switching and, if the pedal loses power, your signal will still pass unharmed.
Filter - Hi pass or low pass the delayed signal.
Modulation - Add a little or a lot of modulation, or none at all!

Specifications
Power Input Voltage: 9 - 18 V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: ~280mA
Input Impedance: 1Meg
Output Impedance: 1K
Frequency Response (-3dB): 8Hz - 18.5kHz
Input Headroom: +10.8dBu
Output Headroom: +10.2dBu
Distortion: 0.40%
Signal to Noise: 102.7dB
Delay Time: 5ms - 2.8s

https://empresseffects.com/products/tape-delay